收藏切换
Improvement on Projection Welding Quality of M12 Ring Projection Welding Nut
收藏切换
PDF
Huangrui Yang, Wei Xiong, Daqing Tang, Guipeng Fan
Automobile Technology & Material | 2023, (1) : 24 - 27
Less
收藏切换
Automobile Technology & Material | 2023, (1): 24-27
Improvement on Projection Welding Quality of M12 Ring Projection Welding Nut
Full
Huangrui Yang, Wei Xiong, Daqing Tang, Guipeng Fan
Affiliations
  • Dongfeng Industrial Co., Ltd., Wuhan 430056
Published: 2023-01-20 doi: 10.19710/J.cnki.1003-8817.20220207
Outline
收藏切换

Projection welding of M12 ring convex welding nut and 2.5 mm thick plate has the defect of faulty welding, using energy storage welding machine in place of power frequency convex welding machine can solve the defect of faulty welding. There is an optimal combination of welding voltage, tempering voltage and welding pressure in the welding parameters of the energy storage welder. The orthogonal test is suitable for optimizing the optimal welding parameters. The optimized parameters (welding voltage 650 V, tempering voltage 650 V, welding pressure 16 kN) were used for test welding to obtain a convex welding joint with ejection force of 33.55 kN, which was greater than the target value of 16 kN. The high strength joining between ring convex welding nut and thick plate is realized, proving that the capacitor energy storage welding machine has the advantages of energy saving, high efficiency and stable welding quality, which is suitable for the welding between large nut sizing over M10 and thick plate.

Projection welding of thick plate  /  Orthogonal test  /  Stored energy welding machine
Huangrui Yang, Wei Xiong, Daqing Tang, Guipeng Fan. Improvement on Projection Welding Quality of M12 Ring Projection Welding Nut[J]. Automobile Technology & Material, 2023 , (1) : 24 -27 . DOI: 10.19710/J.cnki.1003-8817.20220207
Year 2023 volume Issue 1
PDF
240
102
Cite this Article
BibTeX
Article Info
doi: 10.19710/J.cnki.1003-8817.20220207
  • Online Date:2025-12-01
  • Published:2023-01-20
Article Data
Affiliations
History
Affiliations
    Dongfeng Industrial Co., Ltd., Wuhan 430056
References
Share
https://castjournals.cast.org.cn/joweb/qcgyycl/EN/10.19710/J.cnki.1003-8817.20220207
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数

Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)

Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT