Highly stretchable and transparent ionic conducting materials have enabled new concepts of electronic devices denoted as iontronics, with a distinguishable working mechanism and performances from the conventional electronics. However, the existing ionic conducting materials can hardly bear the humidity and temperature change of our daily life, which has greatly hindered the development and real-world application of iontronics. Herein, we design an ion gel possessing unique traits of hydrophobicity, humidity insensitivity, wide working temperature range (exceeding 100°C, and the range covered our daily life temperature), high conductivity (10^-3~10^-5 S/cm), extensive stretchability, and high transparency, which is among the best-performing ionic conductors ever developed for flexible iontronics. Several ion gel-based iontronics have been demonstrated, including large-deformation sensors, electroluminescent devices, and ionic cables, which can serve for a long time under harsh conditions. The designed material opens new potential for the real-world application progress of iontronics.

Solar-driven desalination has been considered as a promising technology for producing clean water through an abundant and pollution-free energy source. It is a critical challenge to reasonably design the porous morphology and the thermal management of photothermal membranes for enabling efficient energy conversion and water production. In this work, a Janus poly(vinylidene fluoride) membrane was fabricated in combination of penetrative pore structure, asymmetric surface wettability with proper thermal management for high-efficiency solar desalination. Highly open and directly penetrative pores achieved by the two-dimensional solvent freezing strategy are considered to provide direct pathways for water and vapor transportation. The unique feature of hydrophobic upper layer/hydrophilic lower layer enables the photothermal membranes to self-float on the water surface and rapidly pump water from the bulk to the surface. The resulting Janus membrane exhibits a satisfactory light absorbance as high as 97% and a photothermal conversion efficiency of 62.8% under one-sun irradiation in a direct contact mode. The solar-to-vapor efficiency rises up to 90.2% with the assistance of a thermal insulator adopted beneath. Both the Janus membrane and the composite setup are able to work efficiently with a high stability in seawater desalination, and the concentration of ion in condensed water is reduced to below 1 ppm. Therefore, Janus membranes with directly penetrative pores and photothermal surfaces shine a light on the development of high-performance solar evaporators for the practical application in solar seawater desalination.

Alloying bismuth telluride with antimony telluride and bismuth selenide for p- and n-type materials, respectively, improves the thermoelectric quality factor for use in room temperature modules. As the electronic and thermal transports can vary substantially, the alloy composition is a key engineering parameter. The n-type Bi₂Te_3-{}_xSe{}_x alloy lags its p-type counterpart in thermoelectric performance and does not lend itself as readily to simple transport modeling which complicates engineering. Combining literature data with recent results across the entire alloy composition range, the complex electronic structure dynamics and trends in lattice thermal conductivity are explored. Spin-orbit interaction plays a critical role in determining the position and degeneracy of the various conduction band minima. This behavior is incorporated into a two-band effective mass model to estimate the transport parameters in each band. An alloy scattering model is utilized to demonstrate how phonon scattering behaves differently on either side of the intermediate ordered compound Bi₂Te₂Se due to chalcogen site occupancy preference. The parametrization of the electronic and thermal transports presented can be used in future optimization efforts.

Lubrication is the key to efficient function of human tissues and has significant impact on the comfort level. However, the construction of a lubricating nanofibrous membrane has not been reported as yet, especially using a one-step surface modification method. Here, bioinspired by the superlubrication mechanism of articular cartilage, we successfully construct hydration-enhanced lubricating nanofibers via one-step in situ grafting of a copolymer synthesized by dopamine methacrylamide (DMA) and 2-methacryloyloxyethyl phosphorylcholine (MPC) onto electrospun polycaprolactone (PCL) nanofibers. The zwitterionic MPC structure provides the nanofiber surface with hydration lubrication behavior. The coefficient of friction (COF) of the lubricating nanofibrous membrane decreases significantly and is approximately 65% less than that of pure PCL nanofibers, which are easily worn out under friction regardless of hydration. The lubricating nanofibers, however, show favorable wear-resistance performance. Besides, they possess a strong antiadhesion ability of fibroblasts compared with pure PCL nanofibers. The cell density decreases approximately 9-fold, and the cell area decreases approximately 12 times on day 7. Furthermore, the in vivo antitendon adhesion data reveals that the lubricating nanofiber group has a significantly lower adhesion score and a better antitissue adhesion. Altogether, our developed hydration-enhanced lubricating nanofibers show promising applications in the biomedical field such as antiadhesive membranes.

Glutathione S-transferases (GSTs), detoxification enzymes that catalyze the addition of glutathione (GSH) to diverse electrophilic molecules, are often overexpressed in various tumor cells. While fluorescent probes for GSTs have often adopted the 2,4-dinitrobenzenesulfonyl (DNs) group as the receptor unit, they usually suffer from considerable background reaction noise with GSH due to excessive electron deficiency. However, weakening this reactivity is generally accompanied by loss of sensitivity for GSTs, and therefore, finely turning down the reactivity while maintaining certain sensitivity is critical for developing a practical probe. Here, we report a rational semiquantitative strategy for designing such a practical two-photon probe by introducing a parameter adopted from the conceptual density functional theory (CDFT), the local electrophilicity {\omega }_k, to characterize this reactivity. As expected, kinetic studies established {\omega }_k as efficient to predict the reactivity with GSH, and probe NI3 showing the best performance was successfully applied to detecting GST activities in live cells and tissue sections with high sensitivity and signal-to-noise ratio. Photoinduced electron transfer of naphthalimide-based probes, captured by femtosecond transient absorption for the first time and unraveled by theoretical calculations, also contributes to the negligible background noise.

The human body is made up of physical structures and spaces. These physiological spaces play an integral role in metabolic processes. In previous scientific research, these spaces were often neglected. The study of the importance of their existence in the body can help scientifically understand some of the thorniest medical problems that we currently face. It may also help in the diagnosis and prevention of disease, especially of drug-induced origins. The proper reading of the essence of meridians through the perspective of these spaces can help to improve scientific understanding of the principles of acupuncture and moxibustion and the treatment principles of Chinese and Western medicine and ultimately promote the communication and integration of Chinese and Western medicine.

Wearable and implantable electronics (WIEs) are more and more important and attractive to the public, and they have had positive influences on all aspects of our lives. As a bridge between wearable electronics and their surrounding environment and users, sensors are core components of WIEs and determine the implementation of their many functions. Although the existing sensor technology has evolved to a very advanced level with the rapid progress of advanced materials and nanotechnology, most of them still need external power supply, like batteries, which could cause problems that are difficult to track, recycle, and miniaturize, as well as possible environmental pollution and health hazards. In the past decades, based upon piezoelectric, pyroelectric, and triboelectric effect, various kinds of nanogenerators (NGs) were proposed which are capable of responding to a variety of mechanical movements, such as breeze, body drive, muscle stretch, sound/ultrasound, noise, mechanical vibration, and blood flow, and they had been widely used as self-powered sensors and micro-nanoenergy and blue energy harvesters. This review focuses on the applications of self-powered generators as implantable and wearable sensors in health monitoring, biosensor, human-computer interaction, and other fields. The existing problems and future prospects are also discussed.

Biological synthetic methods of nanoparticles have shown great advantages, such as environmental friendliness, low cost, mild reaction conditions, and enhanced biocompatibility and stability of products. Bacteria, as one of the most important living organisms, have been utilized as bioreducing nanofactories to biosynthesize many metal nanoparticles or compounds. Here, inspired by the disinfection process of KMnO₄, we for the first time introduce bacteria as both the template and the reducing agent to construct a novel tumor microenvironment-responsive MnO{}_x-based nanoplatform for biomedical applications in various aspects. It is found that the bacterium/MnO{}_x-based nanospindles (EM NSs) can efficiently encapsulate the chemotherapeutic agent doxorubicin (DOX), leading to the fluorescence quenching of the drug. The as-formed DOX-loaded EM NSs (EMD NSs) are proven to be decomposed by glutathione (GSH) and can simultaneously release DOX and Mn²⁺ ions. The former can be utilized for sensitive fluorescence-based GSH sensing with a limit of detection as low as 0.28  μM and selective cancer therapy, while the latter plays important roles in GSH-activated magnetic resonance imaging and chemodynamic therapy. We also demonstrate that these nanospindles can generate oxygen in the presence of endogenous hydrogen peroxide to inhibit P-glycoprotein expression under hypoxia and can achieve excellent tumor eradication and tumor metastasis inhibition performance. Taken together, this work designs a multifunctional bacterially synthesized nanomissile for imaging-guided tumor-specific chemo-chemodynamic combination therapy and will have implications for the design of microorganism-derived smart nanomedicines.