收藏切换
Simulation study of the effect of double-layer in-wall coatings on the filtration performance of GPF
收藏切换
Zhijun Li1, Shijie Zhang1, Mingshun Liu1, Miansong Yang1, Jiguang Wang2, Shilong Li1
Transactions of CSICE | 2025, 43(5) : 443 - 450
Less
收藏切换
Transactions of CSICE | 2025, 43(5): 443-450
Simulation study of the effect of double-layer in-wall coatings on the filtration performance of GPF
Full
Zhijun Li1, Shijie Zhang1, Mingshun Liu1, Miansong Yang1, Jiguang Wang2, Shilong Li1
Affiliations
  • 1.State Key Laboratory of Engines,Tianjin University,Tianjin 300350,China
  • 2.CATARC Automotive Test Center(Kunming) Company Limited,Kunming 651700,China
Published: 2025-09-25 doi: 10.16236/j.cnki.nrjxb.202505050
Outline
收藏切换

In order to study the influence of the distribution of double-layer in-wall coatings with different thickness ratios and up-down orders in the wall thickness direction on the filtration performance of gasoline particulate filter(GPF), two layers of coatings with different coating amounts were applied in the filtration wall thickness direction, and six different double-layer in-wall coated GPF were formed by changing the up-down orders and thickness ratios. The filtration performance, particle deposition and porosity distribution at the end of filtration of these six GPF and two single-layer in-wall coated GPF were simulated. The results show that the higher the proportion of the coating thickness of the coating with the larger amount of coating to the thickness of the filter wall, the larger the initial filtration efficiency of the GPF, and the upper and lower order of the coatings has no effect on this. The initial filtration efficiency of the GPF increases by 2.50% in the case that the proportion of the coating to the filtration wall thickness increases from 1/4 to 3/4 when a larger amount of coating is located on the top, and the initial filtration efficiency of the GPF increases by 2.52% in the same case when the coating is on the bottom. Both cases of placing a larger amount of coating on the top and having a larger percentage of thickness of this coating enhance the growth rate of filtration efficiency and pressure drop of the GPF during filtration, but the former effect is more pronounced than the latter. For the design of double-layer in-wall coatings, it is recommended to place the larger amount of coating on the top and keep the thickness ratio of the coating smaller, such as 1/4 or 1/2.

gasoline particulate filter  /  double-layer in-wall coatings  /  filtration performance  /  particle deposition distribution
李志军, 张时杰, 刘明顺, 杨绵松, 王计广, 李世龙. 双层壁内涂层对GPF过滤性能影响的模拟. 内燃机学报, 2025 , 43 (5) : 443 -450 . DOI: 10.16236/j.cnki.nrjxb.202505050
Zhijun Li, Shijie Zhang, Mingshun Liu, Miansong Yang, Jiguang Wang, Shilong Li. Simulation study of the effect of double-layer in-wall coatings on the filtration performance of GPF[J]. Transactions of CSICE, 2025 , 43 (5) : 443 -450 . DOI: 10.16236/j.cnki.nrjxb.202505050
Year 2025 volume 43 Issue 5
4
1
Cite this Article
BibTeX
Article Info
doi: 10.16236/j.cnki.nrjxb.202505050
  • Receive Date:2024-12-15
  • Online Date:2026-11-05
  • Published:2025-09-25
Article Data
Affiliations
History
  • Received:2024-12-15
  • Revised:2025-04-18
Funding
Affiliations
    1.State Key Laboratory of Engines,Tianjin University,Tianjin 300350,China
    2.CATARC Automotive Test Center(Kunming) Company Limited,Kunming 651700,China
References
Share
https://castjournals.cast.org.cn/joweb/nrjxb/EN/10.16236/j.cnki.nrjxb.202505050
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT