收藏切换
Fault Diagnosis Method for Power Battery Based on Quantification of Cell Abnormality with 1dCNN-LSTM
收藏切换
PDF
Jiqing Chen1, 2, Yujia Feng1, 2, Fengchong Lan1, 2, Ping Wang1, 2
Automotive Engineering | 2024, 46(7) : 1177 - 1188
Less
收藏切换
Automotive Engineering | 2024, 46(7): 1177-1188
Fault Diagnosis Method for Power Battery Based on Quantification of Cell Abnormality with 1dCNN-LSTM
Full
Jiqing Chen1, 2, Yujia Feng1, 2, Fengchong Lan1, 2, Ping Wang1, 2
Affiliations
  • 1. School of Mechanical and Automotive Engineering,South China University of Technology,Guangzhou  510640
  • 2. South China University of Technology,Guangdong Provincial Key Laboratory of Automotive Engineering,Guangzhou  510640
Published: 2024-07-25 doi: 10.19562/j.chinasae.qcgc.2024.07.005
Outline
收藏切换

Accurate performance evaluation of power battery cells is of great significance to ensuring the safety of power batteries. For the existing data-driven battery fault diagnosis algorithms, mostly individual cells are compared with each other and the outlier cells are identified as faulty cells by classification, based on differences in characteristic parameters such as single cell voltage. However, if there are multiple cells of similar abnormally performance in the power battery pack, or all individual batteries show an overall performance deterioration, it is difficult to distinguish individual cells or even there is no significant outliers, and the application of the mutual comparison strategy is limited. A power battery fault diagnosis method is proposed based on 1dCNN-LSTM to quantify the abnormality of a single cell in this paper. Combining the three types of characteristics of vehicle motion status, drive system status and power battery electrical signal, the 1dCNN-LSTM fusion model is established to estimate the individual cell voltage under ideal conditions as reference. The difference between the real-time voltage reference value and the measured voltage value is used to quantify the abnormality of each cell. Combined with actual cases, it is shown that for thermal runaway case due to single cell failure, the abnormal performance of the faulty cell compared to others can be identified 7 days before accident, and potential risk can be recognized in discharge processes from a year of more before the accident. For overall deterioration cases without obvious individual cells inconsistency, the deterioration evolution within the last 7 days can be tracked.

power battery  /  fault diagnosis  /  cell inconsistency  /  fused model  /  real-time voltage estimation
Jiqing Chen, Yujia Feng, Fengchong Lan, Ping Wang. Fault Diagnosis Method for Power Battery Based on Quantification of Cell Abnormality with 1dCNN-LSTM[J]. Automotive Engineering, 2024 , 46 (7) : 1177 -1188 . DOI: 10.19562/j.chinasae.qcgc.2024.07.005
Year 2024 volume 46 Issue 7
PDF
316
132
Cite this Article
BibTeX
Article Info
doi: 10.19562/j.chinasae.qcgc.2024.07.005
  • Receive Date:2024-03-10
  • Online Date:2025-07-29
  • Published:2024-07-25
Article Data
Affiliations
History
  • Received:2024-03-10
  • Revised:2024-04-13
Funding
Affiliations
    1. School of Mechanical and Automotive Engineering,South China University of Technology,Guangzhou  510640
    2. South China University of Technology,Guangdong Provincial Key Laboratory of Automotive Engineering,Guangzhou  510640
References
Share
https://castjournals.cast.org.cn/joweb/qcygc/EN/10.19562/j.chinasae.qcgc.2024.07.005
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数

Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)

Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT