Home Journals Articles Updates About
CN
image
收藏切换
Deep-Learning-Assisted Underwater 3D Tactile Tensegrity
收藏切换
PDF
Peng Xu1, Jiaxi Zheng1, Jianhua Liu1, Xiangyu Liu1, Xinyu Wang1, Siyuan Wang1, Tangzhen Guan1, Xianping Fu2, Minyi Xu1, *, Guangming Xie3, *, Zhong Lin Wang4, 5, *
Research. Vol 6 Article ID 0062
Less
收藏切换
Research. Vol 6 Article ID 0062
• Research Article •
Deep-Learning-Assisted Underwater 3D Tactile Tensegrity
Full
Peng Xu1, Jiaxi Zheng1, Jianhua Liu1, Xiangyu Liu1, Xinyu Wang1, Siyuan Wang1, Tangzhen Guan1, Xianping Fu2, Minyi Xu1, *, Guangming Xie3, *, Zhong Lin Wang4, 5, *
Affiliations
  • 1Dalian Key Laboratory of Marine Micro/Nano Energy and Self-powered Systems, Marine Engineering College, Dalian Maritime University, Dalian 116026, China.
  • 2School of Information Science and Technology, Dalian Maritime University, Dalian 116026, China.
  • 3Intelligent Biomimetic Design Lab, College of Engineering, Peking University, Beijing 100871, China.
  • 4Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences, Beijing 100871, China.
  • 5School of Materials Science and Engineering, Georgia Institute of Technology, Atlanta, GA 30332-0245, USA.
About Author:

† These authors contributed equally to this work.

Published: 2023-02-20 doi: 10.34133/research.0062
Outline
收藏切换

The growth of underwater robotic applications in ocean exploration and research has created an urgent need for effective tactile sensing. Here, we propose an underwater 3-dimensional tactile tensegrity (U3DTT) based on soft self-powered triboelectric nanogenerators and deep-learning-assisted data analytics. This device can measure and distinguish the magnitude, location, and orientation of perturbations in real time from both flow field and interaction with obstacles and provide collision protection for underwater vehicles operation. It is enabled by the structure that mimics terrestrial animals’ musculoskeletal systems composed of both stiff bones and stretchable muscles. Moreover, when successfully integrated with underwater vehicles, the U3DTT shows advantages of multiple degrees of freedom in its shape modes, an ultrahigh sensitivity, and fast response times with a low cost and conformability. The real-time 3-dimensional pose of the U3DTT has been predicted with an average root-mean-square error of 0.76 in a water pool, indicating that this developed U3DTT is a promising technology in vehicles with tactile feedback.

Peng Xu, Jiaxi Zheng, Jianhua Liu, Xiangyu Liu, Xinyu Wang, Siyuan Wang, Tangzhen Guan, Xianping Fu, Minyi Xu, Guangming Xie, Zhong Lin Wang. Deep-Learning-Assisted Underwater 3D Tactile Tensegrity[J]. Research, 2023 , 6 (2) : 0062 - . DOI: 10.34133/research.0062
Full Text
Less
Introduction
Less
As ocean exploration technology has advanced, autonomous underwater vehicles (AUVs) have become indispensable. A major mission of AUVs is to explore an unknown underwater environment with obstacles or places that are hard to visually observe [1–4]. Diverse sensor architectures have been proposed to aid AUVs in autonomously completing their missions, with collision/obstacle avoidance in a variety of environments [5,6]. Namely, with the aid of device data, AUVs possess the ability to foresee, recognize, and handle unexpected changes and then adjust if these competences do not satisfy a certain level [7–9]. However, when optical or sonic reflection problems occur in a narrow space, it remains challenging for AUVs to identify unknown underwater environments.
Tensegrity structures are typically volumetric mechanical structures composed of a set of separated rigid elements connected by a continuous network of tensional elements, mimicking terrestrial animals’ musculoskeletal systems composed of both stiff bones and stretchable muscles [10–13]. The Intelligent Robotics Group at the NASA Ames Research Center has been developing the SUPERball (Spherical Underactuated Planetary Exploration Robot) using tensegrity structures, which could provide a technological solution for planetary landing and exploration missions [14–16]. These light, low-cost robots make certain missions more practical, since their structural designs allow the system to passively adapt to external forces and redistribute loads effectively through a tension network [17,18]. On the basis of these characteristics, the tensegrity structure that can change its shape in response to an external force is capable of performing scientific measurements in narrow spaces. This capacity enables it to explore and recognize unknown underwater environments via its posture estimation without being dependent of the underwater optical or sonic devices. In addition, the structure can also provide high impact resilience with a low weight, making it a potential candidate for collision-resilient AUVs. It was interestingly found that tensegrity can be viewed as excellent tactile perception scheme for underwater vehicles exploring an unknown underwater environment [19]. However, little attention has been paid to tactile sensors based on tensegrity structures for use in the underwater 3-dimensional (3D) tactile perception.
In general, by employing tactile sensing, including the sensing of forces, force directions, the contact location, and the contact surface, as feedback parameters in a closed-loop control system, robots can excellently perform most manipulation tasks or explore unknown environments [20–24]. On this basis, several research groups have developed a kind of tactile sensor combined with resistive (contact-resistance-based) [25], piezoresistive [26,27], magnetic [28,29], or capacitive sensor arrays [30], resulting in sensing improvements of the sensitivity, response time, and linearity. Specifically, Boutry et al. [31] designed a biomimetic soft electronic tactile sensor composed of capacitive sensor arrays. The sensor has several advantages, including an improved sensitivity, minimal hysteresis, excellent cycling stability, and response times in the millisecond range. On the basis of a structure of whisker follicles, Beem et al. [32,33] designed an underwater tactile sensor using a piezoelectric sensor array for underwater motion perception. These devices typically require complex fabrication techniques and have limited degrees of freedom (DOFs) in their shape modes, limiting their general application in robot–environment interaction, particularly in underwater environments. Thus, it is still challenging to construct a 3D tactile sensor with ultrasensitivity, high deformability, and high scalability.
To date, triboelectric nanogenerators (TENGs) have not been developed into tactile sensors based on tensegrity structures for making scientific measurements in narrow places. Noticeably, the outputs of TENG-based sensors in response to deformation are characterized by low hysteresis and high repeatability, which simplifies the design of signal processing circuits [34–37]. Some triboelectric devices have been designed for irregular and ultralow-frequency energy harvesting [38–42], rotational and linear motion sensing [43], nanometer-scale motion monitoring [44], and external stimulus detection [45–47]. On the basis of these results, a TENG-based underwater 3D tactile tensegrity (U3DTT) with multiple DOFs may provide a simple scheme for robot–environment interactions, relying on passive tactile perception.
In this work, a deep learning (DL)-enabled U3DTT based on a triboelectric mechanism was developed to construct an intelligent, self-powered, multi-DOF, and highly conformable 3D tactile perception system and provide collision resilience for underwater vehicles. The developed sensing system was built by integrating the voltage signals of triboelectric cap-shaped pressing (CP) sensors and rope-shaped stretchable (RS) sensors with advanced DL-based data analytics, as shown in Fig. 1. The CP-TENG sensor array was able to determine the location of the impact and the magnitude of the impact force. The RS-TENG sensor generated signals for measuring the tension network via contact separation between the electropositive carbon nanotubes (CNTs) and the electronegative silicone rubber. Moreover, assisted by integrated DL-based data analytics, 3D pose information of the U3DTT could be extracted from the output voltage of triboelectric sensors. Benefiting from the 1D signal of 2 types of sensors, huge computing resources can be saved compared to the conventional image and massive channel-based process, enabling faster data analytics for real-time applications in measuring both the surrounding flow field and interaction with obstacles.
Results
Less
Basic structure and working mechanism of the U3DTT
The goal of the U3DTT is to provide an artificial 3D tactile feedback for collision-resilient AUVs to guide their operation and ensure them survive collisions at high speed. The deformation of the tensegrity structure should be small, so that the working thruster cannot affect the triboelectric device’s signal output in response to impact forces. In addition, the tensegrity structure should also be lightweight to ensure that its additional mass has limited influence on the AUV operation.
The U3DTT consisted mainly of a CP-TENG sensor installed at the end of a rigid carbon fiber rod and an RS-TENG sensor as the tensional cable used to connect 2 rods. As shown in Fig. 1A, a checkerboard-shaped block with grooves made of Cu was employed as the positive triboelectric component in the CP-TENG sensor, while a silicon rubber cover with the spinous structure located on the grooves was employed as the negative triboelectric layer due to its excellent toughness, stretchability, and ability to gain electrons. Moreover, the CP-TENG sensor can convert the flexible cover deformation into electrical signals under an external pressing force. When the sensor removed an external pressing force, the cover recovered its original state under the push-back force from the soft materials. As illustrated schematically in Fig. 1B, the structure of the RS-TENG sensor was mainly composed of silicone rubber chosen as the negative triboelectric component and coated evenly on the coiled wire (Ag-plated carbon steel), and CNTs were chosen as the positive triboelectric layer. The main body of the RS-TENG was sealed with a latex tube and a clamp in the presence of an air layer between the latex tube and the CNTs, ensuring that triboelectric signals could be generated under a stretching force in an underwater environment. The detailed fabrication of the RS-TENG sensor and the CP-TENG sensor is provided in Methods.
Leveraging DL technology, the U3DTT integrated with an AUV was successfully demonstrated to estimate its pose and perceive poorly modeled natural environments and provide a high impact resilience for the AUVs, as shown in Fig. 1C and Fig. S1. The tensegrity structure was designed to mimic terrestrial animals’ musculoskeletal systems, and it was used to construct a prototype of a light 3D tactile sensor with multiple DOFs in response to an external load. The signal readout strategies (Fig. 1D and E) include a voltage ratio caused by variations of the CP-TENG sensor structures and voltage characteristics in different states of the RS-TENG sensor, such as twistable, bendable, and stretchable states.
Figure 1F illustrates an overview of the process flow of the hardware and software, starting with an analog signal sampling, followed by conditioning, processing, transmission to a robot operating system (ROS) embedded with the DL algorithm for robust pose estimation of the tensegrity, and, finally, thruster control. The signal-conditioning techniques for each sensor were utilized using an analog circuit, as shown in Fig. S2, whose major function was to amplify the sensing signal and eliminate background noise. This guaranteed that the analog output of the TENG sensor was capable of accurately expressing the tensegrity pose information and was suitable for further conversion to a digital format using an analog-to-digital converter. A microcontroller possessed the communication ability to calibrate the conditioned signals to an on-board transceiver and transmit them to the ROS via a serial bus. The ROS on the Jetson board was developed with a built-in DL algorithm (transformer model). The detailed process of the transformer network operation is provided in the Learning-based controller and smart underwater tactile perception section. The tensegrity pose served as an input for the thruster’s controllers by combining the B30 depth sensor and the inertial measurement unit on the flight control board. This scheme enabled the U3DTT installed on the AUVs to express more accurately and robustly.
Mechanical and electrical property characterization of RS-TENG
The RS-TENG sensor was capable of actively converting stretching forces into distinguishable electrical signals, as shown in Fig. 2A, where a coiled wire made of Ag-plated carbon steel was chosen as the electrode. This design of the coiled structure could improve the stretchability of the electrode and ensure that the RS-TENG sensor maintained a decent electrical output, even under extreme stretching. The insets of Fig. 2A show 2 enlarged shapes of the sectional drawing located at different positions of the RS-TENG sensor, in which, because of the difference of the electron affinity between the silicone rubber and CNTs, an electric potential was induced by varying the contact area between the 2 materials during the stretch–release cycles. The silicone rubber layer had a strong ability to attract electrons, while the CNT layer tended to lose them, resulting in the generation of triboelectric static charges when the 2 materials approached each other, as schematically shown in Fig. 2B. The triboelectric potential drove electrons to flow along an external circuit from the shielding wire to the ground, while the positive charges built up on the surface of the wire-coiled electrode due to the electrostatic induction effect. Figure S3 shows a more detailed illustration of the electron transfer process during a stretch–release cycle. To visualize the strain and electrical potential distributions between the 2 triboelectric layers, COMSOL Multiphysics was used to verify the working principle, as shown in Fig. 2C and Fig. S4.
To quantify the RS-TENG sensor’s mechanical and electrical characteristics, a linear motor equipped with a force sensor was used to simulate a cyclic stretching force, as shown in Fig. S5. Figure 2D shows that the strain (from 10% to 70%) of the RS-TENG sensor increased with the increase in the stretching force. It is worth noting that the strain of the tensional cables reached a maximum value of 30% when the U3DTT operated under a high load. Namely, the 70% strain design of the RS-TENG sensor was far beyond the requirement for U3DTT operation. Figure 2E shows the output signal at a stretching frequency of 0.5 Hz as the strains varied from 10% to 70%. Furthermore, the relationship between the voltage (U) and external stimuli (ϵ) (U = 0.18086ϵ − 0.15857) is presented in Fig. S6, where the correlation coefficient R2 = 0.98627 indicated that the external stimuli and the output voltage had an approximate linear relationship. It was proven that a reliable electrical output of the RS-TENG sensor could be directly applied to a practical device. The RS-TENG sensor sensitivity is denoted as S1 = ΔU/ΔF. We obtained an excellent sensitivity of 1.8 V/N over a wide strain range and response times of 17 ms (Fig. S7A). To visualize the influence of each factor on the output signal, Fig. 2F depicts the relationship between the output voltage, strain, and stretching frequency, where the slope of the equal-height line reflected the strength of the effects of the 2 factors. As the stretching frequency increased, the output voltage remained almost unchanged. Figure S7B also shows the influence of the stretching frequency from 0.5 to 4 Hz on the voltage signal, which stayed around 11.84 V under a strain of 70%.
Moreover, we measured the influence of the silicone rubber–CNT composite with different CNT concentrations on the output voltage, as shown in Fig. 2G. The output voltage increased with the increase in the CNT concentration. In particular, cross-sectional scanning electron microscopy images of the composites with different CNT concentrations are shown in Fig. S8. The comparison of Fig. S8A and B with Fig. S8C shows that the surface roughness of the composite increased gradually with the CNT concentration, which could result from the disordered mixing of CNTs to a large degree. In addition, the increase ratio of the output voltage was more significant in the strain range from 30% to 40%, guaranteeing an accurate reflection of the stretching force through the voltage signal. The structural parameter of the coiled wire is also a significant indicator for the extreme stretching strain in practical applications that require long-term usage. The Young’s modulus of silicone rubber (3.7895 × 106 N/m2) was much smaller than that of the Ag-plated carbon steel wire (2 × 1011 N/m2), which caused the value of the extreme stretching strain to be mostly governed by the tensile characteristics of the coiled wire. From the inset in Fig. 2H, we obtained the relationship between the spiral angle α and the pitch l [α = tan−1(l/πD)]. Furthermore, the output voltages with different values of the pitch l of the coiled wire were acquired under a strain of 40%, as shown in Fig. 2H. The output signal slightly decreased with the elongation l, which was attributed to the change in the contact area between the 2 triboelectric materials. In addition, the RS-TENG sensor, as a robot-compatible device, should have long-time durability under strain when subjected to robot–environment interactions. As demonstrated in Fig. S9, it maintained a stable electrical output under a strain of 40% after the application of 1, 000 continuous stretching force cycles. It is worth noting that a 40% strain could satisfy the requirement for the U3DTT operating under an impact force. Figure 2I shows the output voltage of the RS-TENG sensor in the underwater environment after repeated impacts from a cyclic stretching force, where the inset to Fig. 2I shows that the 20-cm-long RS-TENG sensor could be stretched to 28 cm. On the basis of the comparison with the output voltage of the RS-TENG sensor in the air, the underwater environment nearly did not degrade the performance of the voltage amplitude under a strain of 40%, even after being soaked in an indoor pool involving long-time testing. It was proven that the air layer between the latex tube and CNTs ensured that triboelectric signals were generated under a stretching force without the interference of the underwater environment.
To illustrate the real-time monitoring ability of the RS-TENG sensor, a tension monitoring system was designed using the fitted relationship between the stretching force and the voltage, as shown in Fig. 2J (also see Movie S1). When the linear motor stretched the RS-TENG sensor, the real-time signals under the cyclic stretching force were directly observed on a Keithley (6514) electrometer. The signals of the cyclic stretching force were recorded under different strains, showing that the stretching force could be clearly recognized on the basis of the voltage magnitude. In conclusion, the RS-TENG sensor possesses a promising sensing ability that enables real-time monitoring of the continuous stretching motion by extracting the voltage magnitude. Furthermore, Fig. 2K shows an electronic setup for controlling light-emitting diodes (LEDs), wherein the LEDs were installed in a line and an Arduino Due R3 was used as a circuit board to perform signal sampling and data processing. Data processing consisted of 2 stages: system initialization and event detection by judging the levels of the peak voltage for the RS-TENG sensor. This framework provides a triggering capability for driving different quantities of LED lights. An electrical diagram is depicted in Fig. S10. In the demonstration, the quantity of the turned-on LED lights increased with the increase in the stretching force (see Movie S2). These results demonstrate the potential for the RS-TENG to recognize its strain, which means that RS-TENG can be integrated into the tensegrity structure and used to complete numerous perception tasks.
Mechanical and electrical property characterization of CP-TENG
Figure 3A and B shows the working mechanism of the CP-TENG sensor. When flexible cover deformation occurred under an external pressing force, due to triboelectrification, electrostatic induction, and Cu having a greater electronegativity than silicone rubber, the electrodes emitted electrons through an external circuit, thus generating a displacement current, as shown in Fig. 3B(II). When the pressing force was removed from the CP-TENG, the Cu electrode was separated from the silicone rubber. The charge distribution returned to its initial state, while the induced negative charges in the electrodes flowed back to the ground, as shown in Fig. 3B(III). This means that the whole generation cycle was complete. The COMSOL software was employed to simulate the potential distribution results between 2 triboelectric materials (see Fig. S11).
Figure 3C shows the generated voltage signals under a pressing frequency of 1 Hz as the force varied from 1 to 17 N. Furthermore, the relationship between the voltage and the external stimuli (U = 0.1395F + 1.6165, R2 = 0.97415) is presented in Fig. S12. The CP-TENG sensor sensitivity is denoted as S2 = ΔU/ΔF, which achieved a lower sensitivity of 0.15 V/N compared to that of S1. This means that the underwater disturbance had little effect on the voltage signal of the device. However, the device output increased significantly when the flexible cover was pressed by the heavy impact force from a collision with an unknown obstacle. The characteristic would allow the location estimation of heavy external forces and an antidisturbance sensing capability. Figure 3D describes the influence of the pressing frequency from 1 to 5 Hz on the voltage signal under a force of 1 N. As the pressing frequency increased, the output voltage remained almost unchanged (also see Fig. S13). In addition, the flexible cover served as a device for measuring the total contact area. As depicted in Fig. 3E, increasing the contact area resulted in a rise in the voltage signals.
We also evaluated the CP-TENG sensors’ response times, a critical indicator for evaluating the performance of the U3DTT for obtaining real-time tactile perception information. Figure 3F shows that the response times were <30 ms, proving the excellent synchronization between the voltage signal and the corresponding pressing force. To further demonstrate the real-time control capability of the CP-TENG sensor, a device integrated with a manipulator was prepared to perform a grasping task, as shown in Fig. 3G, where the voltage from the CP-TENG sensor as a feedback signal was provided with the grasping system (see Fig. S14). Once the peak voltage from the sensor reached the set value, the manipulator stopped the grasping action and then released the grasped object. Moreover, the real-time voltage signal is shown in Fig. 3H (see also Movie S3). The gripping and releasing motions of the manipulator can be recognized from the rising and falling edges of the voltage signal. Thus, the CP-TENG sensor can be employed for real-time perception.
Learning-based controller and smart underwater tactile perception
The experimental setup, including an indoor water pool (5.6 m × 2.7 m × 1.5 m), different shaped obstacles, and position-data acquisition by an optical motion capture system, is depicted in Fig. 4A and Fig. S15. A system with 12 motion capture cameras (DS-2XE8245FWD) was adopted for the measurement of the deformation of the tensegrity structure. The GSM7212 switch was used to link the synchronization device Optitrack eSync to the motion capture cameras. To enable the motion-capture system to obtain the node positions correctly, a hemispherical flexible cover and a circular metal plate were utilized as markers. For simplicity, the nodes are denoted as Ri in Fig. 4B, where i = 1, 2, 3, …, 12. These nodes were connected by 6 rods and 24 tensional cables. We denote the connectivity of the nodes with functions Nc, defined as follows:
NcRi,Rj=l,if tensional cable l connects Ri and Rj0.
For a single sample, the position data of the 12 moving nodes was obtained by the motion-capture system, while the voltage values of 24 RS-TENG sensors and 12 CP-TENG sensors were measured by the microcontroller via the analog-to-digital converter, which represented the variation in the intrinsic properties of the tensegrity structure.
A tactile servoing controller was implemented to explore the surrounding environment via estimating the real-time 3D pose of the U3DTT. The precondition was to develop an adaptive dynamic model that approximated the inverse mapping from the TENG sensor signals to the tensegrity pose. Conventional dynamic approaches demand an accurate description of both the tensegrity structural parameters and actuation response. It remains a well-known challenge for processing multisensor signals coupled with the extraction of relevant features, although a single TENG sensor had an approximate linear relationship between the external stimuli and the voltage. In comparison, data-driven techniques [48] such as DL approaches may take into account modeling uncertainties from the actual operation data, eliminating the requirement for hand-eye calibration. The given learning-based controller was initialized by training a transformer model using time-varying RS-TENG sensor signals and CP-TENG sensor signals as the input and the corresponding node position changes [Ri = (xi,  yi,  zi)] as the output, as shown in Fig. 4C. The model was trained using relative positions for the nodes in the body frame rather than the world frame, which made it more robust to variations in the surrounding environment. We utilized a transformer model supplied by the PyTorch toolkit, where the self-attention mechanism was employed to make improvements to the network components and conduct extensive experiments. The transformer model contained a 3-layer stack and a one-layer stack (1/4 input) in the encoder, a 2-layer decoder, and an Adam optimizer with a learning rate of 0.0001. The detailed structural parameters of the transformer model are available in [49]. The network was trained using the Jetson NX edge computing platform (4/6 core 1,400 MHz) on the AUV. Moreover, to visualize the tensegrity structure pose monitoring in a no-camera underwater environment, pose estimation in real space could be real-time projected to a virtual space. The overall structure of the tactile servoing controller is shown in Fig. 4D.
Underwater characterization of the U3DTT integrated with the AUV
An AUV subjected to external disturbances generally results in a chattering phenomenon in practical environments. This affects the performance of an RS-TENG sensor with excellent sensitivity, which makes it more difficult to analyze the pose of the U3DTT. For steady pose analysis of the U3DTT, the AUV’s antidisturbance control should be considered first in the underwater operation. Here, a structural design with 4 horizontal propellers and 4 vertical propellers was adopted, and there was no interference between the inflow and outflow of the vertical and horizontal propellers, thereby reducing the chattering phenomenon in practical applications. Moreover, a complementary filter was used to compensate for the drift, which affected the gyroscope measurements, and attenuate high-frequency signals, which affected the accelerometer-like vibrations. As a result, the proportional–integral–derivative controller was able to adaptively adjust the proportional–integral–derivative gain for an improved antidisturbance capacity. The robustness of the AUV’s antidisturbance control was subsequently tested, as shown in Fig. 5A. In the antidisturbance testing, a random impact force was applied to the AUV in a set-point state, mainly resulting in a longitudinal position change of the AUV’s center of mass, as shown in Fig. 5A(I and II) (also see Movie S4). The red dashed box in Fig. 5B highlights the voltage signal ripples of the U3DTT, which resulted in a chattering phenomenon of the AUV due to the shifted center of gravity and the unbalanced pitching moment on the vehicle caused by the impact force. When the impact force was removed from the U3DTT, due to the inertial forces during the dropping process of vehicles, the AUV with a U3DTT continued to dive down to the balance depth, as depicted in Fig. 5A(III). The black dotted box in Fig. 5B shows that the voltage gradually flattened. This was because with the aid of data from the inertial sensors and the complementary filter, the AUV was capable of rapidly recovering the set position and attitude without the chattering phenomenon, as shown in Fig. 5A(IV).
AUVs with the U3DTT typically conducted their mission autonomously in the background flow field. Thus, we consider the influence of the flow field on the output voltage. As shown in Fig. 5C and D, the AUV with the U3DTT was placed on a metal rack constructed of section steel. This configuration eliminated the influence of the AUV operation. A flow generator was positioned in several locations around the U3DTT, with a constant relative distance between them, as shown in Fig. 5E. Because of the symmetric structure of the U3DTT, the voltages of the sensors arranged on 4 open isosceles triangles (red lines and black lines) were analyzed to reduce the information complexity. The signal peak showed the influence of changing the position of the flow generator, as shown in Fig. 5F. For the RS-TENG sensors located at the 2 open isosceles triangles formed by the red lines, the signal peaks at positions 1, 2, and 6 were larger than those at positions 3, 4, and 5. The main reason was that bluff bodies (AUV) served to dampen the energy of the water flow, and the RS-TENG sensors were located at the 2 open isosceles triangles formed by the black lines, allowing them to avoid the vortex shedding from the bluff bodies. This characteristic is of great significance for distinguishing different flow directions. Since the stable equilibrium configuration for the U3DTT was achieved by the prestress of the tension network, there was a little difference in the voltage between Nc(R10,  R4) and Nc(R9,  R2). In particular, Fig. 5G shows that the voltage decreased slowly as the prestress increased. The prestress could reduce the influence of the working load from the flow field on the output signal. It is worth noting that the working sensitivity of the RS-TENG also decreased as with the increase in the prestress. In addition, Fig. 5H shows the signal peak of the CP-TENG (R2, R4, R9, R10) at position 1, in which the flow field had little influence of CP-TENG on the voltage due to its lower sensitivity.
For gathering data from physical interactions between the tensegrity and its surroundings, the human operator used a transparent acrylic sheet to perform the compressing action toward isosceles triangle surfaces in different orientations, as shown in Fig. 6A (also see Movie S5). Timestamped data of the U3DTT were recorded on a microSD card at 120 Hz by the Jetson board. Fifty samples were collected and divided randomly into training/testing sets in the ratio of 80/20, respectively. The total number of epochs was set to 10 equipped with a suitable early stopping rule, in which we used the specified comparison techniques and a batch size of 32. From Table S1, the average root-mean-square error (RMSE) for the training data was around 0.3373, while the average RMSE for the testing data was about 1.732. In particular, the RMSE for case 41 was roughly 3.7, whereas it was 0.9 for case 47. When predicting sequences was set to 50, the initially prolonging input length reduced performance, but further increasing led the RMSE to drop because of the addition of repeating short-term patterns in Fig. 6B.
Moreover, to demonstrate the practical usage of the proposed device, the virtual environment was built to visualize the real-time tensegrity pose in the underwater through the DL prediction. Unlike the camera-based monitoring that normally involves video-taken concerns, this monitoring system employed a digital twin of the tensegrity structure to show the deformation of the U3DTT based on the interaction between the tensegrity and its surroundings in the virtual underwater environment, which were basic parameters required for the application of the surrounding environment estimation. The overall structure of the tactile monitoring system is shown in Figs. 1F and 4D. When the U3DTT first collide with an obstacle in Fig. 6C, a large pulse signal is generated from the CP-TENG sensor at R4 position in Fig. S16. Then, the impact force was redistributed to the tension network, generating the corresponding signal of the RS-TENG sensors in Fig. S17. Figure 6D and E shows the different positions of collision in real-time sensing (also see Movie S6). As shown in Fig. 6F, the full-cycle output signal was analyzed by the trained DL model to predict the deformation of the U3DTT with the RMSE of 0.76 and then obtain the information of surrounding environment of the underwater vehicle. Note that compared with rod length, the error was acceptable for the tactile system. In addition, these information can be moved to the digital twin for visualizing the deformation of the U3DTT. Furthermore, the U3DTT was used for 3D environment recognition in a narrow tunnel in Movie S7. Figures S18 to S29 show that the predicted data (blue point) track the actual data (red line) well with the RMSE of 0.84, with the corresponding signals of the RS-TENG sensors and the CP-TENG sensors in Figs. S30 and S31. More importantly, the environment-sensing tensegrity device has no influence of optical or sonic issues in the narrow space, thus can be used in dark environments with uneven surfaces and materials with different refractive indices. Overall, these capabilities show the great potential of the underwater tactile perception system based on the U3DTT in autonomously explore an unknown underwater environment.
Discussion
Less
We have developed the U3DTT based on TENGs and DL-based data analytics to explore an unknown environment, providing a technologically mediated method for the interactions between underwater vehicles and their surroundings, especially when optical or acoustic reflection problems occur in a narrow space. Compared with other 2D tactile devices, our DL-assisted U3DTT provided a variety of attractive characteristics, including multiple DOFs, a high sensitivity, a low cost, fast response times, and conformability.
The U3DTT is a contact-electrification-based device in which the contact area of 2 different materials having opposite triboelectric polarization is periodically changed, which can effectively convert minor tensile forces or pressures into electricity. In particular, the RS-TENG sensor with wire-coiled electrodes was capable of sensing the magnitudes of stretching forces and the position of the force through the device array, showing an excellent sensitivity of 1.8 V/N in a wide strain range of up to 70%. The integration of the wire-coiled electrodes had a high recovery capacity, resulting in good sensing repeatability. In addition, the CP-TENG sensor could measure the pressing motion resulting from a collision and was also resistant to mechanical fatigue. Because of the mechanical design of the thicker flexible cover, it maintained high stability against environmental disturbances. The real-time signal processing capability of the sensory system indicated the potential of achieving interactions between an underwater vehicle and its surroundings. With the aid of the DL to deal with multichannel inputs, the AUV with the U3DTT achieved successful perception and had the average RMSE of about 1.732 for testing data, while the average RMSE for the training data was around 0.3373. In addition, it had an antidisturbance ability to ensure stable measurement. The 3D tactile perception systems based on DL-assisted U3DTT can provide 3D sensing feedback for controlling an underwater vehicle in various tasks, suggesting their potential applicability in vehicles with tactile feedback.
Methods
Less
Fabrication of RS-TENG sensor
As shown in Fig. S32, 100 ml of part A and 100 ml of part B silicone rubber were mixed in a Petri dish. Then, a vacuum pump was used to vacuum the mixture to 0.1 MPa for 3 min. When the evacuation of the mixture was complete, the mixture was poured into 2 half-circular molds manufactured by 3D printing. A commercial wire coil (Ag-plated carbon steel) was inserted into the mixture. After combining these 2 half-circular tubes for encapsulation, the silicone rubber was cured naturally at room temperature. The cured silicone rubber was demolded from the molds. CNTs with a resistivity of 1, 412 μΩ-m were added to silicone rubber and subjected to ultrasonic mixing for 5 min to uniformly disperse the CNTs in the silicone rubber. A wire coil was dipped into the CNT dispersed solution for 1 min, followed by air for curing naturally at room temperature. Finally, a latex tube with a 3-mm wall thickness was used for encapsulation.
Fabrication of CP-TENG sensor
The flexible cover was made of Dragonskin 10, as shown in Fig. S33. Specifically, 40 ml of part A and 40 ml of part B silicone rubber were mixed in a Petri dish. Then, a vacuum pump was used to vacuum the mixture to 0.1 MPa for 3 min. When the evacuation of the mixture was finished, the mixture was poured into a mold manufactured by 3D printing. The silicone rubber was cured naturally at room temperature. Finally, a commercial checkerboard-shaped Cu block and hemispherical cover were assembled using Kafuter K-704 glue.
Fabrication of the U3DTT
The tensegrity structure was an icosahedron mainly composed of 6 rigid bars, 24 RS-TENG sensors, and 12 CP-TENG sensors. Multiple sensors could not be mounted on the same node unless additional safeguards were used to ensure that they did not interfere with one another. As a result, each end of each bar was equipped with a flange, as shown in Fig. S34. Four studs were required to secure several sensors to each flange. The RS-TENG sensor was placed into the groove of a metal lock and then connected to a stud installed on the flange using a steel wire to guarantee that the RS-TENG sensor remained attached to the flange during recurrent elongation and contraction periods. The CP-TENG sensor was mounted on the flange’s center. It is a location for markers identified by the motion capture system.
Electric measurement and characterization
Field-emission scanning electron microscopy (OLS4000) is used to characterize the surface morphology of silicone rubber-CNT composite. For the electric output measurement of TENG, a linear motor (LINMOT EI200-P01) equipped with a force sensor (LZ-WL2) is used to simulate a cyclic stretching/pressing force. The voltage signal is measured using a Keithley (6514) electrometer. The NI-6259 is used to gather data. The software platform is built on LabVIEW, which enables the control and analysis of real-time data gathering.
References
Less
1.
Sahoo A, Dwivedy SK, Robi PS. Advancements in the field of autonomous underwater vehicle. Ocean Eng. 2019;181:145–160.
2.
Zhang Y, Liu X, Luo M, Yang C. MPC-based 3-D trajectory tracking for an autonomous underwater vehicle with constraints in complex ocean environments. Ocean Eng. 2019;189:106309.
3.
Melo J, Matos A. Survey on advances on terrain based navigation for autonomous underwater vehicles. Ocean Eng. 2017;139:250–264.
4.
He B, Zhang H, Li C, Zhang S, Liang Y, Yan T. Autonomous navigation for autonomous underwater vehicles based on information filters and active. Sensors. 2011;11:10958–10980.
5.
Vidal E, Palomeras N, Istenič K, Gracias N, Carreras M. Multisensor online 3D view planning for autonomous underwater exploration. J Field Robot. 2020;37:1123–1147.
6.
Lin YH, Shou KP, Huang LJ. The initial study of lls-based binocular stereo-vision system on underwater 3d image reconstruction in the laboratory. J Mar Sci Technol. 2017;22:513–532.
7.
Foresti GL. Visual inspection of sea bottom structures by an autonomous underwater vehicle. IEEE Trans Syst Man Cybern B Cybern. 2001;31:691–705.
8.
Bruno F, Bianco G, Muzzupappa M, Barone S, Razionale AV. Experimentation of structured light and stereo vision for underwater 3d reconstruction. ISPRS J Photogramm Remote Sens. 2011;66:508–518.
9.
Dimitratos SD, Hommel AS, Konrad KD, Simpson LM, Wu-Woods JJ, Woods DF. Biosensors to monitor water quality utilizing insect odorant-binding proteins as detector elements. Biosensors. 2019;9:62.
10.
Zha J, Wu X, Kroeger J, Perez N, Mueller MW. A collision-resilient aerial vehicle with icosahedron tensegrity structure. Paper presented at: 2020 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS); 2020 October 24–2021 January 24; Las Vegas, NV, USA; p. 1407–1412.
11.
Paul C, Valero-Cuevas FJ, Lipson H. Design and control of tensegrity robots for locomotion. IEEE Trans Robot. 2006;22:944–957.
12.
Wang Z, Li K, He Q, Cai S. A light powered ultralight tensegrity robot with high deformability and load capacity. Adv Mater. 2019;31:1806849.
13.
Sabelhaus AP, Bruce J, Caluwaerts K, Manovi P, Firoozi RF, Dobi S, Agogino AM, SunSpiral V, System design and locomotion of SUPERball, an untethered tensegrity robot. Paper presented at: 2015 IEEE International Conference on Robotics and Automation (ICRA); 2015 May 26–30; Seattle, WA, USA; p. 2867–2873.
14.
Bruce J, Caluwaerts K, Iscen A, Sabelhaus AP, SunSpiral V. Design and evolution of a modular tensegrity robot platform. Paper presented at: 2014 IEEE International Conference on Robotics and Automation; 2014 May 31–2014 June 7; Hong Kong, China; 3483–3489.
15.
Vespignani M, Friesen JM, SunSpiral V, Bruceet J. Design of SUPERball v2, a compliant tensegrity robot for absorbing large impacts. Paper presented at: 2018 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS); 2018 October 1–5; Madrid, Spain; p. 2865–2871.
16.
Caluwaerts K, Bruce J, Friesen JM, SunSpiral V, State estimation for tensegrity robots. Paper presented at: 2016 IEEE International Conference on Robotics and Automation; 2016 May 16–21; Stockholm, Sweden; p. 1860–1865.
17.
Barkan, A. R. et al. Force-sensing tensegrity for investigating physical human-robot interaction in compliant robotic systems. Paper presented at: 2021 IEEE International Conference onRobot and Automation; 2021 May 30–June 5; p. 3292–3298.
18.
Kuzdeuov A, Rubagotti M, Varol HA. Neural network augmented sensor fusion for pose estimation of tensegrity manipulators. IEEE Sensors J. 2019;20:3655–3666.
19.
Li WY, Takata A, Nabae H, Endo G, Suzumori K. Shape recognition of a tensegrity with soft sensor threads and artificial muscles using a recurrent neural network. IEEE Robot Autom Lett. 2021;6:6228–6234.
20.
Zhai F, Feng Y, Li Z, Xie Y, Ge J, Wang H, Qiu W, Feng W. 4D-printed untethered self-propelling soft robot with tactile perception: Rolling, racing, and exploring. Matter. 2021;4:3313–3326.
21.
Prado da Fonseca V, Alves de Oliveira TE, Petriu EM. Estimating the orientation of objects from tactile sensing data using machine learning methods and visual frames of reference. Sensors. 2019;19:2285.
22.
Li Q, Kroemer O, Su Z, Veiga FF, Kaboli M, Ritter HJ. A review of tactile information: Perception and action through touch. IEEE Trans Robot. 2020;36:1619–1634.
23.
Zheng W, Liu H, Sun F. Lifelong visual-tactile cross-modal learning for robotic material perception. IEEE Trans Neural Netw Learn Syst. 2020;32:1192–1203.
24.
Kappassov Z, Corrales JA, Perdereau V. Touch driven controller and tactile features for physical interactions. Rob Auton Syst. 2020;123:103332.
25.
Nuckols RW, Lee S, Swaminathan K, Orzel D, Howe RD, Walsh CJ. Individualization of exosuit assistance based on measured muscle dynamics during versatile walking. Sci Robot. 2021;6:eabj1362.
26.
Liu M, Zhang Y, Wang J, Qin N, Yang H, Sun K, Hao J, Shu L, Liu J, Chen Q, et al. A star-nose-like tactile-olfactory bionic sensing array for robust object recognition in non-visual environments. Nat Commun. 2022;13(1):79.
27.
Navarro SE, Nagels S, Alagi H, Faller LM, Goury O, Morales-Bieze T, Zangl H, Hein B, Ramakers R, Deferme W, et al. A model-based sensor fusion approach for force and shape estimation in soft robotics. IEEE Robot Autom Lett. 2020;5:5621–5628.
28.
Ma Z, Wang Q, Wu Z, Chen D, Yan C, Shi Y, Dickey MD, Su B. A superconducting material based maglev generator used for outer space. Adv Mater. 2022;34:2203814.
29.
Zhang X, Wang Q, Zou R, Song B, Yan C, Shi Y, Su B. 3D-printed Superhydrophobic and magnetic device that can self-powered sense a tiny droplet impact. Engineering. 2022;15:196–205.
30.
Thandiackal R, Melo K, Paez L, Herault J, Kano T, Akiyama K, Boyer F, Ryczko D, Ishiguro A, Ijspeert AJ. Emergence of robust self-organized undulatory swimming based on local hydrodynamic force sensing. Sci Robot. 2021;6:eabf6354.
31.
Boutry CM, Negre M, Jorda M, Vardoulis O, Chortos A, Khatib O, Bao Z. A hierarchically patterned, bioinspired e-skin able to detect the direction of applied pressure for robotics. Sci Robot. 2018;3:eaau6914.
32.
Beem H, Hildner M, Triantafyllou M. Characterization of a harbor seal whisker-inspired flow sensor. Paper presented at: 2012 Oceans; 2012 October 14–19; Hampton Roads, VA, USA; p. 1–4.
33.
Beem H, Liu Y, Barbastathis G, Triantafyllou M. Vortex-induced vibration measurements of seal whiskers using digital holography. Paper presented at: OCEANS 2014 - Taipei; 2014 April 7–10; Taipei, Taiwan; p. 1–4.
34.
Jin T, Sun Z, Li L, Zhang Q, Zhu M, Zhang Z, Yuan G, Chen T, Tian Y, Hou X. Triboelectric nanogenerator sensors for soft robotics aiming at digital twin applications. Nat Commun. 2020;11(1):5381.
35.
Wen F, Zhang Z, He T, Lee C. AI enabled sign language recognition and VR space bidirectional communication using triboelectric smart glove. Nat Commun. 2021;12:5378.
36.
Xia X, Fu JJ, Zi YL. A universal standardized method for output capability assessment of nanogenerators. Nat Commun. 2019;10(1):4428.
37.
Wang H, Cheng J, Wang ZZ, Ji LH, Wang ZL. Triboelectric nanogenerators for human-health care. Sci Bull. 2020;66(5):490–511.
38.
Xie WB, Xie W, Gao L, Wu L, Chen X, Wang F, Tong D, Zhang J, Lan J, He X, et al. A nonresonant hybridized electromagnetic-triboelectric nanogenerator for irregular and ultralow frequency blue energy harvesting. Research. 2021;2021:5963293.
39.
Wang X, Liu J, Wang S, Zheng J, Guan T, Liu X, Wang T, Chen T, Wang H, Xie G. A self powered triboelectric coral like sensor integrated buoy for irregular and UltraLow Frequency Ocean wave monitoring. Adv Mater Technol. 2021;7, 2101098(6).
40.
Wang ZL, Jiang T, Xu L. Toward the blue energy dream by triboelectric nanogenerator networks. Nano Energy. 2017;39:9–23.
41.
Shi Q, Wang H, Wu H, Lee CK. Self-powered triboelectric nanogenerator buoy ball for applications ranging from environment monitoring to water wave energy farm. Nano Energy. 2017;40:203–213.
42.
Wu J, Qin L, Chen N, Qian C, Zheng S. Investigation on a spring-integrated mechanical power take off system for wave energy conversion purpose. Energy. 2022;245:123318.
43.
Wu ZY, Zhang B, Zou H, Lin Z, Liu G, Wang ZL. Multifunctional sensor based on translational-rotary triboelectric nanogenerator. Adv Energy Mater. 2019;9:1901124.
44.
Cao R, Wang J, Zhao S, Yang W, Yuan Z, Yin Y, du X, Li NW, Zhang X, Li X, et al. Self-powered nanofiber-based screen-print triboelectric sensors for respiratory monitoring. Nano Res. 2018;11:3771–3779.
45.
Zhou Z, Chen K, Li X, Zhang S, Wu Y, Zhou Y, Meng K, Sun C, He Q, Fan W, et al. Sign-to-speech translation using machine-learning-assisted stretchable sensor arrays. Nat Electron. 2020;3:571–578.
46.
Xu P, Wang X, Wang S, Chen T, Liu J, Zheng J, Li W, Xu M, Tao J, et al. A triboelectric-based artificial whisker for reactive obstacle avoidance and local mapping. Research. 2021;2021:9864967.
47.
Xu P, Liu J, Liu X, Wang X, Zheng J, Wang S, Chen T, Wang H, Wang C, Fu X, et al. A bio-inspired and self-powered triboelectric tactile sensor for underwater vehicle perception. Npj Flex Electron. 2022;6:25.
48.
Lee KH, Fu DKC, Leong MCW, Chow M, Fu HC, Althoefer K, Sze KY, Yeung CK, Kwok KW. Nonparametric online learning control for soft continuum robot: An enabling technique for effective endoscopic navigation. Soft Robot. 2017;4:324–337.
49.
Zhou H, Zhang S, Peng J, Zhang S, Li J, Xiong H, Zhang W. Beyond efficient transformer for long sequence time-series forecasting. Proc Conf AAAI Artif Intell. 2021;35(12):11106–11115.
Appendix
Less
Year 2023 volume 6 Issue 2
PDF
69
38
Cite this Article
BibTeX
Article Info
doi: 10.34133/research.0062
  • Receive Date：2022-10-22
  • Online Date：2026-10-27
  • Published：2023-02-20
Article Data
Affiliations
History
  • Received：2022-10-22
  • Accepted：2023-01-09
Affiliations
    1Dalian Key Laboratory of Marine Micro/Nano Energy and Self-powered Systems, Marine Engineering College, Dalian Maritime University, Dalian 116026, China.
    2School of Information Science and Technology, Dalian Maritime University, Dalian 116026, China.
    3Intelligent Biomimetic Design Lab, College of Engineering, Peking University, Beijing 100871, China.
    4Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences, Beijing 100871, China.
    5School of Materials Science and Engineering, Georgia Institute of Technology, Atlanta, GA 30332-0245, USA.

Corresponding:

* Address correspondence to: (M.X.)
(G.X.)
(Z.L.W.)
References
Share
https://castjournals.cast.org.cn/joweb/research/EN/10.34133/research.0062
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family		 属数
Number of
genus		 种数
Number of
species		 占总种数比例
Percentage of
total species (%)		 属
Genus		 种数
Number of
species		 占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT
Links
Articles
Latest Articles
Most Read
Collections
Updates
Events
News
Multimedia
About
About Us
Contact
No. 86 Xueyuan South Road, Haidian District, Beijing
100081
010-62662699(Operation and Technical Support)
qkjq@cast.org.cn

Copyright © 2025 China Association for Science and Technology. All rights reserved. For all open access content, the relevant licensing terms apply.
Sponsored by the Office of the Leading Group for Cybersecurity and Informatization of CAST, and supported by Science and Technology Review Publishing House