Metal-enhanced photocatalysis has recently received increasing interest, mainly due to the ability of metal to directly or indirectly degrade pollutants. In this review, we briefly review the recent breakthroughs in metal-enhanced photocatalysis. We discussed the recent progress of surface plasmon resonance (SPR) effect and small size effect of metal nanoparticles on photocatalysis; in particular, we focus on elucidating the mechanism of energy transfer and hot electron injection/transfer effect of metal nanoparticles and clusters while as photocatalysts or as cophotocatalysts. Finally, we discuss the potential applications of metal-enhanced photocatalysis, and we also offer some perspectives for further investigations.

Organic-inorganic hybrid perovskites (OIHPs) have been intensively studied due to their fascinating optoelectronic performance. Electron microscopy and related characterization techniques are powerful to figure out their structure-property relationships at the nanoscale. However, electron beam irradiation usually causes damage to these beam-sensitive materials and thus deteriorates the associated devices. Taking a widely used CH₃NH₃PbI₃ film as an example, here, we carry out a comprehensive study on how electron beam irradiation affects its properties. Interestingly, our results reveal that photoluminescence (PL) intensity of the film can be significantly improved along with blue-shift of emission peak at a specific electron beam dose interval. This improvement stems from the reduction of trap density at the CH₃NH₃PbI₃ surface. The knock-on effect helps expose a fresh surface assisted by the surface defect-induced lowering of displacement threshold energy. Meanwhile, the radiolysis process consistently degrades the crystal structure and weaken the PL emission with the increase of electron beam dose. Consequently, the final PL emission comes from a balance between knock-on and radiolysis effects. Taking advantage of the defect regulation, we successfully demonstrate a patterned CH₃NH₃PbI₃ film with controllable PL emission and a photodetector with enhanced photocurrent. This work will trigger the application of electron beam irradiation as a powerful tool for perovskite materials processing in micro-LEDs and other optoelectronic applications.

Stem cell therapy holds high promises in regenerative medicine. The major challenge of clinical translation is to precisely and quantitatively evaluate the in vivo cell distribution, migration, and engraftment, which cannot be easily achieved by current techniques. To address this issue, for the first time, we have developed a molecular cell tracker with a strong fluorescence signal in the second near-infrared (NIR-II) window (1,000-1,700 nm) for real-time monitoring of in vivo cell behaviors in both healthy and diseased animal models. The NIR-II tracker (CelTrac1000) has shown complete cell labeling with low cytotoxicity and profound long-term tracking ability for 30 days in high spatiotemporal resolution for semiquantification of the biodistribution of transplanted stem cells. Taking advantage of the unique merits of CelTrac1000, the responses of transplanted stem cells to different diseased environments have been discriminated and unveiled. Furthermore, we also demonstrate CelTrac1000 as a universal and effective technique for ultrafast real-time tracking of the cellular migration and distribution in a 100  μm single-cell cluster spatial resolution, along with the lung contraction and heart beating. As such, this NIR-II tracker will shift the optical cell tracking into a single-cell cluster and millisecond temporal resolution for better evaluating and understanding stem cell therapy, affording optimal doses and efficacy.

Australia is a warm country with well-developed agriculture and a highly urbanized population. How these specific features impact the nitrogen cycle, emissions, and consequently affect environmental and human health is not well understood. Here, we find that the ratio of reactive nitrogen (N_r) losses to air over losses to water in Australia is 1.6 as compared to values less than 1.1 in the USA, the European Union, and China. Australian N_r emissions to air increased by more than 70% between 1961 and 2013, from 1.2 Tg N yr^-1 to 2.1 Tg N yr^-1. Previous emissions were substantially underestimated mainly due to neglecting the warming climate. The estimated health cost from atmospheric N_r emissions in Australia is 4.6 billion US dollars per year. Emissions of N_r to the environment are closely correlated with economic growth, and reduction of N_r losses to air is a priority for sustainable development in Australia.

Large-size organic halide passivation has been considered an efficient approach to enhance the perovskite solar cell (PSC) efficiency and stability. Herein, a facile posttreatment strategy was demonstrated, wherein trifluoromethyl-phenethylamine hydrobromide (CF₃-PEABr) is firstly used to passivate the perovskite film surface. The CF₃-PEABr surface posttreatment could coordinate with halide dangling bonds that exist at the perovskite crystal surface. Moreover, the surface treatment with CF₃-PEABr could efficiently passivate the defects in the perovskite film and suppress the nonradiative carrier recombination. As a result, a high efficiency of 21.3% is obtained, and an increment of 80 mV in V_{\text{oc}} (a large V_{\text{oc}} of 1.15 V, with a 0.42 V voltage deficit) occurs, compared to the control device. To relieve the hydrophobic nature properties of the -CF₃ functional group and the dewetting problem of PCBM layer deposition, a surfactant Triton X-100 is used to modify the PCBM layer. Furthermore, the devices with CF₃-PEABr posttreatment exhibit better operational, thermal (85°C), and long storage stabilities without any encapsulation.

Wound healing is a complex physiological process that involves coordinated phases such as inflammation and neovascularization. Attempts to promote the healing process tend to construct an effective delivery system based on different drugs and materials. In this paper, we propose novel MXene-integrated microneedle patches with adenosine encapsulation for wound healing. Owing to the dynamic covalent bonding capacity of boronate molecules with adenosine, 3-(acrylamido)phenylboronic acid- (PBA-) integrated polyethylene glycol diacrylate (PEGDA) hydrogel is utilized as the host material of microneedle patches. Benefitting from photothermal conversion capacity of MXene, the release of loaded adenosine could be accelerated under NIR irradiation for maintaining the activation signal around injury site. In vitro cell experiments proved the effect of MXene-integrated microneedle patches with adenosine encapsulation in enhancing angiogenesis. When applied for treating animal models, it is demonstrated that the microneedle patches efficiently promote angiogenesis, which is conductive to wound healing. These features make the proposed microneedle patch potential for finding applications in wound healing and other biomedical fields.

Real-time wireless respiratory monitoring and biomarker analysis provide an attractive vision for noninvasive telemedicine such as the timely prevention of respiratory arrest or for early diagnoses of chronic diseases. Lightweight, wearable respiratory sensors are in high demand as they meet the requirement of portability in digital healthcare management. Meanwhile, high-performance sensing material plays a crucial role for the precise sensing of specific markers in exhaled air, which represents a complex and rather humid environment. Here, we present a liquid metal-based flexible electrode coupled with SnS₂ nanomaterials as a wearable gas-sensing device, with added Bluetooth capabilities for remote respiratory monitoring and diagnoses. The flexible epidermal device exhibits superior skin compatibility and high responsiveness (1092%/ppm), ultralow detection limits (1.32 ppb), and a good selectivity of NO gas at ppb-level concentrations. Taking advantage of the fast recovery kinetics of SnS₂ responding to H₂O molecules, it is possible to accurately distinguish between different respiratory patterns based on the amount of water vapor in the exhaled air. Furthermore, based on the different redox types of H₂O and NO molecules, the electric signal is reversed once the exhaled NO concentration exceeds a certain threshold that may indicate the onset of conditions like asthma, thus providing an early warning system for potential lung diseases. Finally, by integrating the wearable device into a wireless cloud-based multichannel interface, we provide a proof-of-concept that our device could be used for the simultaneous remote monitoring of several patients with respiratory diseases, a crucial field in future digital healthcare management.

Metal-organic frameworks (MOFs) have attracted significant attention in the past two decades due to their diverse physical properties and associated functionalities. Although numerous advances have been made, the acoustic properties of MOFs have attracted very little attention. Here, we systematically investigate the acoustic velocities and impedances of 19 prototypical MOFs via first-principle calculations. Our results demonstrate that these MOFs exhibit a wider range of acoustic velocities, higher anisotropy, and lower acoustic impedances than their inorganic counterparts, which are ascribed to their structural diversity and anisotropy, as well as low densities. In addition, the piezoelectric properties, which are intimately related to the acoustic properties, were calculated for 3 MOFs via density functional perturbation theory, which reveals that MOFs can exhibit significant piezoelectricity due to the ionic contribution. Our work provides a comprehensive study of the fundamental acoustic properties of MOFs, which could stimulate further interest in this new exciting field.

Reliable, wide range, and highly sensitive joint movement monitoring is essential for training activities, human behavior analysis, and human-machine interfaces. Yet, most current motion sensors work on the nano/microcracks induced by the tensile deformation on the convex surface of joints during joint movements, which cannot satisfy requirements of ultrawide detectable angle range, high angle sensitivity, conformability, and consistence under cyclic movements. In nature, scorpions sense small vibrations by allowing for compression strain conversion from external mechanical vibrations through crack-shaped slit sensilla. Here, we demonstrated that ultraconformal sensors based on controlled slit structures, inspired by the geometry of a scorpion’s slit sensilla, exhibit high sensitivity (0.45%deg^-1), ultralow angle detection threshold (~15°), fast response/relaxation times (115/72 ms), wide range (15° ~120°), and durability (over 1000 cycles). Also, a user-friendly, hybrid sign language system has been developed to realize Chinese and American sign language recognition and feedback through video and speech broadcasts, making these conformal motion sensors promising candidates for joint movement monitoring in wearable electronics and robotics technology.

Aggregation-induced emission (AIE) has been much employed for visualizing material aggregation and self-assembly. However, water is generally required for the preparation of the AIE aggregates, the operation of which limits numerous material processing behaviors. Employing hexathiobenzene-based small molecules, monopolymers, and block copolymers as different material prototypes, we herein achieve AIE in pure organic phases by applying a nonequilibrium strategy, photoexcitation-controlled aggregation. This strategy enabled a dynamic change of molecular conformation rather than chemical structure upon irradiation, leading to a continuous aggregation-dependent luminescent enhancement (up to ~200-fold increase of the luminescent quantum yield) in organic solvents. Accompanied by the materialization of the nonequilibrium strategy, photoconvertible self-assemblies with a steady-state characteristic can be achieved upon organic solvent processing. The visual monitoring with the luminescence change covered the whole solution-to-film transition, as well as the in situ photoprocessing of the solid-state materials.