收藏切换
Review on Modeling and Control of Cathode Gas Supply System for Proton Exchange Membrane Fuel Cell
收藏切换
Shupeng Wu1, Huangjun Lü1, Zhaowei Zeng2, Xiaohua Wu1
Automotive Engineer | 2026, (4) : 10 - 18
Less
收藏切换
Automotive Engineer | 2026, (4): 10-18
• Special Topic on Key Technologies and Evaluation Methods for Fuel Cell at Xihua University •
Review on Modeling and Control of Cathode Gas Supply System for Proton Exchange Membrane Fuel Cell
Full
Shupeng Wu1, Huangjun Lü1, Zhaowei Zeng2, Xiaohua Wu1
Affiliations
  • 1.Key Laboratory of Automotive Measurement, Control and Safety of Sichuan Province, Xihua University, Chengdu 610039
  • 2.Chengdu Industry and Trade College, Chengdu 611731
Published: 2026-04-15 doi: 10.20104/j.cnki.1674-6546.20250256
Outline
收藏切换

Firstly, the paper introduces the composition and working principle of the cathode air supply system for Proton Exchange Membrane Fuel Cells (PEMFC), special requirements of fuel cells for centrifugal air compressors and the anti-surge strategies. Secondly, the current research status of modeling and control of the cathode air supply system is analyzed. Finally, based on the relevant research results, the paper summaries the key technologies that must be achieved for the use of air compressors in fuel cells, the research direction of anti-surge of air compressors, as well as the research direction and development prospects of modeling and control of the cathode air supply system for PEMFC.

Proton Exchange Membrane Fuel Cell (PEMFC)  /  Cathode gas supply system  /  Centrifugal air compressor  /  Anti-surge
吴树鹏, 吕皇君, 曾昭炜, 武小花. 质子交换膜燃料电池阴极供气系统建模与控制综述. 汽车工程师, 2026 , (4) : 10 -18 . DOI: 10.20104/j.cnki.1674-6546.20250256
Shupeng Wu, Huangjun Lü, Zhaowei Zeng, Xiaohua Wu. Review on Modeling and Control of Cathode Gas Supply System for Proton Exchange Membrane Fuel Cell[J]. Automotive Engineer, 2026 , (4) : 10 -18 . DOI: 10.20104/j.cnki.1674-6546.20250256
Year 2026 volume Issue 4
150
26
Cite this Article
BibTeX
Article Info
doi: 10.20104/j.cnki.1674-6546.20250256
  • Online Date:2026-09-20
  • Published:2026-04-15
Article Data
Affiliations
History
  • Revised:2025-12-29
Funding
Affiliations
    1.Key Laboratory of Automotive Measurement, Control and Safety of Sichuan Province, Xihua University, Chengdu 610039
    2.Chengdu Industry and Trade College, Chengdu 611731
References
Share
https://castjournals.cast.org.cn/joweb/qcgcs/EN/10.20104/j.cnki.1674-6546.20250256
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT