Home Journals Articles Updates About
CN
image
收藏切换
Catalyst-Free In Situ Carbon Nanotube Growth in Confined Space via High Temperature Gradient
收藏切换
PDF
Chaoji Chen1, Yanan Chen1, Shuze Zhu2, Jiaqi Dai1, Glenn Pastel1, Yonggang Yao1, Dapeng Liu1, Yanbin Wang1, 2, Jiayu Wan1, Teng Li2, Wei Luo1, 2, Liangbing Hu1
Research. Vol 2018 Article ID 1793784
Less
收藏切换
Research. Vol 2018 Article ID 1793784
• Research Article •
Catalyst-Free In Situ Carbon Nanotube Growth in Confined Space via High Temperature Gradient
Full
Chaoji Chen1, Yanan Chen1, Shuze Zhu2, Jiaqi Dai1, Glenn Pastel1, Yonggang Yao1, Dapeng Liu1, Yanbin Wang1, 2, Jiayu Wan1, Teng Li2, Wei Luo1, 2, Liangbing Hu1
Affiliations
  • 1Department of Materials Science and Engineering, University of Maryland, College Park, MD 20742, USA
  • 2Department of Mechanical Engineering, University of Maryland, College Park, MD 20742, USA
About Author:

Authors’ Contributions

Chaoji Chen, Yanan Chen, and Shuze Zhu contributed equally.

Published: 2018-12-20 doi: 10.1155/2018/1793784
Outline
收藏切换

Carbonaceous materials, such as graphite, carbon nanotubes (CNTs), and graphene, are in high demand for a broad range of applications, including batteries, capacitors, and composite materials. Studies on the transformation between different types of carbon, especially from abundant and low-cost carbon to high-end carbon allotropes, have received surging interest. Here, we report that, without a catalyst or an external carbon source, biomass-derived amorphous carbon and defective reduced graphene oxide (RGO) can be quickly transformed into CNTs in highly confined spaces by high temperature Joule heating. Combined with experimental measurements and molecular dynamics simulations, we propose that Joule heating induces a high local temperature at defect sites due to the corresponding high local resistance. The resultant temperature gradient in amorphous carbon or RGO drives the migration of carbon atoms and promotes the growth of CNTs without using a catalyst or external carbon source. Our findings on the growth of CNTs in confined spaces by fast high temperature Joule heating shed light on the controlled transition between different carbon allotropes, which can be extended to the growth of other high aspect ratio nanomaterials.

Chaoji Chen, Yanan Chen, Shuze Zhu, Jiaqi Dai, Glenn Pastel, Yonggang Yao, Dapeng Liu, Yanbin Wang, Jiayu Wan, Teng Li, Wei Luo, Liangbing Hu. Catalyst-Free In Situ Carbon Nanotube Growth in Confined Space via High Temperature Gradient[J]. Research, 2018 , 2018 (12) : 1793784 - . DOI: 10.1155/2018/1793784
Full Text
Less
1. 　Introduction
Less
Numerous types of carbonaceous materials, such as graphite, diamond, carbon fiber, and activated carbon, have been extensively investigated and commercialized for various applications, such as batteries, supercapacitors, and composite materials [1–4]. Recently, new carbon allotropes, including fullerene [5–7], carbon nanotubes (CNTs) [8–13], and grapheme [14–17], have been discovered, which offer attractive physicochemical properties. However, to date, production of these and other high-end carbon allotropes remains expensive. Typically, catalysts and external carbon sources are used to promote the scalable synthesis and preferential nucleation of low-dimensional carbon allotropes [18–22]. Given their identical chemical composition, the direct transformation of abundant and low-cost allotropes, such as amorphous carbon and graphite, to high-end CNTs and graphene, is highly desirable for commercial and industrial applications.
Many techniques have been established to transition between carbon allotropes. One of the most prototypical transformations is the preparation of C60 from graphite using laser ablation, electron beam evaporation, or arc-discharge methods [23]. During the arc-discharge method, graphite is sublimated at extremely high temperatures and then carbon molecules reform into C60. Another valuable allotropic transition is the production of expensive diamond from low-cost carbon allotropes from high temperature/pressure conditions or chemical vapor deposition [24–26]. Although transitions between various carbon allotropes have been extensively studied, there has yet to be a scalable method for the transformation of amorphous carbon or graphite to CNTs without the use of a catalyst.
Herein, we report a CNT synthesis method based on biomass-derived materials without the use of a catalyst or external carbon source. Rapid and scalable Joule heating can effectively generate ultrahigh temperatures compared to traditional heating processes (e.g., thermal radiation using an electric furnace), and in this manner we were able to transform abundant and low-cost wood-derived amorphous carbon and defective reduced graphene oxide (RGO) into CNTs in just 1 min without any catalyst or additional carbon source (Figure 1). Additionally, due to the existence of defective carbon sites or structures in carbonized wood (C-wood) and RGO, a temperature gradient occurs during Joule heating, which molecular dynamics (MD) simulations suggest plays a critical role in the migration of carbon atoms and the formation of CNTs. The confined environment is also important for CNT synthesis, as evidenced in the one-dimensional (1D) long channels of carbonized wood and layer-layer spacing of 2D RGO nanosheets. Due to the abundance and low cost of wood and graphite, this rapid and simple method can improve CNT production and other allotrope transitions for commercial applications.
2. 　Results
Less
2.1. 　 Morphology and Microstructure of Carbonized Wood
Wood exhibits anisotropic properties based on its growth direction [27–30]. In this work, we studied different orientations of wood for the CNT growth process. R-wood was obtained by radially slicing a wood brick (i.e., perpendicular to the growth direction), while a longitudinal slice was denoted as L-wood (Figure 2(a)). Typically, a large number of long and well-aligned vessels exist along the growth direction in wood for transporting water and minerals from the roots up to the leaves and other parts of the tree [31, 32]. Thus, numerous vessels were observed in both R-wood and L-wood with contrasting orientations (Figure S1). The wood pieces were carbonized at 1000°C under an argon atmosphere to yield carbonized radial wood (CR-wood) and carbonized longitudinal wood (CL-wood) (Figure 2(b)). The vessel structures in wood are well maintained after carbonization, as confirmed by scanning electron microscopy (SEM) images (Figures 2(c)–2(f)). X-ray diffraction (XRD) patterns in Figure S2a indicate the amorphous carbon nature of CR-wood and CL-wood, where two broad peaks at about 24° and 43° can be indexed to the (002) and (101) planes. This is in good agreement with other biomass-derived carbon materials obtained by carbonization at temperatures near 1000°C [33–35]. Figure S2b exhibits the Raman spectra of CR-wood and CL-wood, which present two bands at 1330 cm−1 (D-band) and 1595 cm−1 (G-band), indicative of sp3 and sp2 hybridized carbon atoms, respectively. The intensity ratio of the D-band over the G-band (ID/IG) is about 1.2, which like the XRD results indicates the amorphous structures of the materials. The high-resolution transmission electron microscopy (HRTEM) image in Figure S3 further confirms the amorphous structure of the samples, with small fragments of graphene layers.
2.2. 　 External Catalyst- and Carbon Source-Free Synthesis of CNTs in 1D Confined Space
To conduct the high temperature Joule heating process, a piece of carbonized wood with dimensions of 5 mm × 3 mm and a thickness of 500 μm was bridged between two glass slides and contacted by silver paste on copper tape (Figure 3(a)). As depicted in Figure 3(b), for the CL-wood, the vessels along the length direction are long and form a 1D confined space when the vessels are sealed by silver paste at the two ends. For the CR-wood specimen, the vessels were short, normal to the cross-section, and open to the environment. The as-assembled devices were transferred into an Ar-filled glove box for Joule heating. A direct current (DC) power input was applied so that the carbonized wood exhibited bright light, indicating a high temperature in the sample (Figure 3(c)). After loading with a power of ~32 W for 1 min, the DC input was removed, and the wood samples were collected. To more precisely identify the temperature of the Joule heated carbonized wood, we collected the emitted radiation spectra from 350 nm to 950 nm using an optical fiber (400 μm diameter, ocean optics) and fitted the spectra to gray body radiation curves (Figure 3(d)). The temperature (T) of the carbonized wood during Joule heating can be estimated according to Planck’s distribution function using a constant (“gray”) emissivity εgray:
(1)Bλλ,T=γεgray2hc2λ51ehc/λkBT-1,
in which h is Planck’s constant, c is the speed of light, λ is the wavelength, kB is the Boltzmann constant, and the scaling constant γ is introduced for fitting. According to the spectra, the highest temperatures of the CL-wood and CR-wood during Joule heating at 32 W were approximately the same, 2457 K ± 50 K [36–39].
SEM imaging shows that the overall morphology and structure of the carbonized wood is well maintained after the Joule heating process (Figure S4 and S5). When magnifying the CL-wood vessels, we observed large quantities of CNTs within the channels (Figures 4(a) and 4(b)). The SEM images show that the length of these CNTs can reach 20 μm, while the diameters range from 100 nm to 160 nm. More interestingly, these CNTs have a unique “stacked cup” structure and grow from the vessel wall with many joints (Figure 4(c) and Figure S6), which is similar to the previously reported vapor grown carbon nanofibers at a high temperature of 2800°C [40]. TEM and HRTEM images were taken to provide further insight. The inset in Figure 4(d) confirms the hollow structure of a typical CNT with a diameter of ~100 nm. HRTEM images also reveal the highly crystalline structure of the inner wall of the nanotubes with a d-spacing of 0.33 nm (Figure 4(d)), which is assigned to the interplanar spacing between the (002) planes of graphitic carbon. It is noteworthy that the outer wall of the nanotubes is amorphous (Figure 4(d) and Figure S7), which is significantly different from CNTs grown by other methods. We ascribe the amorphous structure of the outer wall to the unique temperature gradient-induced formation process of the CNT in the 1D confined space. Upon Joule heating, crystalline carbon in situ grows under a high temperature gradient, while during the cooling process, the temperature decreases and less crystalline carbon deposits on the outer surface of the as-grown CNT, forming an amorphous layer on the outer wall. We also notice that there were no CNTs observed in the CR-wood vessels after the same Joule heating process due to its open structure without space confinement (Figure S8). In addition, the CL-wood failed to grow CNT at a lower Joule heating temperature (e.g., 1500 K) owning to the relatively low temperature gradient. We anticipate that the as-synthesized carbonized wood-CNT composites may have a variety of potential applications in energy storage (e.g., supercapacitors, lithium-sulfur batteries, sodium-ion batteries, and flow batteries), electrocatalyst and photocatalyst, water treatment (e.g., solar desalination, heavy metal removal, and oil absorption), and microwave absorption by taking advantage of their unique multichanneled structure and CNT network.
2.3. 　 Formation Mechanism of CNTs in 1D Confined Space
To reveal the formation mechanism of CNTs in the CL-wood vessels without contributions from a catalyst or external carbon source, we hypothesized that the reaction process proceeds as illustrated in Figure 5(a). Due to the low temperature carbonization process (1000°C), a large number of defect sites exist in C-wood. When the C-wood is subjected to Joule heating, defect sites with higher resistance generate higher local temperatures than regions without defects, leading to temperature gradient [41]. The temperature gradient can cause carbon atoms to migrate from regions with higher local temperature towards regions with lower local temperature (Figure 5(a)). On the other hand, carbon atoms located at defect sites are involved in the carbon sublimation process due to the unstable and high temperature environment. When CL-wood was used, these carbon atoms can be confined in the long, 1D confined vessels. As a result, these atoms continue to grow as CNTs. In contrast, when there is no confined space, as in the CR-wood, carbon atoms can readily escape from the open ends, thus CNTs are not formed during the Joule heating process.
To further confirm this carbon transformation mechanism, we carried out MD simulations (see more simulation details in the Supporting Information and Figure S9), in which we used the large-scale atomic/molecular massively parallel simulator (LAMMPS) [42] and the REAXFF potential [42, 43]. We designed the cylindrical volume perpendicular to the amorphous carbon vessel wall inside the simulation box as the low temperature region, and everywhere else was made the high temperature region. In order to highlight the role of the temperature gradient in an expedited migration process, 3000 K was assigned to the high temperature region and 300 K to the low temperature region. Figures 5(b)–5(g) shows the evolution of configuration, in which a typical 1D CNT structure was formed.
2.4. 　 Extending the External Catalyst- and Carbon Source-Free Synthesis of CNTs from 1D to 2D Confined Space
We can extend the CNT growth from wood with 1D long/closed vessels to two-dimensional (2D) materials, with the additional condition that the 2D nanosheets are relatively impenetrable to gas species [44, 45]. To test this proposed growth mechanism in between confined carbon layers, we made RGO using a modified Hummers’ method [46] (Figure 6(a)). After 1 min Joule heating, the surface of the RGO sample was carefully peeled off and characterized by SEM. As shown in Figures 6(b)–6(d), it is clear that numerous CNTs are present in between the RGO layers, even without the use of any catalysts or external carbon sources. It is well known that RGO made by Hummers’ method with low temperature reduction has abundant defect sites [47, 48]. We believe that a temperature gradient occurs on the RGO nanosheets during the Joule heating process and leads to carbon atom migration and CNT formation, in a similar fashion as in CL-wood. In comparison to CNTs obtained in vessels of C-wood, CNTs grown in between RGO layers are shorter, which can be attributed to the limited space in between the 2D RGO nanosheets relative to the long 1D vessels of the CL-wood.
3. 　Discussion
Less
In brief, we have demonstrated for the first time that CNTs can be directly grown in both 1D confined channels of carbonized wood and 2D confined spaces of RGO by a fast Joule heating process without any catalysts. In contrast to other CNT growth methods, no external carbon source is needed because the confined materials (wood-based carbon or RGO) are laden with defects and serve as ideal carbon sources. MD simulations show that transformation from amorphous carbon and RGO to CNTs depends on the temperature gradient, which results from the high resistance of defect sites during Joule heating. Carbon atoms migrate from high temperature regions towards lower temperature regions and grow into CNTs in confined spaces. Further analysis can shed light on the transformation mechanisms between carbon allotropes. Our findings hold promise for the growth of a range of high aspect ratio nanomaterials, such as metal nanowires and other nanostructures, at high temperatures in confined spaces.
4. 　Materials and Methods
Less
4.1. 　 Preparation of Carbonized Wood and RGO Film
In this study, wood blocks (American basswood) were and purchased from Walnut hollow Inc. and used as the starting material. The wood block was cut in two directions (radial and longitudinal, as schematically shown in Figure 2(a)). The obtained wood slices were then transferred into a tube furnace and heated at 260°C for 8 h in air followed by carbonization at 1000°C under argon for 2 h.
A graphene oxide (GO) dispersion was prepared using a modified Hummer method [1]. Freestanding GO films were obtained by vacuum filtration using the as-prepared GO dispersion. Before Joule heating, freestanding GO films were reduced in a tube furnace at 500°C in argon for 30 min to produce the freestanding reduced graphene oxide (RGO) films.
4.2. 　 Joule Heating Treatment
To conduct the Joule heating treatment, the setup shown in Figure 3(a) was used, in which carbonized wood or freestanding RGO film was bridged between two glass slides and contacted by silver paste on copper tape. The setup was then transferred into an argon-filled glove box. A direct current (DC) power input was applied using a power transformer (Volteq HY6020EX). The emitted light during Joule heating was collected using an optical fiber (400 μm diameter) and connected to a spectrometer (ocean optics). The measurement system was calibrated by a National Institute of Standards and Technology (NIST)-traceable light source.
4.3. 　 Characterization
XRD patterns were collected using a D8 Advanced (Bruker AXS, WI, USA). Raman spectra were recorded by a Horiba Jobin-Yvon system with a laser wavelength of 532 nm. The morphology of the samples was examined by SEM (Hitachi SU-70 field emission scanning electron microscopy) and TEM (JEM 2100 FE-TEM).
Funding
Less
  • Maryland NanoCenter and its AIMLab
References
Less
1
Dresselhaus M. S., and Dresselhaus G., “Intercalation compounds of graphite,” Advances in Physics, vol. 30, no. 2, pp. 139–326, 1981
2
Dahn J. R., Zheng T., Liu Y., and Xue J. S., “Mechanisms for lithium insertion in carbonaceous materials,” Science, vol. 270, no. 5236, pp. 590–593, 1995
3
Simon P., and Gogotsi Y., “Materials for electrochemical capacitors,” Nature Materials, vol. 7, no. 11, pp. 845–854, 2008
4
Lekawa-Raus A., Patmore J., Kurzepa L., Bulmer J., and Koziol K., “Electrical properties of carbon nanotube based fibers and their future use in electrical wiring,” Advanced Functional Materials, vol. 24, no. 24, pp. 3661–3682, 2014
5
Smalley R. E., “Discovering the fullerenes,” Reviews of Modern Physics, vol. 69, no. 3, pp. 723–730, 1997
6
Lu X., Feng L., Akasaka T., and Nagase S., “Current status and future developments of endohedral metallofullerenes,” Chemical Society Reviews, vol. 41, no. 23, pp. 7723–7760, 2012
7
Lu X., Slanina Z., Akasaka T., Tsuchiya T., Mizorogi N., and Nagase S., “Yb@C2n (n = 40, 41, 42): New fullerene allotropes with unexplored electrochemical properties,” Journal of the American Chemical Society, vol. 132, no. 16, pp. 5896–5905, 2010
8
Iijima S., and Ichihashi T., “Single-shell carbon nanotubes of 1-nm diameter,” Nature, vol. 363, no. 6430, pp. 603–605, 1993
9
Zhou C., Kong J., Yenilmez E., and Dai H., “Modulated chemical doping of individual carbon nanotubes,” Science, vol. 290, no. 5496, pp. 1552–1555, 2000
10
Pint C. L., Pheasant S. T., Pasquali M., Coulter K. E., Schmidt H. K., and Hauge R. H., “Synthesis of high aspect-ratio carbon nanotube ‘flying carpets’ from nanostructured flake substrates,” Nano Letters, vol. 8, no. 7, pp. 1879–1883, 2008
11
Gong K., Du F., Xia Z., Durstock M., and Dai L., “Nitrogen-doped carbon nanotube arrays with high electrocatalytic activity for oxygen reduction,” Science, vol. 323, no. 5915, pp. 760–764, 2009
12
Yu D., Zhang Q., and Dai L., “Highly efficient metal-free growth of nitrogen-doped single-walled carbon nanotubes on plasma-etched substrates for oxygen reduction,” Journal of the American Chemical Society, vol. 132, no. 43, pp. 15127–15129, 2010
13
Kilina S., and Tretiak S., “Excitonic and vibrational properties of single-walled semiconducting carbon nanotubes,” Advanced Functional Materials, vol. 17, no. 17, pp. 3405–3420, 2007
14
Novoselov K. S., Geim A. K., Morozov S. V., Jiang D., Zhang Y., Dubonos S. V., Grigorieva I. V., and Firsov A. A., “Electric field in atomically thin carbon films,” Science, vol. 306, no. 5696, pp. 666–669, 2004
15
de Arco L. G., Zhang Y., Schlenker C. W., Ryu K., Thompson M. E., and Zhou C., “Continuous, highly flexible, and transparent graphene films by chemical vapor deposition for organic photovoltaics,” ACS Nano, vol. 4, no. 5, pp. 2865–2873, 2010
16
Zhang Y., Zhang L., and Zhou C., “Review of chemical vapor deposition of graphene and related applications,” Accounts of Chemical Research, vol. 46, no. 10, pp. 2329–2339, 2013
17
Coleman J. N., “Liquid-phase exfoliation of nanotubes and graphene,” Advanced Functional Materials, vol. 19, no. 23, pp. 3680–3695, 2009
18
Dai H., “Carbon nanotubes: synthesis, integration, and properties,” Accounts of Chemical Research, vol. 35, no. 12, pp. 1035–1044, 2002
19
Li D., Müller M. B., Gilje S., Kaner R. B., and Wallace G. G., “Processable aqueous dispersions of graphene nanosheets,” Nature Nanotechnology, vol. 3, no. 2, pp. 101–105, 2008
20
Kong J., Soh H. T., Cassell A. M., Quate C. F., and Dai H., “Synthesis of individual single-walled carbon nanotubes on patterned silicon wafers,” Nature, vol. 395, no. 6705, pp. 878–881, 1998
21
Licht S., Douglas A., Ren J., Carter R., Lefler M., and Pint C. L., “Carbon nanotubes produced from ambient carbon dioxide for environmentally sustainable lithium-ion and sodium-ion battery anodes,” ACS Central Science, vol. 2, no. 3, pp. 162–168, 2016
22
Gui X., Wei J., Wang K., Cao A., Zhu H., Jia Y., Shu Q., and Wu D., “Carbon nanotube sponges,” Advanced Materials, vol. 22, no. 5, pp. 617–621, 2010
23
Krätschmer W., Lamb L. D., Fostiropoulos K., and Huffman D. R., “Solid C60: a new form of carbon,” Nature, vol. 347, no. 6291, pp. 354–358, 1990
24
Khaliullin R. Z., Eshet H., Kühne T. D., Behler J., and Parrinello M., “Nucleation mechanism for the direct graphite-to-diamond phase transition,” Nature Materials, vol. 10, no. 9, pp. 693–697, 2011
25
Kertesz M., and Hoffmann R., “The graphite-to-diamond transformation,” Journal of Solid State Chemistry, vol. 54, no. 3, pp. 313–319, 1984
26
Yan C.-S., Vohra Y. K., Mao H.-K., and Hemley R. J., “Very high growth rate chemical vapor deposition of single-crystal diamond,” Proceedings of the National Acadamy of Sciences of the United States of America, vol. 99, no. 20, pp. 12523–12525, 2002
27
Zhu J. Y., and Zhuang X. S., “Conceptual net energy output for biofuel production from lignocellulosic biomass through biorefining,” Progress in Energy and Combustion Science, vol. 38, no. 4, pp. 583–598, 2012
28
Song J., Chen C., Zhu S., Zhu M., Dai J., Ray U., Li Y., Kuang Y., Li Y., Quispe N., Yao Y., Gong A., Leiste U. H., Bruck H. A., Zhu J. Y., Vellore A., Li H., Minus M. L., Jia Z., Martini A., Li T., and Hu L., “Processing bulk natural wood into a high-performance structural material,” Nature, vol. 554, no. 7691, pp. 224–228, 2018
29
Chen C., Zhang Y., Li Y., Dai J., Song J., Yao Y., Gong Y., Kierzewski I., Xie J., and Hu L., “All-wood, low tortuosity, aqueous, biodegradable supercapacitors with ultra-high capacitance,” Energy & Environmental Science, vol. 10, no. 2, pp. 538–545, 2017
30
Chen C., Song J., Zhu S., Li Y., Kuang Y., Wan J., Kirsch D., Xu L., Wang Y., Gao T., Wang Y., Huang H., Gan W., Gong A., Li T., Xie J., and Hu L., “Scalable and sustainable approach toward highly compressible, anisotropic, lamellar carbon sponge,” Chem, vol. 4, no. 3, pp. 544–554, 2018
31
Zhu H., Luo W., Ciesielski P. N., Fang Z., Zhu J. Y., Henriksson G., Himmel M. E., and Hu L., “Wood-derived materials for green electronics, biological devices, and energy applications,” Chemical Reviews, vol. 116, no. 16, pp. 9305–9374, 2016
32
Carpita N. C., and Gibeaut D. M., “Structural models of primary cell walls in flowering plants: Consistency of molecular structure with the physical properties of the walls during growth,” The Plant Journal, vol. 3, no. 1, pp. 1–30, 1993
33
Ji X., Lee K. T., and Nazar L. F., “A highly ordered nanostructured carbon-sulphur cathode for lithium-sulphur batteries,” Nature Materials, vol. 8, no. 6, pp. 500–506, 2009
34
Wang H., Xu Z., Kohandehghan A., Li Z., Cui K., Tan X., Stephenson T. J., King'Ondu C. K., Holt C. M. B., Olsen B. C., Tak J. K., Harfield D., Anyia A. O., and Mitlin D., “Interconnected carbon nanosheets derived from hemp for ultrafast supercapacitors with high energy,” ACS Nano, vol. 7, no. 6, pp. 5131–5141, 2013
35
Li Y., Hu Y.-S., Titirici M.-M., Chen L., and Huang X., “Hard carbon microtubes made from renewable cotton as high-performance anode material for sodium-ion batteries,” Advanced Energy Materials, vol. 6, no. 18, 2016
36
Bao W., Pickel A. D., Zhang Q., Chen Y., Yao Y., Wan J., Fu K., Wang Y., Dai J., Zhu H., Drew D., Fuhrer M., Dames C., and Hu L., “Flexible, high temperature, planar lighting with large scale printable nanocarbon paper,” Advanced Materials, pp. 4684–4691, 2016
37
Yao Y., Fu K. K., Zhu S., Dai J., Wang Y., Pastel G., Chen Y., Li T., Wang C., Li T., and Hu L., “Carbon welding by ultrafast joule heating,” Nano Letters, vol. 16, no. 11, pp. 7282–7289, 2016
38
Freitag M., Chiu H.-Y., Steiner M., Perebeinos V., and Avouris P., “Thermal infrared emission from biased graphene,” Nature Nanotechnology, vol. 5, no. 7, pp. 497–501, 2010
39
Kim Y. D., Kim H., Cho Y., Ryoo J. H., Park C.-H., Kim P., Kim Y. S., Lee S., Li Y., Park S.-N., Shim Yoo Y., Yoon D., Dorgan V. E., Pop E., Heinz T. F., Hone J., Chun S.-H., Cheong H., Lee S. W., Bae M.-H., and Park Y. D., “Bright visible light emission from graphene,” Nature Nanotechnology, vol. 10, no. 8, pp. 676–681, 2015
40
Tibbetts G. G., Lake M. L., Strong K. L., and Rice B. P., “A review of the fabrication and properties of vapor-grown carbon nanofiber/polymer composites,” Composites Science and Technology, vol. 67, no. 7-8, pp. 1709–1718, 2007
41
Sun C.-F., Glaz B. J., Okada M., Baker E., Cheng X.-Y., Karna S. P., and Wang Y., “Blocking oxidation failures of carbon nanotubes through selective protection of defects,” Advanced Materials, pp. 6672–6679, 2016
42
Plimpton S., “Fast parallel algorithms for short-range molecular dynamics,” Journal of Computational Physics, vol. 117, no. 1, pp. 1–19, 1995
43
Chenoweth K., Van Duin A. C. T., and Goddard III W. A., “ReaxFF reactive force field for molecular dynamics simulations of hydrocarbon oxidation,” The Journal of Physical Chemistry A, vol. 112, no. 5, pp. 1040–1053, 2008
44
Kim J., Cote L. J., and Huang J., “Two dimensional soft material: new faces of graphene oxide,” Accounts of Chemical Research, vol. 45, no. 8, pp. 1356–1364, 2012
45
Berry V., “Impermeability of graphene and its applications,” Carbon, vol. 62, pp. 1–10, 2013
46
Marcano D. C., Kosynkin D. V., Berlin J. M., Sinitskii A., Sun Z., Slesarev A., Alemany L. B., Lu W., and Tour J. M., “Improved synthesis of graphene oxide,” ACS Nano, vol. 4, no. 8, pp. 4806–4814, 2010
47
Dreyer D. R., Park S., Bielawski C. W., and Ruoff R. S., “The chemistry of graphene oxide,” Chemical Society Reviews, vol. 39, no. 1, pp. 228–240, 2010
48
Loh K. P., Bao Q., Eda G., and Chhowalla M., “Graphene oxide as a chemically tunable platform for optical applications,” Nature Chemistry, vol. 2, no. 12, pp. 1015–1024, 2010
Appendix
Less
Year 2018 volume 2018 Issue 12
PDF
55
32
Cite this Article
BibTeX
Article Info
doi: 10.1155/2018/1793784
  • Receive Date：2018-08-31
  • Online Date：2026-10-27
  • Published：2018-12-20
Article Data
Affiliations
History
  • Received：2018-08-31
  • Accepted：2018-10-22
Funding
Maryland NanoCenter and its AIMLab
Affiliations
    1Department of Materials Science and Engineering, University of Maryland, College Park, MD 20742, USA
    2Department of Mechanical Engineering, University of Maryland, College Park, MD 20742, USA
References
Share
https://castjournals.cast.org.cn/joweb/research/EN/10.1155/2018/1793784
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family		 属数
Number of
genus		 种数
Number of
species		 占总种数比例
Percentage of
total species (%)		 属
Genus		 种数
Number of
species		 占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT
Links
Articles
Latest Articles
Most Read
Collections
Updates
Events
News
Multimedia
About
About Us
Contact
No. 86 Xueyuan South Road, Haidian District, Beijing
100081
010-62662699(Operation and Technical Support)
qkjq@cast.org.cn

Copyright © 2025 China Association for Science and Technology. All rights reserved. For all open access content, the relevant licensing terms apply.
Sponsored by the Office of the Leading Group for Cybersecurity and Informatization of CAST, and supported by Science and Technology Review Publishing House