PbS is a latent substitute of PbTe thermoelectric materials, which is on account of its superiority in low cost and earth abundance. Here, the thermoelectric transport properties of p-type PbS by doping alkali metals (Na and Li) are investigated and it is verified that Li is a more effective dopant than Na. By introducing Li, the electrical and thermal transport properties were optimized collectively. The electrical transport properties were boosted remarkably via adjusting carrier concentration, and the maximum power factor (PF_max) of ~11.5  μW/cmK² and average power factor (PF_ave) ~9.9  μW/cmK² between 423 and 730 K in Pb_0.99Li_0.01S were achieved, which are much higher than those (~9.5 and ~7.7  μW/cmK²) of Pb_0.99Na_0.01S. Doping Li and Na can weaken the lattice thermal conductivity effectively. Combining the enlarged PF with suppressed total thermal conductivity, a maximum ZT ~0.5 at 730 K and a large average ZT ~0.4 at 423-730 K were obtained in p-type Pb_0.99Li_0.01S, which are higher than ~0.4 and ~0.3 in p-type Pb_0.99Na_0.01S, respectively.

With the advent of diverse electronics, the available energy may be light, thermal, and mechanical energies. Multieffect coupled nanogenerators (NGs) exhibit strong ability to harvest ambient energy by integrating various effects comprising piezoelectricity, pyroelectricity, thermoelectricity, optoelectricity, and triboelectricity into a standalone device. Interaction of multitype effects can promote energy harvesting and conversion by modulating charge carriers’ behaviour. Multieffect coupled NGs stand for a vital group of energy harvesters, supporting the advances of an electronic device and promoting the resolution of energy crisis. The matchless versatility and high reliability of multieffect coupled NGs make them main candidates for integration in complicated arrays of the electronic device. Multieffect coupled NGs can also be employed as a variety of self-powered sensors due to their rapid response, high accuracy, and high responsivity. This article reviews the latest achievements of multieffect coupled NGs. Fundamentals mainly including basic theory and materials of interest are covered. Advanced device design and output characteristics are introduced. Potential applications are described, and future development is discussed.

Microneedles represent a cutting-edge and idea-inspiring technology in biomedical engineering, which have attracted increasing attention of scientific researchers and medical staffs. Over the past decades, numerous great achievements have been made. The fabrication process of microneedles has been simplified and becomes more precise, easy-to-operate, and reusable. Besides, microneedles with various features have been developed and the microneedle materials have greatly expanded. In recent years, efforts have been focused on generating smart microneedles by endowing them with intriguing functions such as adhesion ability, responsiveness, and controllable drug release. Such improvements enable the microneedles to take an important step in practical applications including household drug delivery devices, wearable biosensors, biomedical assays, cell culture, and microfluidic chip analysis. In this review, the fabrication strategies, distinctive properties, and typical applications of the smart microneedles are discussed. Recent accomplishments, remaining challenges, and future prospects are also presented.

Metal halide perovskite light-emitting diodes (LEDs) have achieved great progress in recent years. However, bright and spectrally stable blue perovskite LED remains a significant challenge. Three-dimensional mixed-halide perovskites have potential to achieve high brightness electroluminescence, but their emission spectra are unstable as a result of halide phase separation. Here, we reveal that there is already heterogeneous distribution of halides in the as-deposited perovskite films, which can trace back to the nonuniform mixture of halides in the precursors. By simply introducing cationic surfactants to improve the homogeneity of the halides in the precursor solution, we can overcome the phase segregation issue and obtain spectrally stable single-phase blue-emitting perovskites. We demonstrate efficient blue perovskite LEDs with high brightness, e.g., luminous efficacy of 4.7, 2.9, and 0.4 lm W^-1 and luminance of over 37,000, 9,300, and 1,300 cd m^-2 for sky blue, blue, and deep blue with Commission Internationale de l’Eclairage (CIE) coordinates of (0.068, 0.268), (0.091, 0.165), and (0.129, 0.061), respectively, suggesting real promise of perovskites for LED applications.

The facile synthesis of highly active and stable bifunctional electrocatalysts to catalyze water splitting is attractive but challenging. Herein, we report the electrodeposition of Pt-decorated Ni(OH)₂/CeO₂ (PNC) hybrid as an efficient and robust bifunctional electrocatalyst. The graphite-supported PNC catalyst delivers superior hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) activities over the benchmark Pt/C and RuO₂, respectively. For overall water electrolysis, the PNC hybrid only requires a cell voltage of 1.45 V at 10 mA cm⁻² and sustains over 85 h at 1000 mA cm⁻². The remarkable HER/OER performances are attributed to the superhydrophilicity and multiple effects of PNC, in which Ni(OH)₂ and CeO₂ accelerate HER on Pt due to promoted water dissociation and strong electronic interaction, while the electron-pulling Ce cations facilitate the generation of high-valence Ni OER-active species. These results suggest the promising application of PNC for H₂ production from water electrolysis.