收藏切换
Design of a Passenger Vehicle Powertrain Mounting System
收藏切换
Xingchen Zhao1, 2, Jun Lü1, Lifeng Yin1, Lei Xiao1, Chengliang Li1
Automotive Engineer | 2026, (2) : 33 - 40
Less
收藏切换
Automotive Engineer | 2026, (2): 33-40
Design of a Passenger Vehicle Powertrain Mounting System
Full
Xingchen Zhao1, 2, Jun Lü1, Lifeng Yin1, Lei Xiao1, Chengliang Li1
Affiliations
  • 1.Shiyan Dongsen Automotive Seals Co., Ltd., 442012
  • 2.Dongshi Motor Technology Group Co., Ltd., 442012
Published: 2026-02-15 doi: 10.20104/j.cnki.1674-6546.20240301
Outline
收藏切换

In order to improve vibration isolation effect of NEV powertrain mounting system, this paper proposes design flow of passenger vehicle powertrain mounting system. Next, for the design objective of a passenger vehicle, a dynamic model of powertrain mounting system is established to analyze its modal frequency and decoupling rate. Then, based on the mounting stiffness, the three-dimensional nonlinear stiffness curve of mounting is designed. Inherent frequency and strength of the mounting bracket 1st order constraint mode are obtained based on the calculation results of the mounting system 28 working conditions. The results indicate that this scheme meets requirement of design objective.

Powertrain  /  Mounting  /  Decoupling rate  /  Modal frequency
赵星辰, 吕俊, 尹立峰, 肖磊, 李承亮. 某乘用车动力总成悬置系统设计. 汽车工程师, 2026 , (2) : 33 -40 . DOI: 10.20104/j.cnki.1674-6546.20240301
Xingchen Zhao, Jun Lü, Lifeng Yin, Lei Xiao, Chengliang Li. Design of a Passenger Vehicle Powertrain Mounting System[J]. Automotive Engineer, 2026 , (2) : 33 -40 . DOI: 10.20104/j.cnki.1674-6546.20240301
Year 2026 volume Issue 2
139
33
Cite this Article
BibTeX
Article Info
doi: 10.20104/j.cnki.1674-6546.20240301
  • Online Date:2026-09-20
  • Published:2026-02-15
Article Data
Affiliations
History
  • Revised:2024-10-28
Affiliations
    1.Shiyan Dongsen Automotive Seals Co., Ltd., 442012
    2.Dongshi Motor Technology Group Co., Ltd., 442012
References
Share
https://castjournals.cast.org.cn/joweb/qcgcs/EN/10.20104/j.cnki.1674-6546.20240301
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT