收藏切换
Analysis of Common Problems of Intermediate Support Assembly for Heavy Duty Truck
收藏切换
PDF
Yongkang Li, Bo Zhang, Biyun Li, Ruofei Cao
Automobile Technology & Material | 2023, (3) : 30 - 34
Less
收藏切换
Automobile Technology & Material | 2023, (3): 30-34
Analysis of Common Problems of Intermediate Support Assembly for Heavy Duty Truck
Full
Yongkang Li, Bo Zhang, Biyun Li, Ruofei Cao
Affiliations
  • Shanxi Heavy Duty Automobile Co., Ltd., Xi’an 710200
Published: 2023-03-20 doi: 10.19710/J.cnki.1003-8817.20220195
Outline
收藏切换

The intermediate support is the bridge between the frame and the final assembly suspension system of a heavy truck that serves to connect the balance shaft, and keep the forces balanced between the rear axle and the middle/rear axle. This paper studied the common problems of intermediate support warpage, width and diagonal out-of-tolerance in the assembly process of the intermediate support for a heavy duty truck, analyzed the causes and developed effective solutions. By increasing the pressure type guide pin hole, repairing the wear mold, adjusting the width of the aircraft beam assembly, regulating the order of bolting at different positions, these solutions reduced the unqualified rate and production cost of the intermediate support assembly, improved the overall quality and production efficiency of the heavy duty truck frame.

Intermediate support  /  Heavy duty truck  /  Process requirement  /  Solution
Yongkang Li, Bo Zhang, Biyun Li, Ruofei Cao. Analysis of Common Problems of Intermediate Support Assembly for Heavy Duty Truck[J]. Automobile Technology & Material, 2023 , (3) : 30 -34 . DOI: 10.19710/J.cnki.1003-8817.20220195
Year 2023 volume Issue 3
PDF
215
74
Cite this Article
BibTeX
Article Info
doi: 10.19710/J.cnki.1003-8817.20220195
  • Online Date:2025-12-01
  • Published:2023-03-20
Article Data
Affiliations
History
Affiliations
    Shanxi Heavy Duty Automobile Co., Ltd., Xi’an 710200
References
Share
https://castjournals.cast.org.cn/joweb/qcgyycl/EN/10.19710/J.cnki.1003-8817.20220195
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数

Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)

Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT