Home Journals Articles Updates About
CN
image
收藏切换
Binder-mediated regulation of coating structure over monolithic catalyst and its performance in CH4-CO2 reforming
收藏切换
PDF
Junyang LIU1, 2, Yupeng LIU1, 2, Rulin XUE3, Lingji LIU1, Chaoyang ZHANG1, Feng LI2, Guoqiang LI2, Xiangdong GENG3, Lei LI2, *, Changzhen WANG1, *
Journal of Fuel Chemistry and Technology | 2026, 54(7) : 20260154-1286 - 20260154-1299
Less
收藏切换
Journal of Fuel Chemistry and Technology | 2026, 54(7): 20260154-1286-20260154-1299
• RESEARCH PAPER •
Binder-mediated regulation of coating structure over monolithic catalyst and its performance in CH4-CO2 reforming
Full
Junyang LIU1, 2, Yupeng LIU1, 2, Rulin XUE3, Lingji LIU1, Chaoyang ZHANG1, Feng LI2, Guoqiang LI2, Xiangdong GENG3, Lei LI2, *, Changzhen WANG1, *
Affiliations
  • 1Engineering Research Center of Ministry of Education for Fine Chemicals, Shanxi University, Taiyuan 030006, China
  • 2State Key Laboratory of Coal Conversion, Institute of Coal Chemistry, Chinese Academy of Sciences, Taiyuan 030001, China
  • 3Shanxi Xingxin Safety Production Technology Service Co., Ltd, Taiyuan 030008, China
About Author:

#

：These authors contributed equally to this work.

Published: 2026-07-10 doi: 10.1016/S1872-5813(26)60762-1
Outline
收藏切换

The CO2 dry reforming of methane (DRM) reaction represents a pivotal technology for CO2 utilization technology within the dual-carbon framework, offering significant advantages in carbon reduction, emission mitigation, and the production of value-added chemicals. However, research reports on shaped catalysts suitable for industrial-scale DRM processes remain limited. In this work, a monolithic catalyst was constructed using honeycomb cordierite as the structural support, and the effects of organic and inorganic binders on the coating structure and catalytic performance were systematically investigated. Comparative studies revealed that the active coating fabricated with an inorganic aluminum sol exhibited a continuous uniform morphology and demonstrated excellent adhesion strength. Simultaneously during high-temperature calcination, elemental diffusion within the Al2O3 networks bridged the cordierite surface with active catalyst particles, forming a (Ni-Mg)AlxO4 composite structure. This created robust “metal-support” interactions between active sites and the residual alumina matrix. The interconnected mesoporous framework provided superior pore confinement, which ultimately contributed to strong coating adhesion, enhanced activity and improved resistance to carbon deposition in the monolithic m-NCM-Al-sol catalyst. In contrast, mesoporous network coatings derived from inorganic silica sol suffered from coating detachment and catalytic activity loss due to heterogeneous surface structures and poor adhesion. Organic binders demonstrated inferior performance compared to inorganic binders in macroscopic coating uniformity, adhesion strength, mesoporous confinement capability and localized electronic effects, resulting in the poorest catalytic performance among modified samples. Furthermore, by optimizing the aluminum sol coating process parameters such as binder content, active component dosage, and coating cycles, a synergistic balance between coating thickness and mass transfer performance was achieved. The optimized integrated catalyst demonstrated excellent performance in DRM reactions. This work provides valuable insights for controlling and constructing high-performance shaped catalysts with cordierite coatings.

dry reforming of methane  /  monolithic catalyst  /  aluminum sol  /  mesoporous framework coating  /  dual diffusion mechanism
刘俊洋, 刘玉鹏, 薛汝琳, 刘玲技, 张超阳, 李枫, 李国强, 耿向东, 李磊, 王长真. 黏结剂对整体式催化剂涂层结构调控及CH4-CO2重整性能研究. 燃料化学学报（中英文）, 2026 , 54 (7) : 20260154-1286 -20260154-1299 . DOI: 10.1016/S1872-5813(26)60762-1
Junyang LIU, Yupeng LIU, Rulin XUE, Lingji LIU, Chaoyang ZHANG, Feng LI, Guoqiang LI, Xiangdong GENG, Lei LI, Changzhen WANG. Binder-mediated regulation of coating structure over monolithic catalyst and its performance in CH4-CO2 reforming[J]. Journal of Fuel Chemistry and Technology, 2026 , 54 (7) : 20260154-1286 -20260154-1299 . DOI: 10.1016/S1872-5813(26)60762-1
Full Text
Less
Against the backdrop of global warming and the accelerating shift towards green, low-carbon energy, the synergistic conversion of CO2 and CH4 has attracted considerable attention for its potential to mitigate greenhouse gas emissions. The dry reforming of methane (DRM) enables the direct conversion of CO2 and CH4 into syngas (H2/CO = 1), which is highly valuable for downstream industrial processes such as Fischer-Tropsch synthesis and methanol production[1−6]. However, DRM is a highly endothermic reaction that typically operates at 700−900 ℃. Under these severe conditions, metal sintering and carbon deposition can readily occur, resulting in rapid catalyst deactivation[7−10]. Among various catalyst systems, Ni-based catalysts are regarded as the most promising candidates for industrial DRM applications owing to their high activity in CH4 activation and relatively low cost[11−12]. Nevertheless, the strong C−H bond cleavage capability of Ni tends to accelerate deep dehydrogenation and coke formation, while high-temperature conditions further exacerbate metal sintering[13−14]. In this context, layered double hydroxide (LDH)-derived mixed metal oxides have shown remarkable advantages in suppressing both sintering and coke deposition owing to their high metal dispersion, excellent thermal stability, and tunable basic sites[15−17]. Despite these advances, current studies mainly focus on powder catalysts, which suffer from high pressure drop, limited mass transfer, and poor mechanical stability in practical applications[18−19]. In contrast, monolithic catalysts featuring ordered honeycomb channels offer superior heat and mass transfer characteristics, lower pressure drop, and enhanced structural stability. In particular, cordierite-based monoliths have been widely applied in industrial catalytic processes. Nevertheless, the effective fabrication of monolithic DRM catalysts still faces critical challenges, especially regarding the insufficient adhesion strength between active coatings and substrates under high-temperature conditions. Moreover, the role of binders in regulating coating morphology, pore architecture, and metal-support interactions remains inadequately understood. Therefore, in this work, monolithic Ni-Co-based DRM catalysts were fabricated using a LDH-derived Ni-Co/Mg(Al)O as the active coating. The effects of inorganic and organic binders on the coating structure and catalytic performance were systematically investigated, along with the optimization of cordierite pretreatment and coating process parameters. This study aims to provide theoretical guidance for the design and engineering application of highly efficient monolithic DRM catalysts.
1　Experimental
Less
1.1　Cordierite pretreatment
Cordierite honeycomb monoliths with a cell density of 400 cpsi were selected as the support and cut into cuboids with dimensions of 0.5 cm × 0.5 cm × 2 cm. The monoliths were first rinsed with deionized water and subsequently ultrasonically cleaned in deionized water for 20 min to remove residual dust inside the channels. After drying, the cordierite monoliths were immersed in 28% nitric acid solution for acid etching for 12 h. The treated samples were then repeatedly washed with deionized water until neutral pH was reached, followed by drying. Finally, the samples were calcined in air at 500 °C for 5 h and naturally cooled to room temperature before use.
1.2　Preparation of the pristine NCM catalyst
A metal salt solution A was prepared by dissolving measured amounts of Ni(NO3)2·6H2O, Co(NO3)2·6H2O, Mg(NO3)2·6H2O and Al(NO3)3·9H2O in 150 mL of deionized water. Separately, 200 mL NaOH solution (1.0 mol/L) and Na2CO3 solution (0.5 mol/L) were prepared. The Na2CO3 solution was placed in a beaker and heated to 65 °C under magnetic stirring. Subsequently, solution A and the NaOH solution were simultaneously added dropwise while maintaining the pH value of the system within the range of 9.5−10.0. After complete addition, the resulting suspension was continuously stirred and aged for 24 h. The obtained precipitate was collected by filtration, dried at 80 °C for 12 h, and calcined in air at 800 °C for 5 h, ultimately yielding the pristine NCM catalyst derived from the topotactic transformation of the LDH precursor.
1.3　Preparation of monolithic m-NCM-X catalysts
Different binders, including hydroxyethyl cellulose (HEC), silica sol (Si-sol), and alumina sol (Al-sol), were employed for the preparation of monolithic m-NCM-X catalysts (X = HEC, Al-sol, and Si-sol). Typically, 2.5 g of the pristine NCM catalyst was placed in a beaker, followed by the addition of an appropriate amount of deionized water and binder (the binder content accounted for 3% of the total slurry). The mixture was then transferred into a ball mill and milled for 1 h to obtain a homogeneous and stable coating slurry. The pretreated cordierite monolith was immersed into the prepared slurry for several minutes to ensure sufficient penetration of the slurry into the honeycomb channels. Subsequently, the monolith was removed, and excess slurry inside the channels was removed by air blowing. The coated monolith was then dried at 80 °C for 1 h, which was defined as one coating cycle. The immersion-drying procedure was repeated and the coating loading was controlled by a weight-gain method based on the mass change of the cordierite monolith before and after coating, until the desired final specific loading (0.1 g catalyst/0.8 g cordierite support) was achieved. The coated samples were finally calcined in air at 700 °C to obtain the monolithic Ni-Co/Mg(Al)O catalysts, denoted as m-NCM-X. In addition, the residual slurry after coating was dried and calcined in air at 700 °C to obtain the corresponding active coating reference samples, denoted as NCM-X.
The preparation procedure of m-NCM-Al-sol catalysts with different Al-sol contents was similar to that described above, except that the Al-sol content was adjusted to 1%, 3%, 5% and 7%, respectively. Similarly, catalysts with different active component loadings were prepared by varying the amount of pristine NCM catalyst in the slurry (1, 2.5 and 5 g), while keeping the other preparation conditions unchanged.
1.4　Catalyst characterization
The crystal structure, textural properties, and surface chemical states of all synthesized catalysts were systematically characterized using various techniques. Powder X-ray diffraction (XRD) patterns were recorded on a Bruker D8 Advance diffractometer with Cu Kα radiation (λ = 0.15406 nm) operated at 40 kV and 40 mA. The diffraction data were collected in the 2θ range of 10°−90° at a scanning rate of 0.1(°)/s. The textural properties of the catalysts were analyzed by N2 adsorption-desorption measurements using a Micromeritics ASAP 2020 automated physical adsorption analyzer. Prior to measurement, the samples were pretreated at 300 °C under N2 atmosphere for 6 h. The adsorption-desorption isotherms were obtained at −196 °C under liquid nitrogen conditions. The specific surface area was calculated using the Brunauer-Emmett-Teller (BET) method, while the pore size distribution was determined by the Barrett-Joyner-Halenda (BJH) model. The macroscopic morphology, surface structure, cross-sectional thickness of the monolithic m-NCM-X catalysts was characterized using a JSM-7001F field-emission scanning electron microscope (SEM) operated at 10 kV. H2 temperature-programmed reduction (H2-TPR) measurements were carried out on a TP-5067 chemisorption analyzer. Typically, 0.05 g of catalyst (40−60 mesh) was heated from room temperature to 900 °C at a heating rate of 10 °C/min under a 10% H2/Ar flow (20 mL/min). The H2 consumption was monitored using a thermal conductivity detector (TCD). X-ray photoelectron spectroscopy (XPS) analysis was performed on an AXIS SUPRA spectrometer equipped with a monochromatic Al Kα X-ray source at a pass energy of 40 eV. All spectra were calibrated using the C 1s peak as the reference. Thermogravimetry-differential scanning calorimetry analysis (TG-DSC) was conducted on a NETZSCH STA-409 instrument. Approximately 30 mg of spent catalyst was heated from room temperature to 800 °C at a heating rate of 10 °C/min under air atmosphere, and the corresponding weight loss was recorded. Raman spectra were collected on a Horiba Scientific LabRAM HR Raman spectrometer using a 532 nm laser source with a laser power of 0.1 mW. The coating adhesion strength was evaluated according to the coating weight loss ratio obtained from ultrasonic vibration tests. The calcined monolithic catalysts were immersed in deionized water and subjected to ultrasonic treatment for a total duration of 30 min. Samples were removed every 5 min, dried, and weighed. The coating weight loss ratio was calculated based on the mass change before and after ultrasonic treatment, thereby evaluating the adhesion strength between the coating layer and the cordierite substrate. In addition, the mechanical properties of the monolithic catalysts were evaluated by compressive strength measurements. Both the coating adhesion strength and compressive strength tests were conducted in triplicate, and the average values obtained from parallel experiments were used as the final reported data to ensure good reliability and reproducibility.
1.5　Catalytic performance evaluation
The DRM reaction was carried out in a fixed-bed reactor under atmospheric pressure (Figure 1). The monolithic m-NCM-X catalyst was loaded into a quartz reaction tube with an inner diameter of 8 mm, and the remaining space was filled with quartz sand. Prior to the reaction, the catalyst was reduced at 750 °C under an H2/N2 atmosphere (1∶2). Subsequently, a reactant gas mixture with a CH4/CO2 ratio of 1∶1 was introduced for catalytic performance evaluation at a gas hourly space velocity (GHSV) of 36000 mL/(h·g). The reaction products were analyzed online using a gas chromatograph.
The conversion (X) of the catalysts during catalytic performance evaluation was calculated as follows:
$ {{x}}_{{i}}=\frac{{\left[{F}_{i}\right]}_{\text{in}}-[{{{F}_{i}}]}_{\text{out}}}{{\left[{F}_{i}\right]}_{\text{in}}}\times 100\% $
The H2/CO ratio was calculated as follows:
$ \frac{{\text{H}}_{2}}{\text{CO}}=\frac{{\left[{F}_{{{{\mathrm{H}}}_{2}}}\right]}_{\text{out}}}{{\left[{F}_{{\mathrm{CO}}}\right]}_{\text{out}}}\times 100\% $
where $\left[{F}_{i}\right]}_{\text{in}} $ and $\left[{F}_{i}\right]}_{\text{out}} $ represent the inlet and outlet gas flow rates (mL/min), respectively. The carbon balance during the reaction was maintained within 100% ± 5%.
2　Results and discussion
Less
2.1　Cordierite pretreatment
In a typical dip-coating process, the amount of the pristine catalyst retained on the substrate is generally determined by the surface roughness of the cordierite substrate, the rheological properties of the slurry, and surface tension. In particular, surface grooves and pores on the cordierite substrate can provide anchoring sites for the coating slurry. Therefore, acid pretreatment of the pristine cordierite is employed to increase its surface roughness, which is beneficial for the sufficient penetration and adhesion of the slurry during the subsequent dip-coating process. As shown in Figure 2, the XRD patterns of the cordierite before and after acid pretreatment exhibit distinct diffraction peaks at 2θ = 10.3°, 21.6°, 26.3°, 28.1°, 29.3°, 53.3° and 57.9°, which correspond to the cordierite phase Mg2Fe2Al4Si5O18 (JCPDS No. 09-0472).
No obvious shift in diffraction peak positions or formation of new crystalline phases was detected after pretreatment, indicating that the acid etching process did not induce detectable phase transformation or structural degradation of the cordierite framework. However, a slight decrease in the relative intensity of several characteristic peaks was observed after acid treatment, which may be attributed to the etching effect of H+ on the originally smooth cordierite surface, resulting in the formation of surface pits.
The evolution of the cordierite surface morphology, observed by SEM (Figure 2(b), (c)), further supports the above interpretation. The untreated pristine cordierite exhibited a relatively smooth, plate-like surface, whereas numerous etched grooves and pores appeared on the acid-treated cordierite surface. In addition, textural characterization revealed that the specific surface area of the acid-treated cordierite (11.99 m2/g) was approximately twice that of the pristine cordierite (5.38 m2/g), accompanied by increases in both pore volume and pore diameter (Table 1). These changes can be attributed to the acid leaching of Al3+ and Mg2+ species from the surface and interior of cordierite during the pretreatment process, which increased the surface roughness and enlarged the pore volume and pore size, thereby generating more surface voids. Therefore, the acid pretreatment effectively constructed a rough surface/interface favorable for the adhesion and anchoring of active coatings without destroying the crystalline structure of the cordierite.
2.2　Interfacial regulation and anti-peeling effect analysis of m-NCM-X catalyst coatings
Figure 3(a) presents the XRD patterns of the calcined NCM-X samples prepared using different binders. All catalysts exhibited characteristic diffraction peaks at 2θ = 37.2°, 43.3°, 62.8°, 74.8° and 78.8°, which can be assigned to the rock-salt-type (Mg, Ni, Co, Al)O solid solution phase. In addition, weak diffraction peaks observed at 2θ = 31.3° and 65.2° correspond to the (220) and (440) crystal planes of the MgAl2O4 spinel phase (JCPDS No. 21-1152), respectively. These results indicate that the introduction of different binders has little influence on the primary crystalline phase structure of the catalysts. SEM was used to investigate the macroscopic morphology, surface structure, and cross-sectional thickness of the monolithic m-NCM-X catalysts, aiming to elucidate the influence of binder type on the surface uniformity and coating thickness of the active coating. Figure 3(b) shows the macroscopic morphology and surface distribution of the active coating prepared using the organic binder HEC. Compared with the bare cordierite substrate, the active coating particles aggregated into large clusters, resulting in uneven coverage of the cordierite wall surface and partial channel blockage. It should be noted that such non-uniform structures may lead to poor adhesion, wall cracking or structural defects, which can further induce coating spallation and active metal sintering under high-temperature reaction conditions due to thermally induced stress generated by uneven heat and mass transfer. These phenomena are often considered major causes of monolithic catalyst deactivation. When inorganic Si-sol was used as the binder, the surface structure showed some improvement, yet the overall distribution of the active coating remained unsatisfactory. In contrast, the inorganic Al-sol binder yield a well-distributed coating structure with integrity of the honeycomb channels. Further surface morphology (Figure 3(e)) and cross-sectional observations (Figure 3(f)) revealed that the active coating layer in m-NCM-Al-sol adhered tightly to the cordierite interface, exhibiting a continuous outer surface, a uniform thickness (~20.6 μm), and no observable cracks. It is worth noting that the acid-etched cordierite surface originally contained numerous grooves and depressions, whereas the nearly flat surface of m-NCM-Al-sol confirms that the alumina-sol-derived coating could effectively wet and fill the surface defects of cordierite. This uniform coating structure is beneficial for efficient heat transfer and strong interfacial adhesion during the reaction process, while simultaneously avoiding channel blockage and maintaining a high dispersion of active sites. Consequently, a favorable balance between interfacial adhesion strength and mass transfer performance was achieved, which may contribute to enhanced reforming activity and catalytic stability.
To further elucidate the effect of different binders on the microscopic pore structure of the active coatings, the textural properties of NCM-X (X = HEC, Al-sol and Si-sol) coating catalysts were characterized by N2 adsorption-desorption measurements. As shown in Figure 4(a), all catalysts exhibited typical type-IV adsorption isotherms of mesoporous materials. Notably, the pristine NCM catalyst displayed a distinct H3-type hysteresis loop, which can be attributed to slit-shaped pores formed by the stacking of plate-like particles. In contrast, the binder-modified NCM-X catalysts exhibited H2-type hysteresis loops, indicating the presence of typical “ink-bottle” pores or interconnected tubular pores with non-uniform pore-size distributions. In addition, the NCM-X coating catalysts reached adsorption saturation at relatively low relative pressures, suggesting the presence of smaller mesopores. The pore-size distribution shown in Figure 4(b) further confirms that the pore diameters of the active coatings were mainly concentrated in the range of 10−20 nm, which is significantly smaller than that of the pristine NCM catalyst. The specific regulatory effects of different binders on the textural parameters are summarized in Table 2.
Among them, the catalysts prepared using inorganic binders (NCM-Al-sol and NCM-Si-sol), exhibited higher specific surface areas (162.8 and 153.6 m2/g, respectively) and smaller mesopore sizes (11.85 and 11.53 nm, respectively). In contrast, the catalyst prepared using the organic binder showed the largest average pore diameter and pore volume. It should be noted that although all NCM-X catalysts possessed mesoporous characteristics, the origin of their porosity differed. In NCM-Al-sol and NCM-Si-sol, the mesoporous structure mainly originated from the rigid framework formed by the high-temperature polycondensation of inorganic sols that interconnected the active particles. In contrast, the mesoporous structure of NCM-HEC was mainly derived from the voids generated after the removal of the organic binder during calcination, resulting in relatively broader mesopores and a weaker confinement effect. Similar phenomena were reported by Agueniou et al.[20], who pointed out that, given the negligible intrinsic porosity of cordierite, alumina sol as a binder favored the formation of new pores smaller than 10 nm between catalyst particles. A high specific surface area is essential for the dispersion of active species and the exposure of abundant catalytic active sites, while small-sized mesopores can provide an effective confinement effect during DRM reactions. On the one hand, the confined pore space can suppress the continuous three-dimensional growth of carbon species, thereby facilitating coke gasification and removal. On the other hand, the interconnected mesoporous network can physically isolate active metal particles through pore-wall confinement, effectively inhibiting surface migration and sintering of metal nanoparticles under high-temperature reaction conditions. These results further demonstrate that the Al-sol-derived slurry can form a strongly adherent Al2O3 framework with an interconnected mesoporous confinement networks, uniform heat/mass transfer characteristics, and a high specific surface area on the cordierite surface after the coating process.
Since organic binders are inevitably oxidized and removed during thermal treatment, they are unable to form a rigid framework layer or establish effective interactions with active particles. In contrast, inorganic binders undergo polycondensation and crystallization at high temperature, generating a mesoporous network framework layer that adhered to the cordierite interface and embedded dispersed active particles, thereby forming a support layer with distinct interactions toward the active species. Accordingly, XPS and H2-TPR analyses were performed to investigate the surface chemical states and possible metal-support interactions of the reduced NCM-X catalysts (Figure 5). For the NCM-HEC catalyst prepared using the organic binder, the Ni 2p3/2 spectrum exhibited a Ni0 characteristic peak at 851.9 eV, which is close to the metallic Ni peak (~852.0 eV) previously reported for LDH-derived solid-solution catalysts[21−23], indicating the formation of active metallic Ni species after reduction. In comparison, the Ni0 peaks of the catalysts prepared using inorganic binders shifted to lower binding energies (851.7 eV for NCM-Si-sol and 851.5 eV for NCM-Al-sol, respectively). In particular, the Ni0 peak of NCM-Al-sol was downshifted by approximately 0.4 relative to NCM-HEC and 0.2 eV relative to NCM-Si-sol, respectively, suggesting a significant increase in the electron density around Ni sites, which is generally associated with stronger metal-support interactions[24]. Further semi-quantitative analysis of the Ni0/Ni2+ ratio (Table 3) revealed that NCM-Al-sol possessed the highest Ni0 proportion (63.5%), followed by NCM-Si-sol (60.5%) and NCM-HEC (58.7%). Meanwhile, Co0 characteristic peaks were observed at approximately 775.6−776.2 eV in the Co 2p3/2 spectra of all catalysts, confirming the formation of Ni-Co alloy phases[25].
In addition, the Mg 1s spectra showed that the Mg2+ binding energies of catalysts prepared using inorganic binders were higher than that of NCM-HEC prepared using the organic binder, with NCM-Al-sol exhibiting the highest Mg 1s binding energy (1303.9 eV). This result indicates stronger interactions between Mg and Ni in the inorganic-binder-modified catalysts, especially in NCM-Al-sol, where obvious charge redistribution toward neighboring Ni species may occur. Interestingly, the Al 2p spectra exhibited a distinct trend: only the NCM-Al-sol catalyst showed a significant increase in Al 2p binding energy (74.3 eV), whereas the other two catalysts exhibited nearly identical values (~74 eV). This trend aligns well with the negative shift of the Ni peak, implying that part of the electron density from the framework Al species was transferred to Ni, thereby increasing the electron density around Ni sites[26]. These results suggest that strong interactions were established between the active particles and the Al2O3 mesoporous support framework derived from Al-sol after calcination and reduction, leading to the formation of a (Ni-Mg)AlxO4 composite structure[27]. Evidently, catalysts prepared using inorganic binders, particularly Al-sol, can effectively regulate the local electronic environment of the alloy phase through enhanced metal-support interactions, which is beneficial for CH4 activation during the DRM reaction[28].
Further evidence was provided by the H2-TPR results (Figure 5(e)). The main reduction peaks in the range of 750−850 °C are generally attributed to the reduction of Ni species strongly interacting with the support[29]. Marked differences in the reduction profiles were observed among catalysts prepared using different binders. NCM-HEC exhibited the lowest main reduction peak temperature (776 °C), whereas the reduction peaks of NCM-Al-sol and NCM-Si-sol shifted toward higher temperatures overall. In particular, the reduction peak of NCM-Al-sol located near 800 °C can be assigned to NiAl2O4 crystalline phases or Ni species embedded within the Al2O3 support framework through strong metal-support interaction (SMSI). Chava et al.[30] reported a coating reconstruction phenomenon during a study on the effect of calcination time on Ni/γ-Al2O3-coated monolithic catalysts, in which a bidirectional diffusion mechanism occurred during high-temperature calcination: surface Ni species diffused inward into the coating, while Mg/Si species from the cordierite substrate simultaneously diffused outward into the coating layer, ultimately forming a MgAl2O4/NiAl2O4 mixed phase within the coating. Combined with the physicochemical characterization results of the NCM-X catalysts, a similar process is proposed for NCM-Al-sol during high-temperature calcination. Specifically, elevated temperatures promoted the diffusion of active particles into the Al2O3 mesoporous framework derived from Al-sol, resulting in the formation of a (Ni-Mg)AlxO4 composite structure with strong SMSI characteristics. Such a composite structure can be reduced at high temperature to generate highly stable and active Ni-Co alloy phases with small particle sizes. Meanwhile, the intrinsic Al(Mg)Ox species from the cordierite substrate may gradually diffuse into the coating layer during prolonged high-temperature calcination and form bridging interactions with the Al-sol-derived Al2O3 mesoporous framework. This process improved thereby the coating distribution, adhesion strength, and the local electronic environment of the active metals. In contrast, although Si-sol formed an interconnected mesoporous SiO2 network during calcination, the lack of sufficient Al species hindered the formation of additional (Ni-Mg)AlxO4 composite structures. Consequently, the coating reconstruction process driven by the bidirectional diffusion mechanism was less effective, resulting in weaker interactions with both the cordierite interface and active particles, as well as inferior coating distribution. For the organic binder, the polymer chains gradually decomposed, oxidized, and burned off during high-temperature calcination, ultimately leaving the active particles in a loosely aggregated state after binder removal. Consequently, this led to the weakest interaction strength and poorest coating distribution. The FE-SEM results (Figure 3(e), (f)) further support the above interpretation, indicating that the calcined mesoporous Al2O3 network played a critical bridging role between the cordierite interface and the NCM active particles, which also implies the superior anti-peeling capability of the NCM-Al-sol coating.
The adhesion performance tests (Figure 6 and Table 4) further demonstrate the critical bridging role of the Al2O3 mesoporous framework and the anti-peeling property of the active coating in the monolithic m-NCM-Al-sol catalyst. As the ultrasonic treatment time increased from 5 to 30 min, the weight loss ratios of all catalysts gradually increased, indicating that ultrasonic vibration weakened the interfacial stability between the coating layer and the support. Among them, the m-NCM-HEC catalyst prepared using the organic binder exhibited a relatively high weight loss, reaching approximately 3.6% ± 0.06% after 30 min, followed by m-NCM-Si-sol catalyst (3.94% ± 0.12%). In contrast, the m-NCM-Al-sol catalyst exhibited the best coating adhesion performance, with a weight loss of only 1.82% ± 0.08% after 30 min. This superior adhesion behavior can be attributed to the interfacial structural reconstruction between the Mg/Al species originating from the cordierite substrate and the Al-sol-derived Al2O3 support layer during high-temperature calcination. Table 4 further summarizes the compressive strengths of the monolithic m-NCM-X catalysts. The results indicate that the m-NCM-Al-sol catalyst exhibited the highest compressive strength (17.83 ± 0.25 MPa), followed by m-NCM-Si-sol (16.03 ± 0.35 MPa), while the organic-binder-modified m-NCM-HEC catalyst showed significantly lower compressive strength (12.86 ± 0.40 MPa). These results suggest that inorganic binders, particularly alumina sol, can preserve the intrinsic mechanical strength of the cordierite substrate to the greatest extent. Evidently, the lowest weight loss ratio and highest compressive strength of m-NCM-Al-sol indicate the formation of stronger interfacial chemical bonding between the active coating and the cordierite wall surface. Overall, compared with the organic binder and Si-sol, the use of Al-sol can bridge the cordierite substrate and active particles during the phase transformation process induced by high-temperature calcination. Ultimately, this formed an interconnected pore-confinement network, yielding a continuous crack-free coating with excellent anti-peeling properties. Simultaneously, it promoted charge redistribution through strong metal-support interactions and created mesoporous framework confinement at the microscopic level.
2.3　Catalytic performance evaluation of monolithic m-NCM-X catalysts
To investigate the effect of different binders on the DRM performance of m-NCM-X catalysts, catalytic activity tests were conducted at 1 atm, 700 °C, a gas hourly space velocity (GHSV) of 36 L/(g·h), and a CH4/CO2 ratio of 1∶1. As shown in Figure 7(a), the initial CH4 conversion followed the order of m-NCM-Al-sol (73%) > m-NCM-HEC (71.6%) > m-NCM-Si-sol (70.7%). In line with the XPS-derived differences in strong metal-support interaction (SMSI), the enhanced activity of the inorganic-binder catalysts can be attributed to enhanced electronic transfer, which strengthened the activation of C−H bonds in adsorbed CH4 species on Ni sites. In particular, the AlOx species provided by Al-sol induced the strongest SMSI and charge redistribution with the metal sites, thereby leading to the highest catalytic activity. During prolonged reaction time, marked differences in catalyst stability were observed among the m-NCM-X catalysts. The catalysts prepared using inorganic binders exhibited clearly superior stability compared to those prepared using the organic binder. Among them, m-NCM-Al-sol showed the best stability, with the CH4 conversion decreasing by only approximately 2.6% after 30 h of reaction. In comparison, m-NCM-Si-sol exhibited moderate stability, with a CH4 conversion decrease of approximately 7.9%, whereas, the m-NCM-HEC catalyst prepared using the organic binder deactivated most rapidly, with the CH4 conversion sharply dropping to 53% after 30 h (a loss of 18.6%). As shown in Figure 7(b), the variation trend of CO2 conversion closely mirrored that that of CH4 conversion, further confirming the crucial role of binder type in regulating the performance of monolithic catalysts. As illustrated in Figure 7(c), the H2/CO ratio of all catalysts remained around 0.83, which can be attributed to the reverse water-gas shift (RWGS) side reaction that consumes H2 and produces additional CO[31].
TG-DSC and Raman analyses were performed on the spent m-NCM-X catalysts to probe the catalyst deactivation mechanism with a focus on carbon deposition. As shown in the TG-DSC curves (Figure 7(d)), all catalysts underwent a slight weight loss within the range of 50−200 °C, accompanied by weak DSC signals, which was generally attributed to the removal of adsorbed water. In the temperature range of 200−300 °C, the slight weight increase was usually associated with the oxidation of metal species. Notably, prominent weight loss occured for all catalysts within 300−750 °C, corresponding mainly to the combustion of deposited carbon species. Among the catalysts, the catalyst prepared using the organic binder HEC exhibited the highest weight loss (24.2%), indicating severe carbon deposition. In contrast, catalysts prepared using inorganic binders showed lower weight losses. The values fo m-NCM-Si-sol and m-NCM-Al-sol were recorded at 16.8% and 13.2%, respectively. The DSC profile of m-NCM-HEC displayed the highest peak temperature (645 °C), consistent with the combustion of highly graphitized carbon. The DSC signal of m-NCM-Si-sol became broader and shifted toward lower temperatures, indicating a decrease in both the amount and crystallinity of the deposited carbon. In comparison, m-NCM-Al-sol exhibited the weakest thermal combustion signal and the lowest peak temperature (503 °C), confirming its superior ability to suppress the formation of inert carbon species during the DRM reaction. The Raman spectra further verified the above results. The D band (~1340 cm−1) and G band (~1580 cm−1) correspond to amorphous and graphitic carbon, respectively. Comparison of the ID/IG ratios further revealed distinct carbon structures, which increased in the order of m-NCM-HEC (1.08) < m-NCM-Si-sol (1.12) < m-NCM-Al-sol (1.26). Among them, m-NCM-Al-sol exhibited the highest ID/IG ratio, indicating that the deposited carbon was mainly amorphous carbon, which is more readily oxidized and removed. In addition, adhesion stability tests were performed on the spent m-NCM-X catalysts after the high-temperature DRM reaction (Figure 7(f)). The results further corroborate the conclusion that monolithic m-NCM-Al-sol exhibited superior resistance to coating spallation at high temperatures.
Even after 30 h of DRM reaction, excellent adhesion was maintained, with the coating showing minimal loss (2.18% ± 0.05%). In contrast, the spent m-NCM-HEC and m-NCM-Si-sol catalysts exhibited substantially higher ultrasonic-induced mass losses of about 6.40% ± 0.17% and 6.46% ± 0.21% respectively after 30 min. Notably, these values were significantly larger than those of the freshly calcined samples, indicating progressive deterioration of their coating adhesion strengths under high-temperature and high-space-velocity reaction conditions. During the DRM reaction, insufficient bonding between the active coating and the cordierite substrate, along with structural defects such as cracks or poor mechanical strength, can induce local thermal stress at high temperatures, thereby leading to coating spallation, active phase migration, particle aggregation, and ultimately leading to catalyst deactivation[32−33]. Moreover, carbon deposition on metal surfaces under high-temperature conditions represents another major deactivation pathway. Based on the comprehensive physicochemical characterization and adhesion stability tests before and after reaction, the coating derived from the organic binder HEC possessed a loose structure, unstable interfacial bonding, weak interfacial electronic interaction and limited pore-confinement effect, thereby resulting in the poorest catalytic performance. Although the inorganic binder Si-sol generated a mesoporous structure similar to that of Al-sol, its discontinuous coating distribution and relatively weak adhesion led to inadequate resistance to spallation at high temperatures. In contrast, the strongly bonded mesoporous network framework formed from Al-sol after calcination provided a more uniform and stable architecture, which facilitated efficient heat and mass transfer. Meanwhile, the interconnected mesoporous framework also promoted coke gasification through spatial confinement effects, thereby effectively mitigating the risks of deactivation by carbon deposition and coating failure.
2.4　Adhesion mechanism of the anti-peeling coating in m-NCM-Al-sol, mesoporous confinement and local electronic effects
Based on the above results, a possible mechanism is proposed to elucidate the influence of different binders on the coating structure and catalytic performance of monolithic catalysts. In the system employing the organic binder, the continuous organic adhesive layer formed by HEC, which encapsulates the active particles initially, undergoes decomposition of its long-chain carbon structures during high-temperature calcination. Subsequently, oxidation and removal of the organic components induce significant coating shrinkage and stress concentration, causing the active particles to aggregate and form loosely packed mesoporous structures[34]. Under continuous thermal stress, cracks gradually initiate and propagate within the coating, evolving into cohesive or interfacial failure, ultimately leading to coating agglomeration, non-uniform distribution, and severe cracking. As a result, under conditions of accumulated thermal stress, the coating becomes prone to spallation, metal sintering, and deactivation via coking during high-temperature reactions[35]. These results indicate that organic binders mainly provide temporary physical adhesion and are incapable of forming a rigid mesoporous support framework. This inherent limitation makes it challenging to maintain stable structural support and confinement effects under high-temperature conditions. When inorganic Si-sol was employed as the coating binder, the layer of SiO2 colloidal particles layer encapsulating the active particles underwent dehydration and condensation during calcination and interconnected, forming a continuous mesoporous inorganic network framework. As the temperature increased, the coating gradually solidified developing a mesoporous framework that provided a degree of spatial confinement. However, due to the absence of external Al species required for reconstructing the (Ni-Mg)AlxO4 coating structure via the bidirectional diffusion mechanism, the interactions between the solidified SiO2 network, the cordierite interface and the active particles remained relatively weak. Consequently, the coating was prone to cracking due to accumulated thermal stress during high-temperature calcination, leading to a significant degradation in its adhesive properties. Therefore, although m-NCM-Si-sol exhibited improved coking resistance owing to its mesoporous confinement effect, its overall structural stability was limited being compromised by its relatively poor adhesion and resistance to spallation. In contrast, the inorganic Al-sol binder transformed into a continuous and compact mesoporous network structure upon calcination and established stable interfacial connections between the active particles and the cordierite substrate (Figure 8). On the one hand, the Al-sol-derived coating infiltrated and filled the surface defects of cordierite and subsequently formed a “bridging-anchor” structure between the cordierite interface and active particles during the high-temperature-induced phase transformation[36−37]. This significantly enhanced the coating adhesion strength and surface uniformity, thereby improving the coating’s resistance to spallation under prolonged high-temperature reaction conditions. On the other hand, the embedding of active particles into the Al2O3 mesoporous framework formed a (Ni-Mg)AlxO4 composite structure, creating strong metal-support interactions. This structure ensured high dispersion of active particles within the coating and promoted electron transfer from framework Al species to Ni after reduction, thereby enhancing catalytic activity. Meanwhile, the inherent confinement effect of the interconnected Al2O3 mesoporous channels effectively restricted the uncontrolled growth of carbon species and facilitated coke gasification. As a result, the monolithic m-NCM-Al-sol catalyst exhibited excellent coating structural integrity and superior stability in catalytic performance.
2.5　Optimization of coating process parameters for monolithic catalysts
After identifying alumina sol as the optimal binder, the effects of key coating process parameters, including Al-sol content, pristine catalyst loading amount, and coating cycles, on the performance of the m-NCM-Al-sol catalyst were systematically investigated to gain deeper insight into the relationship between coating structure and catalytic behavior. As shown in Figure 9, the Al-sol content significantly influenced catalytic performance. Among the samples, m-NCM-3%-Al-sol exhibited the highest and most stable CH4 and CO2 conversions, whereas lower (1%) or higher (5%−7%) Al-sol contents led to performance degradation. At low binder content, the coating layer was relatively thin and incomplete, resulting in weak interfacial adhesion and non-uniform dispersion of active species. Conversely, excessive Al-sol content produced a thicker and denser coating that partially blocked the channels, thereby increasing diffusion resistance. Catalytic performance exhibited a volcano-shaped dependence on the amount of pristine catalyst loaded, with the 2.5 g formulation demonstrating the optimal activity and stability. Insufficient loading provided an inadequate number of active sites, while excessive loading tended to induce overly thick coatings and particle agglomeration. Furthermore, the number of coating cycles markedly affected catalyst performance.
Compared with one or three coating cycles, two coating cycles produced a more uniform and continuous coating structure, thereby significantly enhancing both catalytic activity and stability. Notably, the H2/CO ratio remained nearly constant within the range of 0.80–0.85 across all preparation conditions (not shown), indicating that the coating parameters mainly influenced catalytic performance through regulating structural characteristics and mass-transfer behavior, with minimal impact on the reaction pathway.
3　Conclusion
Less
In summary, monolithic m-NCM-X catalysts for DRM reactions were successfully prepared via a dip-coating process, and the effects of inorganic and organic binders on the coating structure and catalytic performance of the monolithic catalysts were systematically investigated, together with the corresponding mechanism analysis. The results demonstrate that the alumina-sol-modified m-NCM-Al-sol catalyst formed a reconstructed coating with a (Ni-Mg)AlxO4 composite structure through the elemental diffusion mechanism between the cordierite substrate and active particles during the high-temperature phase transformation process. This coating exhibited a uniform and robust interfacial structure, featuring an interconnected mesoporous Al2O3 network and strong metal-support (Al-sol-derived framework) interfacial interactions that effectively regulated charge transfer around the metal sites. In contrast, when Si-sol was employed as the binder, although a rigid mesoporous network framework was formed, the lack of strong interactions between the coating layer, the cordierite surface and the NCM active particles resulted in the formation of numerous coating cracks after calcination, which was unfavorable for heat transfer and adhesion stability. Compared with inorganic binders, the organic binder was gradually oxidized and removed during high-temperature calcination, unable to form a permanent supporting framework. Consequently, the temporary coating connection failed to withstand accumulated thermal stress, eventually evolving into a poorly adhered structure with severe particle agglomeration, abundant cracks, and inadequate anti-peeling resistance. By correlating the coating characteristics of the monolithic catalysts with their catalytic performance, it was revealed that coating adhesion strength, mesoporous confinement effects and strong SMSI-induced regulation of the local electronic environment of metal sites are the key factors determining DRM performance. Among the catalysts, the strongly adhered coating of m-NCM-Al-sol effectively prevented the active component loss owing to its excellent high-temperature anti-peeling capability, while its mesoporous confinement structure suppressed coke deposition. Meanwhile, the interfacial charge transfer between the metal species and the support framework promoted C−H bond activation on Ni sites, thereby resulting in the best catalytic activity and stability. In contrast, the catalyst modified using the organic binder HEC exhibited the poorest coating uniformity, adhesion strength, and coking confinement properties, leading to significantly inferior catalytic performance compared with catalysts prepared using inorganic binders. After further optimization of the coating process parameters, the monolithic m-NCM-Al-sol catalyst exhibited excellent and stable DRM performance, achieving CH4 and CO2 conversions of 73% and 83.6%, respectively, during continuous operation for 30 h.
References
Less
1
TOLLEFSON J. World’s carbon emissions set to spike by 2% in 2017[J]. Nature, 2017, 551(7680): 283.
2
NOOR Z Z, YUSUF R O, ABBA A H, et al. An overview for energy recovery from municipal solid wastes (MSW) in Malaysia scenario[J]. Renewable Sustainable Energy Rev, 2013, 20: 378−384.
3
WUEBBLES D. Atmospheric methane and global change[J]. Earth-Sci Rev, 2002, 57: 177−210.
4
ABDULRASHEED A, JALIL A A, GAMBO Y, et al. A review on catalyst development for dry reforming of methane to syngas: Recent advances[J]. Renewable Sustainable Energy Rev, 2019, 108: 175−193.
5
OGBO A, LAURETTA N E, UKPERE W. Risk management and challenges of climate change in Nigeria[J]. J Hum Ecol, 2013, 41(3): 221−235.
6
COTOVICZ L C, KNOPPERS B A, BRANDINI N, et al. Spatio-temporal variability of methane (CH4) concentrations and diffusive fluxes from a tropical coastal embayment surrounded by a large urban area (Guanabara Bay, Rio de Janeiro, Brazil)[J]. Limnol Oceanogr, 2016, 61: 238−252.
7
OWGI A H K, JALIL A A, HUSSAIN I, et al. Catalytic systems for enhanced carbon dioxide reforming of methane: a review[J]. Environ Chem Lett, 2021, 19(3): 2157−2183.
8
HERMINIO T, CESARIO M R, SILVA V D, et al. CO2 reforming of methane to produce syngas using anti-sintering carbon-resistant Ni/CeO2 fibers produced by solution blow spinning[J]. Environ Chem Lett, 2020, 18(3): 895−903.
9
WANG Y, YAO L, WANG S, et al. Low-temperature catalytic CO2 dry reforming of methane on Ni-based catalysts: A review[J]. Fuel Process Technol, 2018, 169: 199−206.
10
MOSAAD AWAD M, KOTOB E, AHMED TAIALLA O, et al. Recent developments and current trends on catalytic dry reforming of methane: Hydrogen production, thermodynamics analysis, techno feasibility, and machine learning[J]. Energy Convers Manage, 2024, 304: 118252.
11
QIN Z, CHEN J, XIE X, et al. CO2 reforming of CH4 to syngas over nickel-based catalysts[J]. Environ Chem Lett, 2020, 18(4): 997−1017.
12
KATHIRASER Y, OEMAR U, SAW E T, et al. Kinetic and mechanistic aspects for CO2 reforming of methane over Ni based catalysts[J]. Chem Eng J, 2015, 278: 62−78.
13
ARGYLE M, BARTHOLOMEW C. Heterogeneous catalyst deactivation and regeneration: A review[J]. Catalysts, 2015, 5(1): 145−269.
14
HU S, LI W-X. Sabatier principle of metal-support interaction for design of ultrastable metal nanocatalysts[J]. Science, 2021, 374(6573): 1360−1365.
15
CHATLA A, ABU-RUB F, PRAKASH A V, et al. Highly stable and coke-resistant Zn-modified Ni-Mg-Al hydrotalcite derived catalyst for dry reforming of methane: Synergistic effect of Ni and Zn[J]. Fuel, 2022, 308: 122042.
16
KIM D H, SEO J-C, KIM Y J, et al. Ni-Co alloy catalyst derived from NixCoy/MgAl2O4 via exsolution method for high coke resistance toward dry reforming of methane[J]. Catal Today, 2024, 425: 114337.
17
CAO Z, LIN S, LI G, et al. Revolutionizing CH4-CO2 reforming: Resilient La2O3-Ni@MgAl2O4 catalyst with dual-function synergy[J]. Surf Interfaces, 2024, 46: 104050.
18
YURANOV I, KIWI-MINSKER L, RENKEN A. Structured combustion catalysts based on sintered metal fibre filters[J]. Appl Catal B: Environ, 2003, 43(3): 217−227.
19
ROY S, K. HEIBEL A, LIU W, et al. Design of monolithic catalysts for multiphase reactions[J]. Chem Eng Sci, 2004, 59(5): 957−966.
20
AGUENIOU F, VIDAL H, YESTE M P, et al. Honeycomb monolithic design to enhance the performance of Ni-based catalysts for dry reforming of methane[J]. Catal Today, 2022, 383: 226−235.
21
WU H, WANG C Z, QIU Y, et al. Effect of steric confinement dimension on metal site anti-carbon deposition ability of Ni-SiO2 catalysts in CH4-CO2 reforming[J]. Chem J Chin Univ, 2020, 41(11): 2488.
22
LIU Y P, LIU L J, WEI X S, et al. Catalytic oxidative dehydrogenation of isobutane with CO2 to isobutene over ZnCaZr solid solution[J]. J Fuel Chem Technol, 2024, 52(8): 1103−1114.
23
WANG C Z, LIU L J, LIU Y P, et al. CO2 reforming of ethane using Ni-La intermetallic sites within a nanocapsule framework[J]. Chem Eng J, 2024, 491: 152091.
24
ZHANG W, LIU X, ZHENG H, et al. Low Ru doping induced interface and defects engineering in 2D square micro-mesoporous CoNiRuOx nanosieves for advanced oxygen evolution electrocatalysis[J]. J Colloid Interf Sci, 2025, 679: 1021−1028.
25
WAN K, LUO J, LIU W, et al. Metal-organic framework-derived cation regulation of metal sulfides for enhanced oxygen evolution activity[J]. Chin J Catal, 2023, 54: 290−297.
26
PARK D-H, KIM M-H, KIM M, et al. Spherical nickel doped cobalt phosphide as an anode catalyst for oxygen evolution reaction in alkaline media: From catalysis to system[J]. Appl Catal B: Environ, 2023, 327: 122444.
27
KHALIGHI R, BAHADORAN F, PANJESHAHI M H, et al. High catalytic activity and stability of X/CoAl2O4 (X = Ni, Co, Rh, Ru) catalysts with no observable coke formation applied in the autothermal dry reforming of methane lined on cordierite monolith reactors[J]. Microporous Mesoporous Mater, 2020, 305.
28
ZOU Z, ZHANG T, et al. Preparation adjacent Ni-Co bimetallic nano catalyst for dry reforming of methane[J]. Fuel, 2023, 343: 128013.
29
CHAUDHARY P K, DEO G. Influence of particle size and metal-support interaction on the catalytic performance of Ni-Al2O3 catalysts for the dry and oxidative-dry reforming of methane[J]. Colloid Surface A, 2022, 646: 128973.
30
CHAVA R, PURBIA D, ROY B, et al. Effect of calcination time on the catalytic activity of Ni/γ-Al2O3 cordierite monolith for dry reforming of biogas[J]. Int J Hydrogen Energ, 2021, 46(9): 6341−6357.
31
THIRUMALARASU B A, RAJAGOPALAN A, MURUGAN S, et al. Direct conversion of biogas to syngas over bimetallic nickel–cobalt supported on α-alumina catalysts[J]. Renewable Energy, 2024, 234: 121200.
32
XU Z, PARK E D. Recent advances in coke management for dry reforming of methane over Ni-based catalysts[J]. Catalysts, 2024, 14(3): 176.
33
ALHASSAN M, JALIL A A, OMOREGIE A I, et al. Silica-based materials in methane conversion: A two-decade bibliometric and literature review (1995–2022)[J]. Top Catal, 2025, 68: 433−465.
34
VALINTON J A A, LIN M-Y, TSAI C-H, et al. A robust inorganic binder against corrosion and peel-off stress in electrocatalysis[J]. Chem Sci, 2024, 15(41): 16966−16976.
35
SONG G-L, FENG Z. Modification, degradation and evaluation of a few organic coatings for some marine applications[J]. Corros Mater Degrad, 2020, 1(3): 408−442.
36
REN Y, XU H, ZHANG L. Effects of slurry composition and interfacial adhesion of monolithic coatings on FeCrAl honeycombs[J]. Coatings, 2024, 14(11): 1372.
37
CEBOLLADA P A R, GARCIA-BORDEJÉ E. Optimisation of physical properties of γ-alumina coating microreactors used for the growth of a carbon nanofiber layer[J]. Chem Eng J, 2009, 149: 447−454.
Appendix
Less
Year 2026 volume 54 Issue 7
PDF
142
55
Cite this Article
BibTeX
Article Info
doi: 10.1016/S1872-5813(26)60762-1
  • Receive Date：2026-04-16
  • Online Date：2026-09-23
  • Published：2026-07-10
Article Data
Affiliations
History
  • Received：2026-04-16
  • Revised：2026-05-09
  • Accepted：2026-05-15
Affiliations
    1Engineering Research Center of Ministry of Education for Fine Chemicals, Shanxi University, Taiyuan 030006, China
    2State Key Laboratory of Coal Conversion, Institute of Coal Chemistry, Chinese Academy of Sciences, Taiyuan 030001, China
    3Shanxi Xingxin Safety Production Technology Service Co., Ltd, Taiyuan 030008, China

Corresponding:

References
Share
https://castjournals.cast.org.cn/joweb/rlhxxb/EN/10.1016/S1872-5813(26)60762-1
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family		 属数
Number of
genus		 种数
Number of
species		 占总种数比例
Percentage of
total species (%)		 属
Genus		 种数
Number of
species		 占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT
Links
Articles
Latest Articles
Most Read
Collections
Updates
Events
News
Multimedia
About
About Us
Contact
No. 86 Xueyuan South Road, Haidian District, Beijing
100081
010-62662699(Operation and Technical Support)
qkjq@cast.org.cn

Copyright © 2025 China Association for Science and Technology. All rights reserved. For all open access content, the relevant licensing terms apply.
Sponsored by the Office of the Leading Group for Cybersecurity and Informatization of CAST, and supported by Science and Technology Review Publishing House