收藏切换
Rubber Plantation Suitability Assessment in Yunnan Province Based on Geographical Zoning Modeling
收藏切换
PDF
Fei LONG1, 2, Tanghui QIAN3, 4, *, Dingjie ZHOU3, Guiliang CHEN1, 2, Yirui WANG3, Xingquan LI3, Liwei LI3
Chinese Journal of Tropical Crops | 2026, 47(1) : 259 - 268
Less
收藏切换
Chinese Journal of Tropical Crops | 2026, 47(1): 259-268
Agricultural Ecology & Environmental Protection
Rubber Plantation Suitability Assessment in Yunnan Province Based on Geographical Zoning Modeling
Full
Fei LONG1, 2, Tanghui QIAN3, 4, *, Dingjie ZHOU3, Guiliang CHEN1, 2, Yirui WANG3, Xingquan LI3, Liwei LI3
Affiliations
  • 1.Yunnan Key Laboratory of Sustainable Utilization Research on Rubber Tree, Jinghong, Yunnan 666100, China
  • 2.Yunnan Academy of Tropical Crops Sciences, Jinghong, Yunnan 666100, China
  • 3.Surveying and Mapping Engineering Institute of Yunnan Province, Kunming, Yunnan 650021, China
  • 4.Yunnan Normal University, Kunming, Yunnan 650021, China
Published: 2026-01-25 doi: 10.3969/j.issn.1000-2561.2026.01.024
Outline
收藏切换

To address the limitation of conventional rubber plantation suitability assessments that overlook geographical environmental heterogeneity, this study proposes a suitability evaluation approach based on geographical zoning modeling. Eight key indicators were selected from three dimensions, topographic conditions, hydrothermal conditions, and cold damage risk, to construct the evaluation index system. The weight of these indicators was determined by integrating the Analytic Hierarchy Process (AHP) with the GeoDetector method. Using the Ailao Mountains ridge as a geographical demarcation, the rubber plantation area in Yunnan province was divided into western and eastern zones, for which region-specific factor suitability grading standards were established and applied for factor reclassification. Subsequently, the reclassified factors were integrated through linear weighting to produce a comprehensive suitability evaluation, classifying the results into four categories, unsuitable, marginally suitable, moderately suitable, and highly suitable. Among the six prefecture-level regions engaged in rubber cultivation, highly suitable areas accounted for approximately 4.29% of the total land area, moderately suitable areas for 2.79%, and marginally suitable areas for 5.06%, totaling about 12.14%. These areas are mainly concentrated in Xishuangbanna, Pu'er and Honghe. Overlay analysis with 2024 rubber plantation distribution data revealed that about 47.80% of existing plantations in highly suitable zones, 22.09% in moderately suitable zones, and 19.29% in marginally suitable zones, accounting for a combined 89.18%. This distribution shows a high degree of spatial consistency with the actual planting patterns. The evaluation results, with a spatial resolution of 10 m, are capable of reflecting fine-scale variations in Yunnan's mountainous environments, and can thus provide valuable references for rubber plantation planning and adjustment in Yunnan province.

rubber  /  plantation suitability evaluation  /  geographical zoning modeling  /  Analytic Hierarchy Process  /  GeoDetector
Fei LONG, Tanghui QIAN, Dingjie ZHOU, Guiliang CHEN, Yirui WANG, Xingquan LI, Liwei LI. Rubber Plantation Suitability Assessment in Yunnan Province Based on Geographical Zoning Modeling[J]. Chinese Journal of Tropical Crops, 2026 , 47 (1) : 259 -268 . DOI: 10.3969/j.issn.1000-2561.2026.01.024
Year 2026 volume 47 Issue 1
PDF
40
12
Cite this Article
BibTeX
Article Info
doi: 10.3969/j.issn.1000-2561.2026.01.024
  • Receive Date:2025-08-21
  • Online Date:2026-06-26
  • Published:2026-01-25
Article Data
Affiliations
History
  • Received:2025-08-21
  • Revised:2025-08-28
Funding
Affiliations
    1.Yunnan Key Laboratory of Sustainable Utilization Research on Rubber Tree, Jinghong, Yunnan 666100, China
    2.Yunnan Academy of Tropical Crops Sciences, Jinghong, Yunnan 666100, China
    3.Surveying and Mapping Engineering Institute of Yunnan Province, Kunming, Yunnan 650021, China
    4.Yunnan Normal University, Kunming, Yunnan 650021, China
References
Share
https://castjournals.cast.org.cn/joweb/rdzwxb/EN/10.3969/j.issn.1000-2561.2026.01.024
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数

Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)

Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT