收藏切换
Research on Actuality and Trends of Fuel Cell Stack Technology and Evaluation Methods
收藏切换
Xingcheng Liao1, Anlin Shen1, Daokuan Jiao2, Pengfei Ma1, Xiaorong Huang1, Xiaohua Wu1
Automotive Engineer | 2026, (4) : 1 - 9
Less
收藏切换
Automotive Engineer | 2026, (4): 1-9
• Special Topic on Key Technologies and Evaluation Methods for Fuel Cell at Xihua University •
Research on Actuality and Trends of Fuel Cell Stack Technology and Evaluation Methods
Full
Xingcheng Liao1, Anlin Shen1, Daokuan Jiao2, Pengfei Ma1, Xiaorong Huang1, Xiaohua Wu1
Affiliations
  • 1.Key Laboratory of Automotive Measurement, Control and Safety of Sichuan Province, Xihua University, Chengdu 610039
  • 2.CATARC New Energy Vehicle Test Center (Tianjin) Co., Ltd., Tianjin 300300
Published: 2026-04-15 doi: 10.20104/j.cnki.1674-6546.20250158
Outline
收藏切换

First, this paper summarizes and analyzes the key technologies and development status of different bipolar plate stacks. Secondly, the performance evaluation standards and durability evaluation methods of the stack are sorted out, and the condition test methods of current standards and universities are summarized and analyzed. Finally, the development of stack technology and performance evaluation methods are summarized and prospected, and ideas and suggestions are put forward for the essential technology research and evaluation methods of stack.

Fuel cell stack  /  Bipolar plate  /  Stack technology  /  Evaluation methods  /  Condition test
廖兴承, 沈安林, 焦道宽, 马鹏飞, 黄晓蓉, 武小花. 燃料电池堆关键技术与测评方法研究综述. 汽车工程师, 2026 , (4) : 1 -9 . DOI: 10.20104/j.cnki.1674-6546.20250158
Xingcheng Liao, Anlin Shen, Daokuan Jiao, Pengfei Ma, Xiaorong Huang, Xiaohua Wu. Research on Actuality and Trends of Fuel Cell Stack Technology and Evaluation Methods[J]. Automotive Engineer, 2026 , (4) : 1 -9 . DOI: 10.20104/j.cnki.1674-6546.20250158
Year 2026 volume Issue 4
118
27
Cite this Article
BibTeX
Article Info
doi: 10.20104/j.cnki.1674-6546.20250158
  • Online Date:2026-09-20
  • Published:2026-04-15
Article Data
Affiliations
History
  • Revised:2025-08-22
Funding
Affiliations
    1.Key Laboratory of Automotive Measurement, Control and Safety of Sichuan Province, Xihua University, Chengdu 610039
    2.CATARC New Energy Vehicle Test Center (Tianjin) Co., Ltd., Tianjin 300300
References
Share
https://castjournals.cast.org.cn/joweb/qcgcs/EN/10.20104/j.cnki.1674-6546.20250158
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT