收藏切换
Anisotropic Fracture Model Development for Extruded Aluminum Profiles and Its Application to Full-Vehicle Crash
收藏切换
Qingyang Huang, Zhigao He, Qinghu Kong, Jun Zhou, Ruidie Zhu
Automobile Technology & Material | 2026, (10) : 12 - 22
Less
收藏切换
Automobile Technology & Material | 2026, (10): 12-22
Anisotropic Fracture Model Development for Extruded Aluminum Profiles and Its Application to Full-Vehicle Crash
Full
Qingyang Huang, Zhigao He, Qinghu Kong, Jun Zhou, Ruidie Zhu
Affiliations
  • BYD Auto Industry Co., Ltd., Shenzhen 518000
Published: 2026-10-20 doi: 10.19710/J.cnki.1003-8817.20260238
Outline
收藏切换

To address the significant anisotropy and complex failure behaviors exhibited by high-strength extruded aluminum alloys in vehicle crash structures, the prediction accuracy of the traditional Barlat89 criterion and the Yld2000-2d criterion based on dual linear tensor transformations is systematically investigated in crash simulation. Static and dynamic mechanical tests covering multiple stress states (pure shear, tension-shear, notched, and central-hole specimens, etc.) are conducted based on actual components, and the full-field local strain evolution responses and fracture limits of 6082-T6 aluminum profiles are obtained. To address the difficulty in direct calibration caused by measurement errors and the lack of biaxial tensile data, an inverse identification scheme based on Digital Image Correlation (DIC) and multi-load-case global optimization is proposed, by which the anisotropic parameters and the Modified Mohr-Coulomb (MMC) criterion coupled with the GISSMO damage boundary are efficiently calibrated. It is demonstrated by the verification results that the anisotropic response of the material under complex loading paths is precisely captured by the Yld2000-2d criterion. In the load cases of bumper beam drop-weight impact and full-vehicle low-speed crash, the macroscopic tearing morphology is accurately reproduced by the model, and the prediction error of critical intrusion is significantly reduced from 16.1% (with the Barlat89 criterion) to 3.9%.

Extruded aluminum profile  /  Anisotropy  /  Barlat89 model  /  Yld2000-2d model  /  GISSMO damage model
黄庆洋, 何志高, 孔庆虎, 周俊, 朱瑞蝶. 挤压铝型材各向异性断裂模型开发与整车碰撞应用. 汽车工艺与材料, 2026 , (10) : 12 -22 . DOI: 10.19710/J.cnki.1003-8817.20260238
Qingyang Huang, Zhigao He, Qinghu Kong, Jun Zhou, Ruidie Zhu. Anisotropic Fracture Model Development for Extruded Aluminum Profiles and Its Application to Full-Vehicle Crash[J]. Automobile Technology & Material, 2026 , (10) : 12 -22 . DOI: 10.19710/J.cnki.1003-8817.20260238
Year 2026 volume Issue 10
53
6
Cite this Article
BibTeX
Article Info
doi: 10.19710/J.cnki.1003-8817.20260238
  • Online Date:2026-10-29
  • Published:2026-10-20
Article Data
Affiliations
History
Affiliations
    BYD Auto Industry Co., Ltd., Shenzhen 518000
References
Share
https://castjournals.cast.org.cn/joweb/qcgyycl/EN/10.19710/J.cnki.1003-8817.20260238
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT