收藏切换
Material Selection Optimization for Service Performance Requirements of Small Motor Vehicle Gear Parts
收藏切换
PDF
Yi Feng1, Zengping Liu2, Xiang Gao1, Xiugang Yin2, Chaofeng Yan3, Zhihui Cai4
Automobile Technology & Material | 2023, (5) : 1 - 8
Less
收藏切换
Automobile Technology & Material | 2023, (5): 1-8
Material Selection Optimization for Service Performance Requirements of Small Motor Vehicle Gear Parts
Full
Yi Feng1, Zengping Liu2, Xiang Gao1, Xiugang Yin2, Chaofeng Yan3, Zhihui Cai4
Affiliations
  • 1 China Automotive Engineering Research Institute Co., Ltd., Chongqing 401122
  • 2 Chengde Jianlong Special Steel Co., Ltd., Chengde 067300
  • 3 Shanxi Deshi Auto Parts (Group) Co., Ltd., Xi'an 710200
  • 4 Taiyuan University of Science and Technology, Taiyuan 030024
Published: 2023-05-20 doi: 10.19710/J.cnki.1003-8817.20220279
Outline
收藏切换

To meet the product development requirements of a domestic motorcycle enterprise, the bending impact, contact fatigue and single-tooth bending fatigue of 3 kinds of automobile gear steels were tested and compared. The advantages and disadvantages of service performance of those 3 kinds of gear steel were comprehensively evaluated by means of metallography, hardness and fracture surface. On this basis, the application effectiveness of the 3 kinds of gear steels was further verified from the perspective of parts. The results show that the comprehensive mechanical properties, process properties, contact fatigue and bending fatigue of 16MnCr5H are equivalent to those of 20CrMoH, and better than 20CrMnTiH. Therefore, 16MnCr5H can replace 20CrMoH and 20CrMnTiH to manufacture high-load motorcycle gears and meet the performance improvement and application cost performance targets.

Automobile  /  Gear steel  /  Bending impact  /  Contact fatigue  /  Single tooth bending fatigue
Yi Feng, Zengping Liu, Xiang Gao, Xiugang Yin, Chaofeng Yan, Zhihui Cai. Material Selection Optimization for Service Performance Requirements of Small Motor Vehicle Gear Parts[J]. Automobile Technology & Material, 2023 , (5) : 1 -8 . DOI: 10.19710/J.cnki.1003-8817.20220279
Year 2023 volume Issue 5
PDF
222
85
Cite this Article
BibTeX
Article Info
doi: 10.19710/J.cnki.1003-8817.20220279
  • Online Date:2025-12-01
  • Published:2023-05-20
Article Data
Affiliations
History
Affiliations
    1 China Automotive Engineering Research Institute Co., Ltd., Chongqing 401122
    2 Chengde Jianlong Special Steel Co., Ltd., Chengde 067300
    3 Shanxi Deshi Auto Parts (Group) Co., Ltd., Xi'an 710200
    4 Taiyuan University of Science and Technology, Taiyuan 030024
References
Share
https://castjournals.cast.org.cn/joweb/qcgyycl/EN/10.19710/J.cnki.1003-8817.20220279
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数

Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)

Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT