Based on the 25% offset collision condition defined by the China Insurance Research Institute, this paper studies the structural design scheme of the A-pillar of a new energy vehicle. The effect on the crash safety of the basic structure, CBS rubber block reinforced structure, and hot blow forming tube reinforced structure are evaluated and compared. The manufacturing process of CBS rubber block and tube hot blow forming are introduced, and the hot blow forming process is simulated and analyzed. The tooling capital investment and unit cost of the two reinforced structures are further analyzed. The study shows that in the case of achieving an excellent level of small offset collision safety, the 1 500 MPa tube hot blow forming scheme has more advantages than the CBS rubber block scheme in terms of unit cost and light weight.
| 科 Family | 属数 Number of genus | 种数 Number of species | 占总种数比例 Percentage of total species (%) | 属 Genus | 种数 Number of species | 占总种数比例 Percentage of total species (%) |
|---|---|---|---|---|---|---|
| 鹅膏菌科Amanitaceae | 2 | 11 | 5.26 | 鹅膏菌属 Amanita | 10 | 4.78 |
| 小菇科 Mycenaceae | 2 | 12 | 5.74 | 丝盖伞属 Inocybe | 5 | 2.39 |
| 多孔菌科 Polyporaceae | 8 | 14 | 6.70 | 蜡蘑属 Laccaria | 5 | 2.39 |
| 红菇科 Russulaceae | 3 | 23 | 11.00 | 小皮伞属 Marasmius | 6 | 2.87 |
| 小菇属 Mycena | 11 | 5.26 | ||||
| 光柄菇属 Pluteus | 5 | 2.39 | ||||
| 红菇属 Russula | 17 | 8.13 | ||||
| 栓菌属 Trametes | 5 | 2.39 |