收藏切换
Simulation and Analysis of Headlamp Posture in Dimensional Post-Matching Based on PolyWorks
收藏切换
PDF
Zelong Zhang1, 2, Dengfeng Wang1, 2, Weichao Sun1, 2, Ruixin Zhang1, 2
Automobile Technology & Material | 2024, (12) : 16 - 21
Less
收藏切换
Automobile Technology & Material | 2024, (12): 16-21
Simulation and Analysis of Headlamp Posture in Dimensional Post-Matching Based on PolyWorks
Full
Zelong Zhang1, 2, Dengfeng Wang1, 2, Weichao Sun1, 2, Ruixin Zhang1, 2
Affiliations
  • 1 Great Wall Motors Corporation R&D Center, Baoding 071000
  • 2 Hebei Automobile Engineering Technology Innovation Center, Baoding 071000
Published: 2024-12-20 doi: 10.19710/J.cnki.1003-8817.20240266
Outline
收藏切换

Gap interference exists between the left front combination lamp and the fender of a vehicle model. The design requirement is (1.2±1.0) mm. To ensure the exterior fit meets the design requirements, this paper analyzes the issue from a dimensional perspective. PolyWorks software is used to make dimensional measurements on the beam and side panel assembly, and the headlamp is virtually installed to simulate its posture for verification. This paper also concludes the impact of the parallelism deviation of the integrated bracket mounting surface on the BIW frame on the headlamp’s posture. Combining this with the actual welding process on site, the body fixtures are adjusted and the gap interference issue between the headlamp and the fender is solued ultimately.

PolyWorks analysis software  /  Headlamp  /  Virtual matching  /  Posture  /  Dimensional chain
Zelong Zhang, Dengfeng Wang, Weichao Sun, Ruixin Zhang. Simulation and Analysis of Headlamp Posture in Dimensional Post-Matching Based on PolyWorks[J]. Automobile Technology & Material, 2024 , (12) : 16 -21 . DOI: 10.19710/J.cnki.1003-8817.20240266
Year 2024 volume Issue 12
PDF
184
46
Cite this Article
BibTeX
Article Info
doi: 10.19710/J.cnki.1003-8817.20240266
  • Online Date:2025-11-26
  • Published:2024-12-20
Article Data
Affiliations
History
Affiliations
    1 Great Wall Motors Corporation R&D Center, Baoding 071000
    2 Hebei Automobile Engineering Technology Innovation Center, Baoding 071000
References
Share
https://castjournals.cast.org.cn/joweb/qcgyycl/EN/10.19710/J.cnki.1003-8817.20240266
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数

Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)

Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT