收藏切换
Virtual Tuning of Automobile Suspension Jounce Bumper Based on VPG
收藏切换
PDF
Jian Cai, Zexun Wu, Yuanyuan Che, Baoguang Jia, Taimei Li, Deyuan Wang
Automotive Engineer | 2024, (1) : 37 - 42
Less
收藏切换
Automotive Engineer | 2024, (1): 37-42
Virtual Tuning of Automobile Suspension Jounce Bumper Based on VPG
Full
Jian Cai, Zexun Wu, Yuanyuan Che, Baoguang Jia, Taimei Li, Deyuan Wang
Affiliations
  • Chongqing Livan Automobile R&D Institute Co., Ltd., Chongqing 401122
Published: 2024-01-15 doi: 10.20104/j.cnki.1674-6546.20230139
Outline
收藏切换

Vehicle dynamic model and proving ground road model were built based on virtual proving ground (VPG) technology, and body fatigue & durability simulation was conducted, then an analysis were conducted to address the issue of multiple risk points and large damage values in the fatigue simulation of a vehicle project. Ultimately, it was found that excessive load on the suspension jounce bumper was the direct cause of large body damage. Based on VPG technology, virtual tuning was carried out on the jounce bumper, reducing the frequency of the jounce bumper under compression limit by increasing the jounce stoke of the bumper, thus reducing fatigue damage. The road durability test verification shows that the optimization scheme improves body durability performance and vehicle ride comfort.

Suspension jounce bumper  /  VPG  /  Body durability  /  Virtual tuning  /  PG test
Jian Cai, Zexun Wu, Yuanyuan Che, Baoguang Jia, Taimei Li, Deyuan Wang. Virtual Tuning of Automobile Suspension Jounce Bumper Based on VPG[J]. Automotive Engineer, 2024 , (1) : 37 -42 . DOI: 10.20104/j.cnki.1674-6546.20230139
Year 2024 volume Issue 1
PDF
230
101
Cite this Article
BibTeX
Article Info
doi: 10.20104/j.cnki.1674-6546.20230139
  • Online Date:2025-11-25
  • Published:2024-01-15
Article Data
Affiliations
History
  • Revised:2023-05-24
Affiliations
    Chongqing Livan Automobile R&D Institute Co., Ltd., Chongqing 401122
References
Share
https://castjournals.cast.org.cn/joweb/qcgcs/EN/10.20104/j.cnki.1674-6546.20230139
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数

Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)

Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT