收藏切换
Weld Characteristics and Properties of Laser Wire Filling Welding for Thin-Coated Hot-Formed Steel
收藏切换
PDF
Zhigong Jiang1, Baofeng Yang1, Tian Li1, Rui Wang2, Hong Xu2
Automobile Technology & Material | 2024, (1) : 15 - 19
Less
收藏切换
Automobile Technology & Material | 2024, (1): 15-19
Weld Characteristics and Properties of Laser Wire Filling Welding for Thin-Coated Hot-Formed Steel
Full
Zhigong Jiang1, Baofeng Yang1, Tian Li1, Rui Wang2, Hong Xu2
Affiliations
  • 1 CCAS (Changchun) Steel Service Center Ltd., Changchun 130103
  • 2 Jilin University, Changchun 130103
Published: 2024-01-20 doi: 10.19710/J.cnki.1003-8817.20230026
Outline
收藏切换

To reduce the adverse effect of aluminum silicon coating layer on the surface of steel plate on laser joint, laser wire filler welding joint with aluminum mass fraction less than 1% in weld was obtained by using thin-coated hot-formed steel material and laser wire filler welding technology. The macro and microstructure of the welded joint were analyzed, it was found that the welded joint was replaced by the whole martensite structure after hot forming, which avoided the softening phenomenon. The mechanical property analysis shows that the tensile strength of the sample increases from about 570 MPa to about 1 500 MPa after hot forming, and the weak link of the joint is located in the base material. High speed tensile has no adverse effect on the tensile strength of the joint, but the elongation at break is affected greatly.

Hot stamping steel  /  Laser wire filling welding  /  Martensite  /  Mechanical property
Zhigong Jiang, Baofeng Yang, Tian Li, Rui Wang, Hong Xu. Weld Characteristics and Properties of Laser Wire Filling Welding for Thin-Coated Hot-Formed Steel[J]. Automobile Technology & Material, 2024 , (1) : 15 -19 . DOI: 10.19710/J.cnki.1003-8817.20230026
Year 2024 volume Issue 1
PDF
212
90
Cite this Article
BibTeX
Article Info
doi: 10.19710/J.cnki.1003-8817.20230026
  • Online Date:2025-12-24
  • Published:2024-01-20
Article Data
Affiliations
History
Affiliations
    1 CCAS (Changchun) Steel Service Center Ltd., Changchun 130103
    2 Jilin University, Changchun 130103
References
Share
https://castjournals.cast.org.cn/joweb/qcgyycl/EN/10.19710/J.cnki.1003-8817.20230026
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数

Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)

Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT