收藏切换
Comparative Analysis of Emission Characteristics of DPF and CDPF Active Regeneration
收藏切换
PDF
Zhongwei Meng1, 2, Bosong Zeng1, Gemeng Ran1, 2, Zhao Chen1
Transactions of CSICE | 2024, 42(1) : 35 - 43
Less
收藏切换
Transactions of CSICE | 2024, 42(1): 35-43
Comparative Analysis of Emission Characteristics of DPF and CDPF Active Regeneration
Full
Zhongwei Meng1, 2, Bosong Zeng1, Gemeng Ran1, 2, Zhao Chen1
Affiliations
  • 1.Key Laboratory of Fluid and Power Machinery,Ministry of Education,Xihua University,Chengdu 610039,China
  • 2.Vehicle Measurement,Control and Safety Key Laboratory of Sichuan Province,Xihua University,Chengdu 610039,China
doi: 10.16236/j.cnki.nrjxb.202401005
Outline
收藏切换

Based on the external heating source regeneration bench and particle loading device,the emission characteristics of outlet gas and particle during active regeneration of diesel particulate filter(DPF)and catalytic DPF(CDPF)under different regeneration temperature and carbon(Printex-U,PU)loading were studied. The results show that the coating of catalyst(Pt)is conducive to the oxidation of PU. Under the same PU loading,CDPF is more likely to produce temperature peaks,and the regeneration efficiency is slightly higher than DPF. DPF regeneration process is accompanied by higher volume fraction CO emission,and a lower concentration nuclear mode particles emission window will appear in the heating stage,and there is almost no particle release in the subsequent regeneration stage. There is almost no CO generation in the regeneration process of CDPF,but a large number of small particles below 30nm will be released in the regeneration stage,and the particle concentration at the outlet of CDPF will gradually increase with the increase of regeneration temperature and PU loading. DPF and CDPF have different optimization windows during regeneration,which is conducive to reducing particulate emissions and maintaining high regeneration efficiency.

diesel particulate filter  /  active regeneration  /  gas emissions  /  particulate emissions
Zhongwei Meng, Bosong Zeng, Gemeng Ran, Zhao Chen. Comparative Analysis of Emission Characteristics of DPF and CDPF Active Regeneration[J]. Transactions of CSICE, 2024 , 42 (1) : 35 -43 . DOI: 10.16236/j.cnki.nrjxb.202401005
Year 2024 volume 42 Issue 1
PDF
243
116
Cite this Article
BibTeX
Article Info
doi: 10.16236/j.cnki.nrjxb.202401005
  • Receive Date:2022-11-05
  • Online Date:2025-12-11
Article Data
Affiliations
History
  • Received:2022-11-05
  • Revised:2023-05-17
Funding
Affiliations
    1.Key Laboratory of Fluid and Power Machinery,Ministry of Education,Xihua University,Chengdu 610039,China
    2.Vehicle Measurement,Control and Safety Key Laboratory of Sichuan Province,Xihua University,Chengdu 610039,China
References
Share
https://castjournals.cast.org.cn/joweb/nrjxb/EN/10.16236/j.cnki.nrjxb.202401005
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数

Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)

Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT