收藏切换
Energy Consumption Evaluation Method for Heavy-Duty Trucks on Actual Roads Based on Driving Characteristic Interval Division
收藏切换
PDF
Dejun HUANG, Maojun TIAN, Hang PENG, Linyao RAN, Gan XIANG, Longping ZHANG
Chinese Journal of Automotive Engineering | 2024, 14(3) : 544 - 552
Less
收藏切换
Chinese Journal of Automotive Engineering | 2024, 14(3): 544-552
Green/Health Technologies and Test/Evaluation
Energy Consumption Evaluation Method for Heavy-Duty Trucks on Actual Roads Based on Driving Characteristic Interval Division
Full
Dejun HUANG, Maojun TIAN, Hang PENG, Linyao RAN, Gan XIANG, Longping ZHANG
Affiliations
  • China Automotive Engineering Research Institute Co., Ltd. Chongqing 401122 China
doi: 10.3969/j.issn.2095–1469.2024.03.21
Outline
收藏切换

During the actual road driving test process, strictly controlling the driving state of heavyduty trucks can be challenging, which makes it difficult to directly evaluate the energy consumption levels from the test results. Therefore, this paper proposes an energy consumption evaluation method based on the division of driving characteristic intervals. Firstly, by analyzing the distribution characteristics of test points in the China Heavyduty Commercial Vehicle Test Cycle for Truck (CHTCHT), a division scheme for the number and boundaries of speed and acceleration intervals for heavy duty trucks is proposed. Then, considering the impact of road slope, the actual road test data is filtered and used to calculate the average fuel consumption across different driving characteristic intervals. Finally, based on the cumulative driving mileage within each interval of the CHTCHT, the energy consumption evaluation results are obtained. The validation is conducted using three chassis dynamometer drum tests and two actual road driving tests. The results show that the proposed method improves the reproducibility of actual road energy consumption evaluation results for heavyduty trucks.

heavy duty trucks  /  actual road energy consumption evaluation  /  driving characteristics  /  road slope  /  interval division
Dejun HUANG, Maojun TIAN, Hang PENG, Linyao RAN, Gan XIANG, Longping ZHANG. Energy Consumption Evaluation Method for Heavy-Duty Trucks on Actual Roads Based on Driving Characteristic Interval Division[J]. Chinese Journal of Automotive Engineering, 2024 , 14 (3) : 544 -552 . DOI: 10.3969/j.issn.2095–1469.2024.03.21
Year 2024 volume 14 Issue 3
PDF
282
117
Cite this Article
BibTeX
Article Info
doi: 10.3969/j.issn.2095–1469.2024.03.21
  • Receive Date:2024-01-13
  • Online Date:2025-07-21
Article Data
Affiliations
History
  • Received:2024-01-13
  • Revised:2024-04-19
Funding
Affiliations
    China Automotive Engineering Research Institute Co., Ltd. Chongqing 401122 China
References
Share
https://castjournals.cast.org.cn/joweb/qcgcxb/EN/10.3969/j.issn.2095–1469.2024.03.21
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数

Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)

Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT