收藏切换
Finite Element Analysis of Stiffness and Fatigue of Automotive Rubber Bushings
收藏切换
Hua Yang, Lang Wu
Automotive Engineer | 2026, (4) : 41 - 48
Less
收藏切换
Automotive Engineer | 2026, (4): 41-48
Finite Element Analysis of Stiffness and Fatigue of Automotive Rubber Bushings
Full
Hua Yang, Lang Wu
Affiliations
  • Chengdu Xiling Power Science & Technology Incorporated Company, Chengdu 611300
Published: 2026-04-15 doi: 10.20104/j.cnki.1674-6546.20240407
Outline
收藏切换

In order to solve the problems of long development cycle, high design cost and easy fatigue damage of automotive bushings, the stiffness calculation and fatigue simulation simulation of the rear bushings of front suspension lower swing arm were carried out based on finite element software. Ogden, Mullins, and Thomas model parameters and initial crack size are obtained through the mechanical property test of rubber materials, and then the bushing is subjected to stiffness calculation and fatigue life simulation. Comparing the results of the bench test, it is found that the error of all-directional stiffness and fatigue life is less than 8%, and the location of the node where fatigue failure occurs is the same as the fatigue hotspot obtained from the calculation, which is similar to the location of the fatigue failure in the bench fatigue test, thus verifying the feasibility of the simulation.

Automotive bushings  /  Rubber  /  Finite element simulation  /  Stiffness  /  Fatigue
杨华, 吴浪. 车用橡胶衬套刚度与疲劳寿命有限元分析. 汽车工程师, 2026 , (4) : 41 -48 . DOI: 10.20104/j.cnki.1674-6546.20240407
Hua Yang, Lang Wu. Finite Element Analysis of Stiffness and Fatigue of Automotive Rubber Bushings[J]. Automotive Engineer, 2026 , (4) : 41 -48 . DOI: 10.20104/j.cnki.1674-6546.20240407
Year 2026 volume Issue 4
147
33
Cite this Article
BibTeX
Article Info
doi: 10.20104/j.cnki.1674-6546.20240407
  • Online Date:2026-09-20
  • Published:2026-04-15
Article Data
Affiliations
History
  • Revised:2024-12-17
Affiliations
    Chengdu Xiling Power Science & Technology Incorporated Company, Chengdu 611300
References
Share
https://castjournals.cast.org.cn/joweb/qcgcs/EN/10.20104/j.cnki.1674-6546.20240407
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT