收藏切换
Dust release from various small-scale belt conveyor setups discharging into a wind tunnel - experimental investigation using different limestone qualities
收藏切换
PDF
Marcus Weidemann*, Eberhard Schmidt
Particuology | 2026, 115 : 202 - 213
Less
收藏切换
Particuology | 2026, 115: 202-213
Dust release from various small-scale belt conveyor setups discharging into a wind tunnel - experimental investigation using different limestone qualities
Full
Marcus Weidemann*, Eberhard Schmidt
Affiliations
  • Institute of Particle Technology, University of Wuppertal, 42119, Wuppertal, Germany
Published: 2026-08-10 doi: 10.1016/j.partic.2026.05.016
Outline
收藏切换

To investigate the release of dust, coarse (x50.3 = 980 μm) and fine (x50.3 = 3.6 μm) limestone was discharged into a wind tunnel using a model conveyor belt. Different test setups were used to measure the dust release in different phases of the discharge. The discharge mass flow, belt speed and wind tunnel air velocity were varied. Systematic differences were found between the two size fractions. The dust release of the fine material mainly takes place during the fall, while the dust release of the coarse material is dominated by the impact on the bulk pile. For the coarse material, a model for the individual release of dust-laden coarse material particles from the literature can be used as an explanatory approach. A different explanatory approach is required to describe the release of dust from the fine material.

Dust  /  Dust release  /  Bulk material handling  /  Belt conveyor  /  Discharge
Marcus Weidemann, Eberhard Schmidt. Dust release from various small-scale belt conveyor setups discharging into a wind tunnel - experimental investigation using different limestone qualities[J]. Particuology, 2026 , 115 : 202 -213 . DOI: 10.1016/j.partic.2026.05.016
Year 2026 volume 115 Issue 0
PDF
67
12
Cite this Article
BibTeX
Article Info
doi: 10.1016/j.partic.2026.05.016
  • Receive Date:2025-07-28
  • Online Date:2026-08-20
  • Published:2026-08-10
Article Data
Affiliations
History
  • Received:2025-07-28
  • Revised:2026-04-20
  • Accepted:2026-05-19
Affiliations
    Institute of Particle Technology, University of Wuppertal, 42119, Wuppertal, Germany

Corresponding:

* E-mail address: (M. Weidemann).
References
Share
https://castjournals.cast.org.cn/joweb/partic/EN/10.1016/j.partic.2026.05.016
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数

Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)

Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT