收藏切换
Quantitative Evaluation Method of Safety Goal During Concept Phase
收藏切换
Lingguo Zhao, Jiakui Ning, Wenqiang Tang, Yang Liu, Jiahe Qin
Automotive Digest | 2026, (9) : 50 - 57
Less
收藏切换
Automotive Digest | 2026, (9): 50-57
• Special Topic on Automotive Chip Technology •
Quantitative Evaluation Method of Safety Goal During Concept Phase
Full
Lingguo Zhao, Jiakui Ning, Wenqiang Tang, Yang Liu, Jiahe Qin
Affiliations
  • Global R&D Center, China FAW Corporation Limited, Changchun 130013
Published: 2026-09-05 doi: 10.19822/j.cnki.1671-6329.20240315
Outline
收藏切换

To address the issue of quantitative data during the concept phase, this paper proposes a quantitative safety goal assessment method based on the ISO 26262 standard. By establishing a mapping model between fault scenario dynamics and injury characteristics, simulations were conducted to quantitatively determine the Severity (S), Controllability (C), and Fault Tolerant Time Interval (FTTI). The results indicate that the FTTI increases with rising time headway but decreases as driver reaction time extends; moreover, high-speed conditions exhibit higher sensitivity to variations in these parameters. Without requiring physical prototypes, this method efficiently generates quantitative metrics through parameter configuration, thereby supporting the precise definition of safety goals in the concept phase.

Function safety  /  Hazard analysis and risk assessment  /  Safety goal  /  Safety state
赵令国, 宁甲奎, 唐文强, 刘阳, 秦加合. 概念阶段安全目标的量化评估方法. 汽车文摘, 2026 , (9) : 50 -57 . DOI: 10.19822/j.cnki.1671-6329.20240315
Lingguo Zhao, Jiakui Ning, Wenqiang Tang, Yang Liu, Jiahe Qin. Quantitative Evaluation Method of Safety Goal During Concept Phase[J]. Automotive Digest, 2026 , (9) : 50 -57 . DOI: 10.19822/j.cnki.1671-6329.20240315
Year 2026 volume Issue 9
148
33
Cite this Article
BibTeX
Article Info
doi: 10.19822/j.cnki.1671-6329.20240315
  • Online Date:2026-09-23
  • Published:2026-09-05
Article Data
Affiliations
History
Affiliations
    Global R&D Center, China FAW Corporation Limited, Changchun 130013
References
Share
https://castjournals.cast.org.cn/joweb/qcwz/EN/10.19822/j.cnki.1671-6329.20240315
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT