Home Journals Articles Updates About
CN
image
收藏切换
Triple-Columned and Multiple-Layered 3D Polymers: Design, Synthesis, Aggregation-Induced Emission (AIE), and Computational Study
收藏切换
PDF
Guanzhao Wu1, 2, Yangxue Liu1, Zhen Yang2, Liulei Ma1, Yao Tang1, Xianliang Zhao1, Hossein Rouh1, Qixuan Zheng1, Peng Zhou2, Jia-Yin Wang2, Farhan Siddique3, Sai Zhang1, Shengzhou Jin2, Daniel Unruh1, Adelia J. A. Aquino3, 4, Hans Lischka1, 3, Kristin M. Hutchins1, Guigen Li1, 2
Research. Vol 2021 Article ID 3565791
Less
收藏切换
Research. Vol 2021 Article ID 3565791
• Research Article •
Triple-Columned and Multiple-Layered 3D Polymers: Design, Synthesis, Aggregation-Induced Emission (AIE), and Computational Study
Full
Guanzhao Wu1, 2, Yangxue Liu1, Zhen Yang2, Liulei Ma1, Yao Tang1, Xianliang Zhao1, Hossein Rouh1, Qixuan Zheng1, Peng Zhou2, Jia-Yin Wang2, Farhan Siddique3, Sai Zhang1, Shengzhou Jin2, Daniel Unruh1, Adelia J. A. Aquino3, 4, Hans Lischka1, 3, Kristin M. Hutchins1, Guigen Li1, 2
Affiliations
  • 1Department of Chemistry and Biochemistry, Texas Tech University, Lubbock, Texas 79409-1061, USA
  • 2Institute of Chemistry and Biomedical Sciences, School of Chemistry and Chemical Engineering, Nanjing University, Nanjing 210093, China
  • 3School of Pharmaceutical Sciences and Technology, Tianjin University, Tianjin 300072, China
  • 4Department of Mechanical Engineering, Texas Tech University, Lubbock, TX 79409, USA
About Author:

Authors’ Contributions

G. Li conceived the project and wrote the paper. A. J. A. Aquino, H. Lischka, and F. Siddique performed computations and wrote the corresponding part. K. M. Hutchins and Q. Zheng performed GPC analysis. G. Wu, Y. Liu, Z. Yang, L. Ma, Y. Tang, X. Zhao, H. Rouh, P. Zhou, J. Wang, S. Zhang, and S. Jin performed synthetic experiments and data analysis. D. Unruh conducted X-ray diffraction analysis. Guanzhao Wu, Yangxue Liu, and Zhen Yang contributed equally to this work.

Published: 2021-02-20 doi: 10.34133/2021/3565791
Outline
收藏切换

Conjugated polymers and oligomers have great potentials in various fields, especially in materials and biological sciences because of their intriguing electronic and optoelectronic properties. In recent years, the through-space conjugation system has emerged as a new assembled pattern of multidimensional polymers. Here, a novel series of structurally condensed multicolumn/multilayer 3D polymers and oligomers have been designed and synthesized through one-pot Suzuki polycondensation (SPC). The intramolecularly stacked arrangement of polymers can be supported by either X-ray structural analysis or computational analysis. In all cases, polymers were obtained with modest to good yields, as determined by GPC and 1H-NMR. MALDI-TOF analysis has proven the speculation of the step-growth process of this polymerization. The computational study of ab initio and DFT calculations based on trimer and pentamer models gives details of the structures and the electronic transition. Experimental results of optical and AIE research confirmed by calculation indicates that the present work would facilitate the research and applications in materials.

Guanzhao Wu, Yangxue Liu, Zhen Yang, Liulei Ma, Yao Tang, Xianliang Zhao, Hossein Rouh, Qixuan Zheng, Peng Zhou, Jia-Yin Wang, Farhan Siddique, Sai Zhang, Shengzhou Jin, Daniel Unruh, Adelia J. A. Aquino, Hans Lischka, Kristin M. Hutchins, Guigen Li. Triple-Columned and Multiple-Layered 3D Polymers: Design, Synthesis, Aggregation-Induced Emission (AIE), and Computational Study[J]. Research, 2021 , 2021 (2) : 3565791 - . DOI: 10.34133/2021/3565791
Full Text
Less
1. Introduction
Less
Molecular design has been playing a key role in polymer and material sciences in searching for desired chemical, physical, and biological properties [1–8]. This is particularly applicable to the research on conductive polymers, which has been among the most active topics in the past two decades [9–14]. Properties of conductive polymers are mainly attributed to the conjugation through monomeric connections by C-C double or triple bonds for delocalizing π-electrons throughout their backbones [15–17]. Besides traditional bonding pathways, the through-space conjugation has emerged as an alternative fashion for energy and charge transfers in polymers [11, 18, 19]. For example, the latest through-space electronic transfer was developed for organic light emitting devices by using XPT and XtBuCT as dopants which enabled electroluminescence external quantum efficiencies as high as 10% [20]. A similar through-space transfer through singlet fission (SF) involved absorption of photons by two electronically interacting chromophores to produce a singlet exciton state followed by rapid formation of two triplet excitons [21]. In the meanwhile, charge-transfer pathways hybridizing σ, π-, and through-space interactions have been proven to be feasible by carefully designing monomeric structures for poly- or copolymerizations [4, 6, 22]. These conjugated polymers displayed a series of electronic and optoelectronic properties, including aggregation-induced emission (AIE)/aggregation-enhanced emission (AEE), conduction, thermally activated delayed fluorescence, optical nonlinearity, bipolar charge transport, and multichannel and photocatalysis [18]. In biological systems, energetics of the H+/2e− transferring was found to exist between planar nicotinamide adenine dinucleotide (NADH) and protein-bound flavin (FMN) cofactors [23].
Very recently, our labs have reported the work on multilayer 3D chirality of C2- and/or pseudo C2-symmetry as new chirality consisting of three layers: top, middle, and bottom layers [24–27]. It shows that the top and bottom layers restrict each other from free axial rotation, i.e., if either top or bottom layer is removed, this 3D chirality would not exist. The resulting multilayer 3D chiral products displayed macro chirality phenomena that can be directly observed with the naked eyes without the aid of microscopic devices (Figure 1(a)). For example, when CDCl3-solution containing a 3D compound was slowly evaporated at room temperature for several weeks, right-handed and spirotextile-shaped solids were formed inside NMR tubes (Figure 1(a), A and B). Nearly all 3D products displayed strong fluorescence in both solid and solution forms, on TLC plates and in silica gel columns (Figure 1(b)).
We also found that changing functional groups in multilayer 3D chiral molecules resulted in the change of their luminescence colors from gold to deep blue under UV irradiation. These molecules presented strong aggregation-induced emission (AIE) [28–32], in which the higher the fraction of water, the stronger the luminescence. Upon irradiation under polarized light, some chiral 3D molecules showed abnormally high optical rotation; this has been very rare in known chiral compounds, indicating their potentials for the development of optical materials and devices in the future.
Our next ambition is to render multilayer chiral 3D polymers by using the above monomeric motifs. In fact, these chiral polymers have not been documented in literature yet. Obviously, our initial strategy should be started from the design and synthesis of their counterparts, including achiral or racemic multilayer polymers. The literature search reveals that multiple-layered polymers have been established and displayed various attractive properties. For example, Nakano reported poly-(dibenzofulvene)s with π-stacked conformers displaying higher hole drift mobility than the through-bond conjugated poly(phenylenevinylene) [10]. Morisaki and Chujo synthesized [2.2]paracyclophane-layered polymers by attaching fluorescence quenchers at the ends of polymer chains, and they found that these properties are attributed to photoexcited energy transporting from the layered [2.2]paracyclophane to terminal structural units [15a, 21]. Jagtap and Collard reported 2D multilayered π-stacked conjugated polymers by using U-turn pseudogeminal[2.2]paracyclophane scaffolds, and they found that these polymers showed broad fluorescence emission and large Stokes shift as comparing to model unstacked linear analogs [33–35]. However, the above multilayer polymers are anchored with either longer bridges or expended bridge heads (columns). Their structural flexibility makes it extremely difficult to achieve repeated patterns of multicolumn/multilayer polymers and their chiral counterparts in future research. In fact, shortened and condensed multilayer polymers have not been developed, which is probably due to the fact that an efficient catalytic system for their synthesis has not been found. Furthermore, there has not been work on aggregation-induced emission (AIE) of multilayered polymers in the literature thus far, although AIE of other planar/stereopolymers has been documented by Li’s team who discovered AIE photophysical phenomenon in 2001 [11].
In this report, we would like to disclose our preliminary results on the design, synthesis, AIE properties, and computational studies of structurally condensed multicolumn and multilayer polymers and their oligomers (Figure 2). New Suzuki-Miyaura catalytic systems were found to be crucial for the synthesis of condensed multilayer 3D polymers in which only one aromatic plane exists between each pair of naphthalene-holding skeletons (Figure 2, 1A–1E). The intramolecularly stacked arrangement of new polymers can be supported by X-ray structural analysis of individual monomers; this would be the first X-ray structures reported on condensed monomers (Figure 3(a)). The unusual intermolecular packing and shaping of these planar compounds are also presented for the first time (Figure 3(c)). It is anticipated that shortened/condensed stereochemical arrangements of planar units within resulting multicolumn/multilayer polymers would make through-space transfers and intermolecular face-to-face packing more efficient. Therefore, the present work would benefit the research and applications of materials with regard to more challenging and desired chemical, electrical, magnetic, and optical properties; aggregation-induced emission (AIE); and other properties in the future.
2. Results
Less
2.1. Retrosynthetic Analysis (RSA)
Corey’s retrosynthetic analysis (RSA) [36] revealed that there are several synthetic strategies to assemble the present multilayer 3D polymers. The assembly takes advantage of the Suzuki-Miyaura C-C coupling under modified catalytic conditions (Figure 4) [37]. The thiadiazole scaffold occupies a special status in polymer science [38], and it also played an important role for the discovery of three-layer 3D chirality [24]. We thus select its copolymer 1A (Figure 4) as a representative for retrosynthetic analysis and polymer synthesis. As described in Figure 4, the first feasible route is to involve synthons of naphthalene-1,8-diyldiboronic acid or 1,8-bis(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)naphthalene for coupling with 4,7-dibromobenzo[c][1,2,5]thiadiazole (strategy A). Unfortunately, we have not been able to prepare these two boron-based column synthons. Several other attempts also failed in this synthesis. We then turned our attention to the synthons of 1,8-dibromonaphthalene, 4,7-bis(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)benzo[c][1,2,5]thiadiazole, and benzo[c][1,2,5]thiadiazole-4,7-diyldiboronic acid (Figure 4, strategy B). The straightforward one-step conversion of 4,7-bis(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)benzo[c][1,2,5]thiadiazole into its boronic acid derivative serves as an extra bonus for this favorable route for the present copolymerization.
2.2. Synthesis and Structural Analysis
The synthesis of monomers was started from the preparation of 1,8-dibromonaphthalene 1, 1,8-dibromo-2,7-dimethoxynaphthalene 2, 4,7-bis(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)benzo[c][1,2,5]thiadiazole 3, 1,4-bis(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)benzene 4, 2,2′-(2,5-dimethoxy-1,4-phenylene)bis(4,4,5,5-tetramethyl-1,3,2-dioxaborolane) 5, and (2,5-dimethoxy-1,4-phenylene)diboronic acid 6 (Scheme 1(a)). 1,8-Dibromonaphthalene 1 was synthesized via oxidative cyclization by reacting naphthalene-1,8-diamine with sodium nitrite in aqueous media containing acetic acid to give 1H-naphtho[1,8-de][1,2,3]triazine [39, 40]. Ring-opening of the resulting triazine was performed by continuously treating with sodium nitrite and then with a mixture of CuBr in 47% HBr solution to give a yield of 25%.
The thiadiazole bridge building block 3 was obtained through the catalytic carbon-boron coupling of 4,7-dibromo-2,1,3-benzothiadiazole with bis(pinacolato)diboron in cosolvents of CH2Cl2 and 1,4-dioxane in the presence of (1,1-bis(diphenylphosphino)ferrocene) dichloropalladium (II) as the catalyst and K2CO3 as an additive [41]. (2,5-Dimethoxy-1,4-phenylene)diboronic acid 6 was obtained via a three-step synthesis [42]. Dibromination of 1,4-dimethoxybenzene gave 1,4-dibromo-2,5-dimethoxybenzene which was converted into the Grignard reagent of magnesium dibromide. The treatment of the resulting Grignard with trimethyl borate was followed by hydrolysis with aqueous H2SO4 to give 6 in an overall yield of 31%. Unfortunately, the use of (2,5-dimethoxy-1,4-phenylene)diboronic acid 6 for this present polymerization did not give satisfactory results. 2,2′-(2,5-Dimethoxy-1,4-phenylene)bis(4,4,5,5-tetramethyl-1,3,2-dioxaborolane) 5 was then employed as a replacement. The synthesis of the latter was started from dibromination of 1,4-dimethoxybenzene followed by treating with 2-isopropoxy-4,4,5,5-tetramethyl-1,3,2-dioxaborolane to give an overall yield of 25% [43].
Previous aromatic ring-layered polymers can be synthesized under modified Suzuki-Miyaura catalytic coupling requiring relatively short polymerization periods (48 h) [10, 44]. This was attributed to the fact that the corresponding monomers have either longer bridges, such as more than one aromatic ring and an aromatic ring anchored with carbon-carbon triple bond, or larger columns, such as 2,7-ditert-butyl-4,5-diiodo-9,9-dimethylxanthene and 1,4-diiodo-2,5-bis(nonyloxy)benzene. In our cases, five to seven days are spent to generate multilayer 3D polymers and to cap their ends for proton NMR analysis.
For the synthesis of polymers, we choose polymer 1C in Scheme 1 as a representative for description. Multiple Suzuki-Miyaura C-C couplings were conducted by slightly modifying the classical Suzuki-Miyaura coupling system. A ratio of 0.87 : 1 of 1,8-dibromonaphthalene to 2,2′-(2,5-dimethoxy-1,4-phenylene)bis(4,4,5,5-tetramethyl-1,3,2-dioxaborolane) was mixed in THF/H2O (5 : 1, v/v) in the presence of Pd(PPh3)4 (5% mol) as catalyst and potassium carbonate (3.0 equiv) as an additive. The reaction was stirred at 85°C for over 48 h with monomeric starting materials being consumed. However, this condition resulted in the mixture being contaminated with some oligomers showing broad peaks at chemical shift around 1.0 in the 1H-NMR spectrum. We then changed the ratios of 1,8-dibromonaphthalene to 2,2′-(2,5-dimethoxy-1,4-phenylene)bis(4,4,5,5-tetramethyl-1,3,2-dioxaborolane) to 1 : 1 and 1.1 : 1. and conducted the reaction over 48 hours. The quality of polymeric products in the latter case was substantially improved for the case of the 1.1 : 1 ratio and gave a chemical yield of 38.9%. The crude products were washed with methanol several times and contained nearly no small oligomers as revealed by MeO- signal in 1H-NMR analysis with DMSO-d6 as solvent.
For this set of catalytic polymerizations, the reaction mixture is colorless at the beginning as shown in Figure 5(a). A green color appeared after the reaction was performed for about 6 hours while being heated/stirred at 85°C when irradiated under UV. This color became darker as the reaction continues occurring, which indicates the formation of polymers/oligomers. At the same time, more solids were accumulated during the polymerization progress. The MALDI-TOF mass spectrum revealed that a series of multilayer oligomers, such as six to nine layers of oligomers, are formed (Figure 5(b)). Very small amounts of these oligomers remained at the end of reaction and showed dark blue in the mother liquor solution (Figure 5(c), A).
It is extremely difficult to separate individual oligomers via column chromatography in which these compounds also display a light blue color, and a small amount of polymer stuck on top of the silica gel showed a gold yellow color (Figure 5(c), B). We attempted recrystallization of any of these relatively higher oligomers, but failed. However, we successfully obtained several X-ray structures of similar three-layer compounds (Figure 3(a)), which can directly confirm the multiple-layered higher oligomers and polymers.
The compound 7 (Figure 3(a)) was obtained by reacting 1,4-bis(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)benzene (1.0 equiv) and 1,8-dibromonaphthalene (2.2 equiv) in the presence of Pd(PPh3)4 followed by another coupling with p-tolylboronic acid. Compound 8 (Figure 3(a)) was synthesized through a similar route to that of 7. Compound 9 was generated by reacting 4,7-bis(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)benzo[c][1,2,5]thiadiazole (1.0 equiv) and 1,8-dibromonaphthalene (1.1 equiv) in the presence of Pd(PPh3)4. Compound 10 was obtained through a six-step synthesis involving two key couplings: (a) the coupling of 4,7-bis(8-bromonaphthalen-1-yl)benzo[c][1,2,5]thiadiazole with (BPin)2 to afford 4,7-bis(8-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)naphthalen-1-yl)benzo[c][1,2,5]thiadiazole, and (b) the coupling of the above benzo[c][1,2,5]thiadiazole with 4,7-dibromobenzo[c][1,2,5]thiadiazole. To the best of our knowledge, these are among the first X-ray structures of condensed multilayer oligomers.
As shown in X-ray structural analysis for 10, both the decked structure and the multilayer diastereochemistry is confirmed. For the latter, the sulfur heads of thiadiazole are arranged in antidirections alternatively. This indicates that multilayer polymers resulting from 3 have diastereochemistry of anti-anti or head-tail arrangements, i.e., thiophene rings of bridges are alternatively oriented. There are no other diastereoisomers formed during coupling reaction indicating that the layer diastereoselectivity is over 95% (essentially, only one diastereoisomer was generated). It is the first time to propose a concept of multilayer or layered diastereoselectivity and stereochemistry in this work.
We have been trying to isolate the key intermediates during the formation of the above oligomers, oligomer-type of compounds, and polymers, but we failed. However, during the similar synthesis of another three-layer oligomer using 4,9-dibromonaphtho[2,3-c][1,2,5]thiadiazole, we successfully obtained crystals of a Pd-ligand complex anchored with 4,9-dibromonaphtho[2,3-c][1,2,5]thiadiazole wing 11 (Figure 3(b)). The X-ray structural analysis revealed that the layers of two phenyl rings of phosphine ligands and the thiadiazole ring are arranged nearly in a parallel manner. This complex turned out to be very stable at room temperature in the air. It can be purified via column chromatography conveniently. As shown in Figure 3(b), both its clear solution (Figure 3(b), A) and condensed muddy mixture (Figure 3(b), B) display a shining brown color under UV irradiation.
Interestingly, the trimeric compound 10 in Figure 3(a) formed a pattern of regularly arranged loops on the surface of a vial when its solution was slowly evaporated at room temperature within 1-2 weeks (Figure 3(c), C). This phenomenon indicates that decked packing fashion occurs not only in intramolecular but also in an intermolecular manner. The planar structural arrangement would be the major reason forming these loops. In the meanwhile, another interesting phenomenon came out with a similar precursor, 4-bromo-7-(8-(7-(8-(pin)-naphthalen-1-yl)benzo[c][1,2,5]thiadiazol-4-yl)naphthalen-1-yl)benzo[c][1,2,5]thiadiazole, which formed feather types of leaves even in solution (Figure 3(c), D). To the best of our knowledge, these are the first chemical leaves which can be directly seen by naked eyes.
To demonstrate the activities of aggregation-induced emission (AIE)/aggregation-enhanced emission (AEE) quantitatively, the photoluminescence study of a monomer-type of trimer-partial 7 and the closely relevant polymer 1B was conducted (Figure 6). Dilute solution of 7 in THF shows relatively low fluorescence intensity at ~390 nm but exhibits gradual emission enhancement with increasing water fraction in the THF/water mixture. The X-ray structure offers a clue to the explanation that the rotation of phenyl rings mostly dissipates the excited-state energy in a low radiative manner. By restricting the intramolecular rotations (RIR) through aggregation formation by increasing the fraction of less soluble solvent (water in this case), the luminescence becomes much more intense.
The PL spectra of the multilayer polymer with the same skeleton 1B manifest AIE/AEE property as well. When the water fraction was increased to 30%, the solution of the columnar-shaped polymer was nearly saturated. The intermolecular aggregation largely suppresses the rotational motions of phenyl rings so that the exciton energy cannot be depleted by the radiation-less decay, thus making the molecule emissive jump almost 7-fold. However, the intramolecular arrangement becomes more regular and compacted, which leads to the through-space π-π stacking interaction. This energy consumption offsets partial AIE/AEE effect, which is revealed by slowly increasing PL intensity from fw=30% to 90%. This result coincides with the qualitative experiment shown in the inserted photo (Figure 6(b)). Based on the collected data, the fluorescence lifetimes τf for both 7 and 1B with different water fractions were fitted as shown in Table S26. The lifetime τf of trimer 7 clearly increases with higher water fractions from 45.66194 ns to 57.81773 ns, while there is no obvious trend for the polymer 1B.
2.3. Computational Investigations
Computational studies on the trimer 7 and the related pentamer (Figure 7) have been performed to analyze especially the character of the electronic transitions. Based on previous investigations on similar stacked systems (Figure 1(b)) [26] and other stacked PAHs such as pyrene dimers [27], calculations have been performed using two different types of methods: (i) time-dependent density functional theory (TD-DFT) using the ωB97XD range-separated functional and (ii) the ab initio second-order algebraic diagrammatic construction method (ADC(2)). More details about the methods used can be found in the SI, Section 5. Both methods give similar results. Thus, we will concentrate mostly on the presentation of the DFT data. All other results can be found in the SI as well.
The optimized geometry of trimer 7 in the ground state is displayed in Figure 7(a), A, for the gas phase using the ωB97XD/SVP method. Comparison of selected bond distances and angles with corresponding X-ray data shows good agreement. The overall zig-zag orientation of naphthalene and benzene rings (Figure 7(a), B) agrees well with the experimental structure also. The structural data computed with the same method in THF solution and by the SOS-MP2/SV(P) approach in the gas phase (Figure S30 and Figure S31) indicate only small effects induced by the solvent and by the different computational method, respectively. The computed structure of the pentamer is displayed in Figure 7(b). It shows a straightforward extension of the zig-zag arrangement of the trimer. The shorter of the two interring CC distances of 2.99 Å remains practically the same as in the trimer whereas the longer one is reduced from 4.07 Å (trimer) to 3.6-3.8 Å.
The calculated UV spectrum for the trimer is displayed in Figure 7(d) using the ωB97XD/SVP method in the gas phase. Corresponding spectra obtained with ωB97XD/SVP for THF solution (Figure S32) and ADC(2)/SV(P) for the gas phase (Figure S33) confirm these results. Quite good agreement with the experiment is observed in terms of the overall shape and the location of the band maxima of the two experimental band maxima (Figure S36); they are only shifted somewhat to higher energies. The analysis of the natural transition orbitals (NTOs) shows a combination of local excitations (LE) with significant contribution of charge transfer of ~0.5 e from the benzene ring to the naphthalene rings in case of S1. Only the central benzene ring is involved in the S1 transition. It should also be noted that especially the high-energy band is not dominated by one electron/hole pair transition alone. The spectrum of the pentamer resembles closely the trimer, as shown in Figure 7(e).
The omega matrix (Equation S1) displayed in Figure 8 for trimer 7 is based on the transition density from the ground state to S1 and is used to visualize the localization of the transition in the different parts of the molecule. Individual diagonal blocks indicate local excitations, and multiple diagonal contributions signal the exciton character. Off-diagonal blocks denote CT between respective blocks. Five segments have been defined: segments 1 to 3 represent the three benzene rings and segments 4 to 5 indicate the two naphthalene units. For more information on the construction of this matrix, see the SI. The two blue squares in the diagonal of the picture demonstrate excitonic character in the two naphthalene units. This is the dominant contribution. Another weaker diagonal block shows participation of the center benzene ring. As already discussed above, this benzene ring is also involved in CT with the naphthalene moieties. The other segments show vanishing contributions. The location of the excitation on the exterior naphthalene rings is of interest in view of the AIE phenomenon discussed above and on possible mutual intermolecular interactions. However, more investigations on aggregated systems have to be performed in order to allow more mechanistic insight into the consequences of the aggregation on the electronic transitions.
To discuss the fluorescence emission process, the geometry of the S1 state has been optimized since the emission process starts from S1 according to Kasha’s rule [45–47]. The S1 optimization does not change the overall shape of the trimer structure as a comparison between the structures in Figure 7(a) (ground state) and Figure 7(c) (S1 state) shows. The structural changes affect primarily the inner benzene ring, which follows a quinoid pattern, and the naphthalene rings. The CC bonds between the central benzene ring and the naphthalene rings are reduced somewhat as well. Changes in bond distances amount to a few hundredths of an Å and can be rationalized by the NTO excitation pattern displayed in Figure 7(d) for the S1 state. The optimized S1 structure of the trimer using the ADC(2)/SV(P) method follows a similar behavior. The S1 energy is decreased by 0.46 eV and 0.76 eV for the trimer using the ωB97XD/SVP and ADC(2)/SV(P) methods, respectively (compare vertical and adiabatic energies in Table 1). The Stokes shift computed as the difference of vertical absorption and emission is pronounced and amounts to 0.99 eV (85 nm) for ωB97XD/SVP and 1.15 eV (108 nm) for ADC(2)/SV(P). Table 1 shows also very good agreement of the ωB97XD calculations using the more flexible TZVP basis in comparison with the SVP results. The optimized structure for the S1 state of the pentamer using the ωB97XD/SVP method is shown in Figure S29. It follows the same structural changes as the trimer structure for S1 (Figure 7(c)). Also, the adiabatic transition energy and the Stokes shift (Table 1) are almost identical to the trimer values.
Last but not least, the polymerization of 4,7-bis(8-bromonaphthalen-1-yl)benzo[c][1,2,5]thiadiazole with 4,7-bis(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)benzo[c][1,2,5]thiadiazole under the above standard catalytic conditions has been proven to be successful. This system resulted in a chemical yield of 74% with Mn and Mw as 10,149 and 14,533, respectively (SI, Table S36). This strategy makes it possible to synthesize those multilayer 3D polymers with differentiated aromatic bridges instead of the same ones as shown in Scheme 1. In addition, another new two columns of multilayer 3D polymers have also been successfully obtained by using 2-(8-bromonaphthalen-1-yl)-4,4,5,5-tetramethyl-1,3,2-dioxaborolane as the sole monomer (SI, Figure S36).
3. Discussion
Less
In conclusion, we present here a new class of structurally condensed triple-column/multilayer 3D polymers and oligomers. The key element of this intramolecularly stacked arrangement is characterized by only one aromatic plane which exists between each pair of naphthalene holding skeletons, which could be deduced from X-ray structural analysis of distinct monomers. The results determined by GPC, 1H-NMR, and MALDI-TOF analysis are convincing, supporting that the new Suzuki-Miyaura catalytic systems are significant for this effective polymerization. Preliminary DLS and TEM results of the particle size study are shown in the supporting information. Both multilayer 3D monomers and polymers in this work exhibit fluorescence activity and aggregation-induced emission (AIE) property under specific wavelength irradiation. Computational work has been conducted on geometries for ground states of the trimer 7 (A) and the pentamer (B) and the S1 state of the trimer 7 (C). We found that the UV/vis spectrum predicted by the two computational methods used is well consistent with the experimental data. The S1 transitions can be characterized as a combination of mostly local character combined with nonnegligible CT contributions. The most interesting outcome of the theoretical analysis is the finding that the S1 transition is located mostly on the naphthalene units, which could indicate sensitivity of this transition to the aggregation process.
Funding
Less
  • Texas Tech University
  • Tianjin University
  • National Natural Science Foundation of China(91956110; 22071102)
  • Welch Foundation(D-1361)
References
Less
1
Skotheim T. A., Elsenbaumer R. L., and Reynolds J. R. Handbook of Conducting Polymers, CRC press, 1998
2
Hill D. J., Mio M. J., Prince R. B., Hughes T. S., and Moore J. S., “A field guide to foldamers,” Chemical Reviews, vol. 101, no. 12, pp. 3893–4012, 2001
3
Oh K., Jeong K.-S., and Moore J. S., “Folding-driven synthesis of oligomers,” Nature, vol. 414, no. 6866, pp. 889–893, 2001
4
Thomas S. W., Joly G. D., and Swager T. M., “Chemical sensors based on amplifying fluorescent conjugated polymers,” Chemical Reviews, vol. 107, no. 4, pp. 1339–1386, 2007
5
Varni A. J., Fortney A., Baker M. A., Worch J. C., Qiu Y., Yaron D., Bernhard S., Noonan K. J. T., and Kowalewski T., “Photostable helical polyfurans,” Journal of the American Chemical Society, vol. 141, no. 22, pp. 8858–8867, 2019
6
Gellman S. H., “Foldamers: a manifesto,” Accounts of Chemical Research, vol. 31, no. 4, pp. 173–180, 1998
7
Tour J. M., “Molecular electronics. Synthesis and testing of components,” Accounts of Chemical Research, vol. 33, no. 11, pp. 791–804, 2000
8
Tour J. M., “Conjugated macromolecules of precise length and constitution. Organic synthesis for the construction of nanoarchitectures,” Chemical Reviews, vol. 96, no. 1, pp. 537–554, 1996
9
Messier J., Prasad P., and Ulrich D. Nonlinear Optical Effects in Organic Polymers, Springer Science & Business Media, 2012
10
Nakano T., “Synthesis, structure and function of π-stacked polymers,” Polymer Journal, vol. 42, no. 2, pp. 103–123, 2010
11
Li J., Shen P., Zhao Z., and Tang B. Z., “Through-space conjugation: a thriving alternative for optoelectronic materials,” CCS Chemistry, vol. 1, no. 2, pp. 181–196, 2019
12
Niu G., Zheng X., Zhao Z., Zhang H., Wang J., He X., Chen Y., Shi X., Ma C., Kwok R. T. K., Lam J. W. Y., Sung H. H. Y., Williams I. D., Wong K. S., Wang P., and Tang B. Z., “Functionalized acrylonitriles with aggregation-induced emission: structure tuning by simple reaction-condition variation, efficient red emission, and two-photon bioimaging,” Journal of the American Chemical Society, vol. 141, no. 38, pp. 15111–15120, 2019
13
Xu L., Wang Z., Wang R., Wang L., He X., Jiang H., Tang H., Cao D., and Tang B. Z., “A conjugated polymeric supramolecular network with aggregation-induced emission enhancement: an efficient light-harvesting system with an ultrahigh antenna effect,” Angewandte Chemie, International Edition, vol. 59, no. 25, pp. 9908–9913, 2020
14
Gutzler R., and Perepichka D. F., “π-electron conjugation in two dimensions,” Journal of the American Chemical Society, vol. 135, no. 44, pp. 16585–16594, 2013
15
Hastings J. M., Pouget J. P., Shirane G., Heeger A. J., Miro N. D., and MacDiarmid A. G., “One-dimensional phonons and "phase-ordering" phase transition in Hg3−δAsF6,” Physical Review Letters, vol. 39, no. 23, pp. 1484–1487, 1977
16
Shirakawa H., Louis E. J., MacDiarmid A. G., Chiang C. K., and Heeger A. J., “Synthesis of electrically conducting organic polymers: halogen derivatives of polyacetylene, (CH)x,” Journal of the Chemical Society, Chemical Communications, vol. 16, pp. 578–580, 1977
17
Shirakawa H., McDiarmid A., and Heeger A., “Twenty-five years of conducting polymers,” Chemical Communications, vol. 2003, pp. 1–4, 2003
18
Mukhopadhyay S., Jagtap S. P., Coropceanu V., Brédas J. L., and Collard D. M., “π-stacked oligo (phenylene vinylene) s based on pseudo-geminal substituted [2.2] paracyclophanes: impact of interchain geometry and interactions on the electronic properties,” Angewandte Chemie, International Edition, vol. 51, no. 46, pp. 11629–11632, 2012
19
Spuling E., Sharma N., Samuel I. D., Zysman-Colman E., and Bräse S., “(Deep) blue through-space conjugated TADF emitters based on [2.2] paracyclophanes,” Chemical Communications, vol. 54, no. 67, pp. 9278–9281, 2018
20
Tsujimoto H., Ha D. G., Markopoulos G., Chae H. S., Baldo M. A., and Swager T. M., “Thermally activated delayed fluorescence and aggregation induced emission with through-space charge transfer,” Journal of the American Chemical Society, vol. 139, no. 13, pp. 4894–4900, 2017
21
Chen M., Bae Y. J., Mauck C. M., Mandal A., Young R. M., and Wasielewski M. R., “Singlet fission in covalent terrylenediimide dimers: probing the nature of the multiexciton state using femtosecond mid-infrared spectroscopy,” Journal of the American Chemical Society, vol. 140, no. 29, pp. 9184–9192, 2018
22
Morisaki Y., Murakami T., Sawamura T., and Chujo Y., “[2.2] Paracyclophane-layered polymers end-capped with fluorescence quenchers,” Macromolecules, vol. 42, no. 10, pp. 3656–3660, 2009
23
Saura P., and Kaila V. R., “Energetics and dynamics of proton-coupled electron transfer in the NADH/FMN site of respiratory complex I,” Journal of the American Chemical Society, vol. 141, no. 14, pp. 5710–5719, 2019
24
Wu G., Liu Y., Yang Z., Katakam N., Rouh H., Ahmed S., Unruh D., Surowiec K., and Li G., “Multilayer 3D chirality and its synthetic assembly,” Research, vol. 2019, article 6717104, –11, 2019
25
Wu G., Liu Y., Yang Z., Jiang T., Katakam N., Rouh H., Ma L., Tang Y., Ahmed S., Rahman A. U., Huang H., Unruh D., and Li G., “Enantioselective assembly of multi-layer 3D chirality,” National Science Review, vol. 7, no. 3, pp. 588–599, 2020
26
Liu Y., Wu G., Yang Z., Rouh H., Katakam N., Ahmed S., Unruh D., Cui Z., Lischka H., and Li G., “Multi-layer 3D chirality: new synthesis, AIE and computational studies,” Science China Chemistry, vol. 63, pp. 692–698, 2020
27
Shi B., Nachtigallová D., Aquino A. J. A., Machado F. B. C., and Lischka H., “Excited states and excitonic interactions in prototypic polycyclic aromatic hydrocarbon dimers as models for graphitic interactions in carbon dots,” Physical Chemistry Chemical Physics, vol. 21, no. 18, pp. 9077–9088, 2019
28
Hu X., Zhao X., He B., Zhao Z., Zheng Z., Zhang P., Shi X., Kwok R. T. K., Lam J. W. Y., Qin A., and Tang B. Z., “A simple approach to bioconjugation at diverse levels: metal-free click reactions of activated alkynes with native groups of biotargets without prefunctionalization,” Research, vol. 2018, article 3152870, –12, 2018
29
Huang G., Wen R., Wang Z., Li B. S., and Tang B. Z., “Novel chiral aggregation induced emission molecules: self-assembly, circularly polarized luminescence and copper (ii) ion detection,” Materials Chemistry Frontiers, vol. 2, no. 10, pp. 1884–1892, 2018
30
He B., Nie H., Chen L., Lou X., Hu R., Qin A., Zhao Z., and Tang B. Z., “High fluorescence efficiencies and large stokes shifts of folded fluorophores consisting of a pair of alkenyl-tethered, π-stacked oligo-p-phenylenes,” Organic Letters, vol. 17, no. 24, pp. 6174–6177, 2015
31
Chen L., Wang Y. H., He B., Nie H., Hu R., Huang F., Qin A., Zhou X. S., Zhao Z., and Tang B. Z., “Multichannel conductance of folded single-molecule wires aided by through-space conjugation,” Angewandte Chemie, International Edition, vol. 54, no. 14, pp. 4231–4235, 2015
32
Zhao Z., He B., Nie H., Chen B., Lu P., Qin A., and Tang B. Z., “Stereoselective synthesis of folded luminogens with arene–arene stacking interactions and aggregation-enhanced emission,” Chemical Communications, vol. 50, no. 9, pp. 1131–1133, 2014
33
Jagtap S. P., and Collard D. M., “Multitiered 2D π-stacked conjugated polymers based on pseudo-geminal disubstituted [2.2] paracyclophane,” Journal of the American Chemical Society, vol. 132, no. 35, pp. 12208–12209, 2010
34
Jagtap S. P., and Collard D. M., “2D multilayered π-stacked conjugated polymers based on a U-turn pseudo-geminal [2.2] paracyclophane scaffold,” Polymer Journal, vol. 3, pp. 463–471, 2012
35
Morisaki Y., Fernandes J. A., and Chujo Y., “Naphthalene-based oligothiophene-stacked polymers,” Polymer Journal, vol. 42, no. 12, pp. 928–934, 2010
36
Corey E. J., and Cheng Z. M. The Logic of Chemical Synthesis, Wiley, 1995
37
Miyaura N., and Suzuki A., “Palladium-catalyzed cross-coupling reactions of organoboron compounds,” Chemical Reviews, vol. 95, no. 7, pp. 2457–2483, 1995
38
Echeverri M., Ruiz C., Gámez-Valenzuela S., Alonso-Navarro M., Gutierrez-Puebla E., Serrano J. L., Ruiz Delgado M. C., and Gómez-Lor B., “Stimuli-responsive benzothiadiazole derivative as a dopant for rewritable polymer blends,” ACS Applied Materials & Interfaces, vol. 12, no. 9, pp. 10929–10937, 2020
39
Vyskočil Š., Meca L., Tišlerová I., Císařová I., Polášek M., Harutyunyan S. R., Belokon Y. N., Stead R. M. J., Farrugia L., Lockhart S. C., Mitchell W. L., and Kočovský P., “2, 8′-Disubstituted-1, 1′-binaphthyls: a new pattern in chiral ligands,” Chemistry - A European Journal, vol. 8, no. 20, pp. 4633–4648, 2002
40
Jurok R., Cibulka R., Dvořáková H., Hampl F., and Hodačová J., “Planar chiral flavinium salts–prospective catalysts for enantioselective sulfoxidation reactions,” European Journal of Organic Chemistry, vol. 2010, no. 27, pp. 5217–5224, 2010
41
Kumar A., Bawa S., Ganorkar K., Ghosh S. K., and Bandyopadhyay A., “Synthesis and characterization of acid-responsive luminescent Fe (II) metallopolymers of rigid and flexible backbone N-donor multidentate conjugated ligands,” Inorganic Chemistry, vol. 59, no. 3, pp. 1746–1757, 2020
42
Lee K.-S., and Lee J.-S., “Synthesis of highly fluorinated poly (arylene ether sulfide) for polymeric optical waveguides,” Chemistry of Materials, vol. 18, no. 18, pp. 4519–4525, 2006
43
Kerszulis J. A., Amb C. M., Dyer A. L., and Reynolds J. R., “Follow the yellow brick road: structural optimization of vibrant yellow-to-transmissive electrochromic conjugated polymers,” Macromolecules, vol. 47, no. 16, pp. 5462–5469, 2014
44
Morisaki Y., and Chujo Y., “Construction of benzene ring-layered polymers,” Tetrahedron Letters, vol. 46, no. 15, pp. 2533–2537, 2005
45
Kasha M., “Characterization of electronic transitions in complex molecules,” Discussions of the Faraday Society, vol. 9, pp. 14–19, 1950
46
Wang P. W., Liu Y. J., Devadoss C., Bharathi P., and Moore J. S., “Electroluminescent diodes from a single component emitting layer of dendritic macromolecules,” Advanced Materials, vol. 8, no. 3, pp. 237–241, 1996
47
Halim M. Adv Mater, JNG P., IDW S., and Burn P. L., Eds., Weinheim, Ger., vol. 11, 1999
Appendix
Less
Year 2021 volume 2021 Issue 2
PDF
90
48
Cite this Article
BibTeX
Article Info
doi: 10.34133/2021/3565791
  • Receive Date：2020-09-28
  • Online Date：2026-10-27
  • Published：2021-02-20
Article Data
Affiliations
History
  • Received：2020-09-28
  • Accepted：2020-12-21
Funding
Texas Tech University
Tianjin University
National Natural Science Foundation of China(91956110; 22071102)
Welch Foundation(D-1361)
Affiliations
    1Department of Chemistry and Biochemistry, Texas Tech University, Lubbock, Texas 79409-1061, USA
    2Institute of Chemistry and Biomedical Sciences, School of Chemistry and Chemical Engineering, Nanjing University, Nanjing 210093, China
    3School of Pharmaceutical Sciences and Technology, Tianjin University, Tianjin 300072, China
    4Department of Mechanical Engineering, Texas Tech University, Lubbock, TX 79409, USA
References
Share
https://castjournals.cast.org.cn/joweb/research/EN/10.34133/2021/3565791
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family		 属数
Number of
genus		 种数
Number of
species		 占总种数比例
Percentage of
total species (%)		 属
Genus		 种数
Number of
species		 占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT
Links
Articles
Latest Articles
Most Read
Collections
Updates
Events
News
Multimedia
About
About Us
Contact
No. 86 Xueyuan South Road, Haidian District, Beijing
100081
010-62662699(Operation and Technical Support)
qkjq@cast.org.cn

Copyright © 2025 China Association for Science and Technology. All rights reserved. For all open access content, the relevant licensing terms apply.
Sponsored by the Office of the Leading Group for Cybersecurity and Informatization of CAST, and supported by Science and Technology Review Publishing House