PDF
Full
Outline
In order to eliminate surface defects around the roof antenna mounting boss, this paper used Autoform simulation and experimental verification to analyze 2 causes of defects, cause 1: stroke during the forming process is small, and the plastic deformation of the material is insufficient; cause 2: the pressing force of the pressing plate is insufficient, resulting in the deformation in the deformation area affecting the non-deformed area. Through the simulation analysis of the 2 process methods of the antenna mounting boss drawing forming and upper forming, it is confirmed that the upper forming process can effectively solve the defect around the antenna mounting boss, and the real effect is completely consistent with the theoretical simulation, which solves the problem of the surface defect of the antenna boss.
PDF
107
47
| 科 Family | 属数 Number of genus | 种数 Number of species | 占总种数比例 Percentage of total species (%) | 属 Genus | 种数 Number of species | 占总种数比例 Percentage of total species (%) |
|---|---|---|---|---|---|---|
| 鹅膏菌科Amanitaceae | 2 | 11 | 5.26 | 鹅膏菌属 Amanita | 10 | 4.78 |
| 小菇科 Mycenaceae | 2 | 12 | 5.74 | 丝盖伞属 Inocybe | 5 | 2.39 |
| 多孔菌科 Polyporaceae | 8 | 14 | 6.70 | 蜡蘑属 Laccaria | 5 | 2.39 |
| 红菇科 Russulaceae | 3 | 23 | 11.00 | 小皮伞属 Marasmius | 6 | 2.87 |
| 小菇属 Mycena | 11 | 5.26 | ||||
| 光柄菇属 Pluteus | 5 | 2.39 | ||||
| 红菇属 Russula | 17 | 8.13 | ||||
| 栓菌属 Trametes | 5 | 2.39 |
关闭全屏
No. 86 Xueyuan South Road, Haidian District, Beijing
010-62199257
qkjq@cast.org.cn
Copyright © 2025 China Association for Science and Technology. All rights reserved. For all open access content, the relevant licensing terms apply.
Sponsored by the Office of the Leading Group for Cybersecurity and Informatization of CAST, and supported by Science and Technology Review Publishing House
