收藏切换
Research on the Optimization of DCT Performance Based on Dual Clutch Launching
收藏切换
PDF
Jun Gong, Bin Li, Bin Xiong, Yuqi Chen
Automobile Technology | 2025, (3) : 56 - 62
Less
收藏切换
Automobile Technology | 2025, (3): 56-62
Special Topic on Multimodal Information Monitoring and Recognition Technologies for Human Factors in Intelligent Driving
Research on the Optimization of DCT Performance Based on Dual Clutch Launching
Full
Jun Gong, Bin Li, Bin Xiong, Yuqi Chen
Affiliations
  • Magna Powertrain Jiangxi Co., Ltd., Nanchang 330013
Published: 2025-03-24 doi: 10.19620/j.cnki.1000-3703.20231062
Outline
收藏切换

In order to solve the problem of clutch overheating during the launching of a Dual Clutch Transmission (DCT) vehicle in the Drive mode of D1 gear under extreme working conditions, this paper proposes a dual-clutch launching control method to improve the climbing and escape performance of the vehicle. Based on the analysis of the hardware structural conditions, the clutch plate temperature model and the specific process of DCT launching, this paper proposes to use the D2 gear clutch to undertake the useless slipping power at the beginning of the steady speed stage of launching, and then switch back to the D1 gear clutch when the engine torque gradually increases to exceed the threshold, the paper then elaborates in detail the activation conditions and specific implementation process of the control method. Vehicle test verification shows that the dual-clutch launching has obvious advantages in clutch temperature control and driving smoothness compared with the single-clutch launching, and the vehicle climbing and escape performance has been significantly improved.

Dual Clutch Transmission (DCT)  /  Dual Clutch Launch  /  DCT Overheating
Jun Gong, Bin Li, Bin Xiong, Yuqi Chen. Research on the Optimization of DCT Performance Based on Dual Clutch Launching[J]. Automobile Technology, 2025 , (3) : 56 -62 . DOI: 10.19620/j.cnki.1000-3703.20231062
Year 2025 volume Issue 3
PDF
263
108
Cite this Article
BibTeX
Article Info
doi: 10.19620/j.cnki.1000-3703.20231062
  • Online Date:2025-11-18
  • Published:2025-03-24
Article Data
Affiliations
History
  • Revised:2024-06-21
Affiliations
    Magna Powertrain Jiangxi Co., Ltd., Nanchang 330013
References
Share
https://castjournals.cast.org.cn/joweb/qcjs/EN/10.19620/j.cnki.1000-3703.20231062
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数

Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)

Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT