收藏切换
Microstructure & Corrosion Resistance Analysis of GA Coating under Cold Rolling Deformation
收藏切换
PDF
Xianlei Hu1, 2, Zhujian Qin1, Chunlai Niu1, Diwen Ke1, Ying Zhi1
Automobile Technology & Material | 2023, (1) : 1 - 7
Less
收藏切换
Automobile Technology & Material | 2023, (1): 1-7
Microstructure & Corrosion Resistance Analysis of GA Coating under Cold Rolling Deformation
Full
Xianlei Hu1, 2, Zhujian Qin1, Chunlai Niu1, Diwen Ke1, Ying Zhi1
Affiliations
  • 1 State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110819
  • 2 Suzhou Dongbaohaixing Metal Material Science and Technology Co., Ltd., Zhangjiagang 215600
Published: 2023-01-20 doi: 10.19710/J.cnki.1003-8817.20220052
Outline
收藏切换

The Galvannealed(GA)-coated sheets are subjected to cold rolling deformation, and the changes in the morphology, element distribution and corrosion resistance of the GA coating at different reduction rates are explored. The results show that the original coating before rolling is mainly composed of δ(FeZn7) and Γ(FeZn10) phases, and a free Zn layer with loose distributed holes is found on the surface of the coating. The holes are deformed into needle shape along the rolling direction, and the density gradually decreases. When the reduction rate is greater than 40%, the needle-like micro-holes disappears. With the increase of cold rolling reduction rate, the thickness of the coating layer decreases continuously, and the hardness of the coating layer and the substrate increases. When the reduction ratio is larger, the interface presents a zigzag shape. The change of reduction rate has little effect on the distribution of Zn and Fe elements, and there is an iron-rich diffusion layer at the interface between the coating and the substrate. When the reduction rate is greater than 20%, the coating is broken to a certain extent, and a small amount of O element begins to exist at the interface of the coating and the substrate. The weight loss of GA coated sheet under corrosion tends to be gentle with the increase of time, and the difference of loss weight between different reduction rates is small, and the coating after rolling still protects the substrate well.

GA coating  /  Reduction ratio  /  Cold rolling  /  Microstructure  /  Corrosion resistance
Xianlei Hu, Zhujian Qin, Chunlai Niu, Diwen Ke, Ying Zhi. Microstructure & Corrosion Resistance Analysis of GA Coating under Cold Rolling Deformation[J]. Automobile Technology & Material, 2023 , (1) : 1 -7 . DOI: 10.19710/J.cnki.1003-8817.20220052
Year 2023 volume Issue 1
PDF
186
70
Cite this Article
BibTeX
Article Info
doi: 10.19710/J.cnki.1003-8817.20220052
  • Online Date:2025-12-01
  • Published:2023-01-20
Article Data
Affiliations
History
Funding
Affiliations
    1 State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110819
    2 Suzhou Dongbaohaixing Metal Material Science and Technology Co., Ltd., Zhangjiagang 215600
References
Share
https://castjournals.cast.org.cn/joweb/qcgyycl/EN/10.19710/J.cnki.1003-8817.20220052
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数

Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)

Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT