收藏切换
Bee Sting-Inspired Inflammation-Responsive Microneedles for Periodontal Disease Treatment
收藏切换
PDF
Chuanhui Song1, Xiaoxuan Zhang2, Minhui Lu2, Yuanjin Zhao1, 2, 3, *
Research. Vol 6 Article ID 0119
Less
收藏切换
Research. Vol 6 Article ID 0119
• Research Article •
Bee Sting-Inspired Inflammation-Responsive Microneedles for Periodontal Disease Treatment
Full
Chuanhui Song1, Xiaoxuan Zhang2, Minhui Lu2, Yuanjin Zhao1, 2, 3, *
Affiliations
  • 1Department of Rheumatology and Immunology, Institute of Translational Medicine, The Affiliated Drum Tower Hospital of Nanjing University Medical School, Nanjing 210002, China.
  • 2State Key Laboratory of Bioelectronics, School of Biological Science and Medical Engineering, Southeast University, Nanjing 210096, China.
  • 3Chemistry and Biomedicine Innovation Center, Nanjing University, Nanjing 210023, China.
Published: 2023-04-20 doi: 10.34133/research.0119
Outline
收藏切换

Periodontal lesions are common and frustrating diseases that impact life quality. Efforts in this aspect aim at developing local drug delivery systems with better efficacy and less toxicity. Herein, inspired by the sting separation behavior of bees, we conduct novel reactive oxygen species (ROS)-responsive detachable microneedles (MNs) that carry antibiotic metronidazole (Met) for controllable periodontal drug delivery and periodontitis treatment. Benefiting from the needle-base separation ability, such MNs can penetrate through the healthy gingival to reach the gingival sulcus's bottom while offering minimal impact to oral function. Besides, as the drug-encapsulated cores were protected by poly (lactic-co-glycolic acid) (PLGA) shells in MNs, the surrounding normal gingival tissue is not affected by Met, resulting in excellent local biosafety. Additionally, with the ROS-responsive PLGA-thioketal-polyethylene glycol MN tips, they can be unlocked to release Met directly around the pathogen under the high ROS in the periodontitis sulcus, bringing about improved therapeutic effects. Based on these characteristics, the proposed bioinspired MNs show good therapeutic results in treating a rat model with periodontitis, implying their potential in periodontal disease.

Chuanhui Song, Xiaoxuan Zhang, Minhui Lu, Yuanjin Zhao. Bee Sting-Inspired Inflammation-Responsive Microneedles for Periodontal Disease Treatment[J]. Research, 2023 , 6 (4) : 0119 - . DOI: 10.34133/research.0119
Periodontitis is a common oral disease worldwide that brings great trouble to human health and life, being considered the leading cause of tooth loss in adults [1,2]. Generally, periodontitis is associated with anaerobic pathogens, among which the Porphyromonas gingivalis (P.g.) and Fusobacterium nucleatum (F.n.) are the primary culprits [3]. To defeat such a bacteria-induced plaque, antibiotic therapy is widely used, such as chlorhexidine [4], ornidazole [5], and metronidazole (Met) [6]. Among them, Met is a regular medication that deals with anaerobic bacteria and plays a role in periodontitis treatment [7]. Despite the demonstrated medical efficacy, systemic administration of Met may cause severe gastrointestinal adverse effects and allergy [8–10]. In addition, Met gargle used in clinics has poor drug retardation capacity and uncontrollable release, leading to drug overuse and unsatisfied therapeutic effects [11,12]. Thus, local drug delivery strategies toward periodontal diseases with high retention effects and inflammation responses are still highly desired.
Here, inspired by the sting separation behavior of bees, we propose detachable microneedles (MNs) with Met loading and inflammation-responsive ability to eliminate anaerobic bacteria and treat periodontal disease (Fig. 1). MNs, an emerging drug delivery technique, can penetrate through the skin in a painless, minimally invasive, and noninfective manner [13–20]. Besides, the solid matrix provided by the MNs has high drug loading potential and can be imparted with responsive release capacity after suitable modification [21–23]. Benefitting from these properties, drug delivery of MNs to diverse body parts, including the skin [24–26], heart [27–29], uterus [21,30], and blood vessels [31–33], has been widely explored. Although many achievements have been made [1], the application of MNs in oral disease is still rare, and how to keep them in the oral cavity for a long term without impacting normal oral function remains to be investigated. In addition, the drug release profiles of MNs, especially the responsive release, are waiting for further improvements.
In this paper, getting inspiration from the separable sting bees, we present the Met-loaded, reactive oxygen species (ROS)-responsive and detachable MNs to deliver drugs into the gingival sulcus for combating anaerobic bacteria to treat periodontitis. Poly (vinyl alcohol) (PVA) was chosen as the back of the MNs because it could promptly dissolve and detach from the tissue-penetrated MNs [13], thus reducing the impact on normal oral function. PLGA (poly (lactic-co-glycolic acid)) with the features of slow biodegradation and nontoxic ingredients was chosen as the shell of MNs to protect the inner drug core and avoid leakage of drugs to normal gingival tissue. Additionally, the ROS-responsive polymer (PLGA-thioketal-polyethylene glycol [PLGA-TK-PEG]) was employed to serve as MN tips, thus the MNs could respond to the high ROS condition among the infected gingival sulcus and directly release the Met into the gingival sulcus through the ROS-unlocked tips to conquer the P.g. and other pathogens. Based on these specialties, it was found that the bioinspired local drug delivery system showed an excellent therapeutic effect on periodontitis with wonderful biosafety in the rat model, indicating that the proposed MNs may offer a promising choice in periodontitis therapy and find new applications in other oral diseases.
To fabricate the ROS-responsive MNs, we used 2-step casting to make the materials of each MN part different [34]. The thioketal bond in PLGA-TK-PEG could respond to ROS to achieve fast bond breaking (Fig. S1). ROS-responsive PLGA-TK-PEG was first added to negative MN molds, and the molds with solution were vacuumed to make ROS-responsive materials fill the end (Fig. 2A). The excess liquid was then removed with a pipette, and the solvent was evaporated to solidify the tips. After being cured completely, the PLGA solution was added gently to form the outer shell. Further, the solution was spiked with fluorescent nanoparticles and imaged using confocal microscopy to investigate the formation of tips. Figure 2B and C showed that the ends were green while the shells were red. After the solidification by solvent evaporation, we filled the body with Met in PLGA solution. We removed the excess material, after which the PVA solution was added as the base of the patch (Fig. 2D and E). The ROS could break the TK bonds based on redox reaction to act as the key to trigger drug release. To test the ROS-responsive property, the MNs were incubated with 1% H2O2 for 24 h, and the scanning electron microscopy showed that the tips were porous, indicating the ROS-responsive ability of MNs (Fig. 2F and G).
Compared with skin, the oral mucosa is softer to penetrate, which makes MNs convenient to apply. To test the mechanical specialties of the prepared MNs, the maximum applied forces of vertical direction were assessed using a manometer, during which the pressure could be recorded according to the move distance (Fig. S2A). The result showed that the mechanical strength of PLGA MNs was enhanced, consistent with the increase of PLGA concentration (Fig. S2B and C). Notably, the ROS-responsive mass had minimal effect on the mechanical property, owing to the comparability of PLGA and PLGA-TK-PEG. As the MNs with 15% PLGA could stand the compressive force of more than 0.3 N (the force to penetrate the skin) [13], such a concentration was decided to conduct the following in vivo tests.
During the in vivo experiments, an MN patch was applied to the oral cavity of an anesthetized rat. In rat oral cavity, the prepared MNs could easily penetrate the gingival and enter the gingival sulcus (Fig. 2H and I). In addition, the detachable base could be removed after application in the oral cavity leaving the drug-load body and ROS-responsive tip in the gingival, owing to the rapid dissolution of PVA when it encounters saliva (Fig. S3A and B). Furthermore, the buccal mucosa and tough could also be penetrated, indicating the wide application potential of MNs in oral disease (Fig. S3C and D). The safety of MN application should also be considered. For this purpose, the gingival tissue was collected after MN application. The hematoxylin and eosin (H&E) staining illustrated that the tissue could heal after MN removal, and a few inflammatory cell infiltrations were found in the tissue (Fig. 2J and K). All these data showed that MNs could be an ideal way to treat periodontal disease, as the periodontal-disease-causing bacteria accumulate in the bottom of the gingival sulcus. Notably, in the buccal mucosa and tongue body, the MNs also had excellent adhesive ability, indicating the potential of MNs for more oral application.
As degradation is also a critical index of oral implant materials, we tested the degradation rate of MNs in artificial saliva. We detected the weight loss of MNs in artificial saliva with or without H2O2, and the results showed that although the weight loss was faster with H2O2 in the initial 8 h, the differences between each group were no longer obviously distinguishable thereafter (Fig. 3A). The ROS-induced quick degradation might contribute to the fast weight change, enabling the MNs to act as the ROS-responsive unlocking agent to release the inner drug. To test the drug release, we took fluorescein isothiocyanate-bovine serum albumin (FITC-BSA) as a mimic agent embedded in the core of MNs. After immersion in saliva for the selected time, the FITC-BSA in the supernatant was sampled and detected. The results showed that there was more drug release when H2O2 exited, indicating that the ROS unlocking ability could enhance drug release (Fig. 3B).
P.g. is the leading cause of periodontitis, so we tested the antibacterial toward P.g. The live/dead staining showed that the group after MN treatment exhibited minimal living bacteria compared with the control group without MNs (Fig. 3C and D). Besides, the F.n. is another pathogenic leading to periodontitis. We took the bacteria cocultured with MNs for 24 h to test the biofilm formation for evaluating the antibacterial effects of MNs toward pathogens. The biofilm staining showed that the drugs released from MNs could inhibit the biofilm from the dual bacteria (Fig. 3E and F and Fig. S4). Also, the fluorescence in situ hybridization (FISH) [35], with the ability to observe different bacteria, showed that both F.n. and P.g. had minimal fluorescence after MN treatment, which was consistent with the biofilm staining (Fig. 3G and Fig. S5).
As the MN patch is directed to the diseased sites, the biocompatibility of the patch is crucially important during the treatment period. Besides the in vivo test, the fibroblast (3T3), oral mucosa cells (HaCaT), and human umbilical vein endothelial cells (HUVECs) were taken as regular cell lines to incubate with MNs for cell viability assessments. It was demonstrated by the calcein-acetoxymethyl staining that all the cells grew gradually and well whether they were cultured with MNs or not (Fig. 4A to C and Fig. S6). The Cell Counting Kit-8 (CCK-8) test further quantitatively indicated the excellent biocompatibility of MNs and the loaded antibiotic (Fig. 4D), suggesting reasonable design of our study, as the Met is effective toward the anaerobic bacteria. All those data showed that the MNs owned excellent antibacterial ability, which could be applied to oral disease and other infections.
The MN patch for periodontal treatment is rare but efficient, as the oral mucosa is easy to penetrate and adhere to. To verify the therapeutic effect of MNs, the periodontitis model was established in Sprague Dawley rats with tying silk thread. After 3 weeks of treatment, the micro-computed tomography (micro-CT) was used to detect the periodontal tissue. As in Fig. 5A, the MN treatment group showed minimal bone loss, while the empty MNs showed no noticeable change compared with the control group. The golden index to describe the periodontal condition was the length between the cementoenamel junction (CEJ) and alveolar bone crest (ABC) in the local jawbone. The measurement indicates that the treatment gained an excellent therapeutic effect, as the CEJ-ABC recovered to normal after treatment (Fig. 5B), attributing to the antibacterial effect on erosion of local pathogens, diminishing inflammation, and facilitating bone repair. Also, the relative inflammatory cytokines demonstrated the relief of local tissue since the tumor necrosis factor-α (TNF-α) and interleukin-6 (IL-6) were minor in the Met@MN group, compared with the control and empty MN groups through immunohistochemical (IHC) staining (Fig. 5C to F). The macrophage-relative cytokines also indicated the regional microenvironment trend to a recovery statement, the M2 macrophage-specific biomarker Arginase 1 (Arg-1) had a substantial elevation, and the M1 macrophage biomarker inducible nitric oxide synthase (iNOS) dramatically decreased after MN treatment (Fig. 5G to J). All data above proved that the bio-inspired MNs could act as an effective sterilization strategy to deal with periodontitis.
It is crucial to consider the biosafety of biomaterials, especially implanted biomaterials. To check the regional tissue after MN application, we collected the regional draining lymph node and the adjacent tissue, upper lip, and lower lip to check the status after application. The H&E staining results exhibited no noticeable pathological change after MN insertion with or without the drug (Fig. S7), indicating the excellent biocompatibility of the MNs. The inserted gingival also recovered to the normal state, which made it hard to distinguish visually or pathologically from the normal tissue (Fig. 2K). Furthermore, the major organs also showed no pathological change after the therapy period (Fig. S8). Also, the weights of rats during the whole period gradually increased and had no marked difference between groups (Fig. S9). All those data suggest the excellent biosafety of the MNs.
In summary, we have presented a bee-inspired Met-loaded separable MN that could ROS-responsively release drugs into the gingival sulcus to treat periodontists. To ensure proper oral function, drug-laden microcarriers like nanoplatform [36,37], spun scaffolds [38], injectable hydrogel [39], microspheres [40], and MNs [1] are initially showing promise in the treatment of periodontal diseases. Considering the continuous flow of saliva, most nanoparticles or microspheres cannot achieve long retention and controllable drug release, requiring repeated dosing. The injectable hydrogel and some hard scaffold need to implanted into the periodontal tissue with an invasive procedure, causing unpleasant feeling to the patient. The MN-based periodontal treatments have considerable potential, but further optimization of the MN design is needed to reduce the impact on oral function. Therefore, it is expected that still more efforts will be made to develop new detachable MNs to manage oral diseases.
Herein, inspired by the behavior of the bee sting separation, we have fabricated separable MNs with ideal responsive drug releasing and antiperiodontal pathogen abilities to conquer the above problems. Owing to the direct penetration of MNs into the sulcus, the drug could be injected into the bottom of the sulcus to kill the infiltrating bacteria. Also, the separation between MNs and the MN base minimized the effects of MNs on normal oral function as the space taken by MNs was reduced sharply. Besides, due to the slowly degraded protective PLGA shells and ROS-responsive PLGA-TK-PEG tips, these MNs achieved inflammation-responsive local drug delivery and thus effectively avoided the systemic adverse reactions caused by antianaerobic antibiotics. In addition, the MNs showed an outstanding performance in antibacteria and bone loss inhibition in the rat periodontitis model. These properties make the drug-loaded MNs potential candidates for periodontal diseases and other oral applications.
Polyvinyl acetate, fetal bovine serum, and cell culture medium (high-glucose Dulbecco’s modified Eagle medium) were obtained from Adamas-beta (Shanghai, China). Fluorescent polystyrene nanoparticles (L2153 and L9777) were from Sigma. The CCK-8 was purchased from Bimake.
The MNs were developed with a modified polydimethylsiloxane mold as previously described [41]. The tips of the MNs were designed with 220 μm (diameter) and 430 μm (height). The PLGA-TK-PEG (15%) in diglyme/water (95%/5%, v/v) was added to form ROS-responsive release tips. After a vacuum for 10 min, the solution entered the end of the tips, followed by solvent evaporation to solidify. PLGA (15%) was added to form the shells, the PLGA could attach to the model to form the shell after the solvent evaporates, and the space to form core could be retained. After total solidification, Met (10 mg/ml) dissolved in 8% polyvinyl acetate solution was put as the core of tips to act as the therapeutic. The corresponding fluorescent nanoparticles were added to observe MNs under fluorescence microscopy. To test the ROS responsiveness of MNs, 1% H2O2 was used to mimic the high ROS environment. After incubation for 24 h, a scanning electron microscopy test was conducted to analyze the change of tips.
The force collection is launched when the sensor contacts the tips at a certain speed (0.2 mm/s). To test the MNs' penetration ability, MNs were pressed into a rat’s gingival. The tissue was dealt with gentian violet (1%) for 5 min to make the change obvious. After that, the tissue was collected for H&E staining.
To test the stability of MNs, a degradation detection was tested in simulated human saliva. The chips of MNs were weighed precisely, and after continuous vibration under 37 °C, the chips were dried and their mass was measured. The volume change was also detected by the measurement of MNs’ diameter and height.
The FITC-BSA was used to mimic the drug in the MNs. After storage in the artificial saliva for a predetermined time, the supernatant was taken out to detect the spectrum at 520 nm under the excitation of 494 nm. The concentration was calculated through the curve of the standard substance.
P.g. is the leading pathogen resulting in the periodontists. To test the antibacterial capacity on P.g., the P.g. was seeded on a plate. The MNs were sterilized with ultraviolet irradiation for 24 hours. After MN application, bacteria were cultured for 7 d before checking the colony formation. Also, the MNs were incubated with bacteria in liquid nutrient medium for 24 h, after which the supernatants were recoated on a plate.
The 3T3, HaCaT, and HUVEC cell lines were used as model cells to test the toxicity. The cells were added in a 96-well plate, with 3,000 cells per well, respectively. After attachment, the MNs were put into the culture system after sterilization. Then, the CCK-8 test and live/dead staining were conducted on the first, second, and third day. The calcein-acetoxymethyl/propidium iodide (PI) were added to detect the live/dead status following the manual with fluorescence microscopy.
All the animal experiments were under the approval of the Animal Investigation Ethics Committee of The Affiliated Drum Tower Hospital of Nanjing University Medical School (2021AE02007). For rat models of periodontitis, female Sprague Dawley rats were used. After anesthesia, silk sutures (4-0) were inserted and knotted around the subgingival area of the maxillary M2 (second molar). A high-sugar drink was applied during the model's build to accelerate the process. After confirming the model establishment with micro-CT, the silk was removed, followed by the treatment. The animal was divided into 3 groups: (a) control group (untreated); (b) empty MNs (without drug); and (c) MNs with drug. After the rat was anesthetized with 2% isoflurane, the MNs were inserted into the gingival sulcus through the gingival, horizontally, and the bases were removed when separating from the tips. The patches were checked daily to ensure that the MNs were in place. The MNs were reported when missing, and the rats' weights were measured every other day.
The rats were sacrificed under anesthesia when the treatment was over. The major organs and local tissue in the oral cavity were collected for pathological examination. The tissues were fixed with 4% paraformaldehyde overnight, followed by embedment in paraffin. The maxillary bones were fixed in 4% paraformaldehyde. After micro-CT analysis, they were decalcified in a decalcifying solution (10% EDTA and 1% NaOH) for 20 d. After puncture confirmation of decalcification, tissue fixation and embedding were performed. The serial sections of rat maxillary were obtained along the mesiodistal direction, followed by H&E staining. IHC staining was conducted separately on maxillary sections with TNF-α, IL-6, iNOS, and Arg-1.
All data in the figures were demonstrated as means with standard deviation (mean ± SD). The statistics were analyzed using GraphPad software by the Student t test between 2 groups and 1-way analysis of variance for more than 2 groups.
1.
Zhang X, Hasani-Sadrabadi MM, Zarubova J, Dashtimighadam E, Haghniaz R, Khademhosseini A, Butte MJ, Moshaverinia A, Aghaloo T, Li S. Immunomodulatory microneedle patch for periodontal tissue regeneration. Matter. 2022;5(2):666–682.
2.
Slots J. Concise evaluation and therapeutic guidelines for severe periodontitis: A public health perspective. Periodontol 2000. 2022;90(1):262–265.
3.
Lamont RJ, Koo H, Hajishengallis G. The oral microbiota: Dynamic communities and host interactions. Nat Rev Microbiol. 2018;16(12):745–759.
4.
Hympanova M, Oliver-Urrutia C, Vojta M, Macháček M, Krupka P, Kukla R, Celko L, Montufar EB, Marek J. Assessment of Streptococcus mutans biofilm formation on calcium phosphate ceramics: The role of crystalline composition and microstructure. Biomater Adv. 2022;135:Article 212750.
5.
Sun N, Wang N, Qu L. Clinical symptoms and quality of life improvement value of ornidazole mixture in auxiliary filling treatment of patients with endodontic disease. Contrast Media Mol Imaging. 2022;2022:Article 7181258.
6.
Ryskova L, Zahradnicek J, Kukla R, Bolehovska R, Vajda M, Pavlik I, Bostik P, Ryska P. Dual infection of an open fracture caused by Mycobacterium setense and Clostridium celerecrescens. Antibiotics. 2022;11(9):1254.
7.
Ferreira JA, Kantorski KZ, Dubey N, Daghrery A, Fenno JC, Mishina Y, Chan HL, Mendonça G, Bottino MC. Personalized and defect-specific antibiotic-laden scaffolds for periodontal infection ablation. ACS Appl Mater Interfaces. 2021;13(42):49642–49657.
8.
Yan N, Xu J, Liu G, Ma C, Bao L, Cong Y, Wang Z, Zhao Y, Xu W, Chen C. Penetrating macrophage-based nanoformulation for periodontitis treatment. ACS Nano. 2022.
9.
Kappel BA, De Angelis L, Puetz A, Ballanti M, Menghini R, Marx N, Federici M. Antibiotic-induced gut microbiota depletion exacerbates host hypercholesterolemia. Pharmacol Res. 2023;187:106570.
10.
Lu S, Feng W, Yao X, Song X, Guo J, Chen Y, Hu Z. Microorganism-enabled photosynthetic oxygeneration and ferroptosis induction reshape tumor microenvironment for augmented nanodynamic therapy. Biomaterials. 2022;287:Article 121688.
11.
Ye Z, Cao Y, Miao C, Liu W, Dong L, Lv Z, Iheozor-Ejiofor Z, Li C. Periodontal therapy for primary or secondary prevention of cardiovascular disease in people with periodontitis. Cochrane Database Syst Rev. 2022;10(10):CD009197.
12.
Yan M, Pan Y, Lu S, Li X, Wang D, Shao T, Wu Z, Zhou Q. Chitosan-CaP microflowers and metronidazole loaded calcium alginate sponges with enhanced antibacterial, hemostatic and osteogenic properties for the prevention of dry socket after tooth removal. Int J Biol Macromol. 2022;212:134–145.
13.
Zhang X, Chen G, Liu Y, Sun L, Sun L, Zhao Y. Black phosphorus-loaded separable microneedles as responsive oxygen delivery carriers for wound healing. ACS Nano. 2020;14(5):5901–5908.
14.
Ma W, Zhang X, Liu Y, Fan L, Gan J, Liu W, Zhao Y, Sun L. Polydopamine decorated microneedles with Fe-MSC-derived nanovesicles encapsulation for wound healing. Adv Sci. 2022;9(13):Article e2103317.
15.
Yang C, Sheng T, Hou W, Zhang J, Cheng L, Wang H, Liu W, Wang S, Yu X, Zhang Y, et al.Glucose-responsive microneedle patch for closed-loop dual-hormone delivery in mice and pigs. Sci Adv. 2022;8(48):Article eadd3197.
16.
Caffarel-Salvador E, Kim S, Soares V, Tian RY, Stern SR, Minahan D, Yona R, Lu X, Zakaria FR, Collins J, et al.A microneedle platform for buccal macromolecule delivery. Sci Adv. 2021;7(4):Article eabe2620.
17.
Wu D, Shou X, Yu Y, Wang X, Chen G, Zhao Y, Sun L. Biologics-loaded photothermally dissolvable hyaluronic acid microneedle patch for psoriasis treatment. Adv Funct Mater. 2022;32(47):Article 2205847.
18.
Su Y, Mainardi VL, Wang H, McCarthy A, Zhang YS, Chen S, John JV, Wong SL, Hollins RR, Wang G, et al.Dissolvable microneedles coupled with nanofiber dressings eradicate biofilms via effectively delivering a database-designed antimicrobial peptide. ACS Nano. 2020;14(9):11775–11786.
19.
Lin F, Wang Z, Xiang L, Wu L, Liu Y, Xi X, Deng L, Cui W. Transporting hydrogel via Chinese acupuncture needles for lesion positioning therapy. Adv Sci. 2022;9(17):Article e2200079.
20.
Chen Z, Li H, Bian Y, Wang Z, Chen G, Zhang X, Miao Y, Wen D, Wang J, Wan G, et al.Bioorthogonal catalytic patch. Nanotechnol Nat. 2021;16(8):933–941.
21.
Zhang X, Chen G, Wang Y, Fan L, Zhao Y. Arrowhead composite microneedle patches with anisotropic surface adhesion for preventing intrauterine adhesions. Adv Sci. 2022;9(12):Article 2104883.
22.
Fan L, Zhang X, Nie M, Xu Y, Wang Y, Shang L, Zhao Y, Zhao Y. Photothermal responsive microspheres-triggered separable microneedles for versatile drug delivery. Adv Funct Mater. 2021;32(13):2110746.
23.
Chen Q, Xiao Z, Wang C, Chen G, Zhang Y, Zhang X, Han X, Wang J, Ye X, Prausnitz MR, et al.Microneedle patches loaded with nanovesicles for glucose transporter-mediated insulin delivery. ACS Nano. 2022.
24.
Chen J, Niu H, Guan L, Yang Z, He Y, Zhao J, Wu C, Wang Y, Lin K, Zhu Y. Microneedle-assisted transdermal delivery of 2D bimetallic metal–organic framework nanosheet-based cascade biocatalysts for enhanced catalytic therapy of melanoma. Adv Healthc Mater. 2023;12(7):2202474.
25.
Xu Y, Wu X, Zhang X, Zu Y, Tan Q, Zhao Y. Living microneedle patch with adipose-derived stem cells embedding for diabetic ulcer healing. Adv Funct Mater. 2022;33(1):Article 2209986.
26.
Chi J, Sun L, Cai L, Fan L, Shao C, Shang L, Zhao Y. Chinese herb microneedle patch for wound healing. Bioact Mater. 2021;6(10):3507–3514.
27.
Lu Y, Ren T, Zhang H, Jin Q, Shen L, Shan M, Zhao X, Chen Q, Dai H, Yao L, et al.A honeybee stinger-inspired self-interlocking microneedle patch and its application in myocardial infarction treatment. Acta Biomater. 2022.
28.
Hu S, Zhu D, Li Z, Cheng K. Detachable microneedle patches deliver mesenchymal stromal cell factor-loaded nanoparticles for cardiac repair. ACS Nano. 2022;16(10):15935–15945.
29.
Shi H, Xue T, Yang Y, Jiang C, Huang S, Yang Q, Lei D, You Z, Jin T, Wu F, et al.Microneedle-mediated gene delivery for the treatment of ischemic myocardial disease. Sci Adv. 2020;6(25):Article eaaz3621.
30.
Li S, Li Y, Yu F, Li N, Liu C, Mao J, Sun H, Hu Y, Zhu Y, Zhou M, et al.Human endometrium-derived adventitial cell spheroid-loaded antimicrobial microneedles for uterine regeneration. Small. 2022;18(31):Article e2201225.
31.
Lee J, Jang EH, Kim JH, Park S, Kang Y, Park S, Lee K, Kim JH, Youn YN, Ryu W. Highly flexible and porous silk fibroin microneedle wraps for perivascular drug delivery. J Control Release. 2021;340:125–135.
32.
Zhang X, Cheng Y, Liu R, Zhao Y. Globefish-inspired balloon catheter with intelligent microneedle coating for endovascular drug delivery. Adv Sci. 2022;9(34):Article 2204497.
33.
Choi CK, Kim JB, Jang EH, Youn YN, Ryu WH. Curved biodegradable microneedles for vascular drug delivery. Small. 2012;8(16):2483–2488.
34.
Lee K, Xue Y, Lee J, Kim HJ, Liu Y, Tebon P, Sarikhani E, Sun W, Zhang S, Haghniaz R, et al.A patch of detachable hybrid microneedle depot for localized delivery of mesenchymal stem cells in regeneration therapy. Adv Funct Mater. 2020;30(23):Article 2000086.
35.
Qi M, Ren X, Li W, Sun Y, Sun X, Li C, Yu S, Xu L, Zhou Y, Song S, et al.NIR responsive nitric oxide nanogenerator for enhanced biofilm eradication and inflammation immunotherapy against periodontal diseases. Nano Today. 2022;43.
36.
Tian Y, Li Y, Liu J, Lin Y, Jiao J, Chen B, Wang W, Wu S, Li C. Photothermal therapy with regulated Nrf2/NF-κB signaling pathway for treating bacteria-induced periodontitis. Bioact Mater. 2021;9:428–445.
37.
Yin Y, Tian BM, Li X, Yu YC, Deng DK, Sun LJ, Qu HL, Wu RX, Xu XY, Sun HH, et al.Gold nanoparticles targeting the autophagy-lysosome system to combat the inflammation-compromised osteogenic potential of periodontal ligament stem cells: From mechanism to therapy. Biomaterials. 2022;288:121743.
38.
Pereira AO, Lopes IMI, Silva TR, Correa TQ, Paschoalin RT, Inada NM, Iermak I, van Riel Neto F, Araujo-Chaves JC, Marletta A, et al.Bacterial photoinactivation using PLGA electrospun scaffolds. ACS Appl Mater Interfaces. 2021;13(27):31406–31417.
39.
Zhao X, Yang Y, Yu J, Ding R, Pei D, Zhang Y, He G, Cheng Y, Li A. Injectable hydrogels with high drug loading through B-N coordination and ROS-triggered drug release for efficient treatment of chronic periodontitis in diabetic rats. Biomaterials. 2022;282:Article 121387.
40.
Song C, Huang D, Zhao C, Zhao Y. Abalone-inspired adhesive and photo-responsive microparticle delivery systems for periodontal drug therapy. Adv Sci. 2022;9(30):Article e2202829.
41.
Zhang Z, Wang Y, Chen Z, Xu D, Zhang D, Wang F, Zhao Y. Tailoring conductive inverse opal films with anisotropic elliptical porous patterns for nerve cell orientation. J Nanobiotechnol. 2022;20(1):117.
Year 2023 volume 6 Issue 4
PDF
53
30
Cite this Article
BibTeX
Article Info
doi: 10.34133/research.0119
  • Receive Date:2023-02-02
  • Online Date:2026-10-28
  • Published:2023-04-20
Article Data
Affiliations
History
  • Received:2023-02-02
  • Accepted:2023-03-26
Affiliations
    1Department of Rheumatology and Immunology, Institute of Translational Medicine, The Affiliated Drum Tower Hospital of Nanjing University Medical School, Nanjing 210002, China.
    2State Key Laboratory of Bioelectronics, School of Biological Science and Medical Engineering, Southeast University, Nanjing 210096, China.
    3Chemistry and Biomedicine Innovation Center, Nanjing University, Nanjing 210023, China.

Corresponding:

* Address correspondence to:
References
Share
https://castjournals.cast.org.cn/joweb/research/EN/10.34133/research.0119
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT