收藏切换
Simulation and experimental investigation of canister purge control strategy of gasoline engine
收藏切换
Weiqiang Liu1, Xuetong Lian1, Zhenxiao Bai1, Liangwu Rao1, Jinke Gong2
Transactions of CSICE | 2025, 43(1) : 88 - 95
Less
收藏切换
Transactions of CSICE | 2025, 43(1): 88-95
Simulation and experimental investigation of canister purge control strategy of gasoline engine
Full
Weiqiang Liu1, Xuetong Lian1, Zhenxiao Bai1, Liangwu Rao1, Jinke Gong2
Affiliations
  • 1.Research & Design Center,Guangzhou Automobile Group Company Limited,Guangzhou 511434,China
  • 2.State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body,Hunan University,Changsha 410082,China
Published: 2025-01-25 doi: 10.16236/j.cnki.nrjxb.202501011
Outline
收藏切换

Based on Simulink platform, a gasoline canister purge control strategy model was built. The model included modules like target purge rate calculation, target purge flow calculation and solenoid valve flow characteristic calibration. Model accuracy and air-fuel ratio control performance were verified on a revolving drum test table with flow gauge. Further, the characteristic parameters of control strategy were optimized based on the built model in order to increase purge flow. It shows that the accumulative purge flow during whole cycle is 402.69L and 373.62L for experiment and simulation respectively with 7.78% deviation. Regular purge rate factor, solenoid valve opening speed, limitation of solenoid valve maximum opening and initial purge rate factor all have significant impacts to canister purge flow independently. After applying comprehensive optimization of characteristic parameters, accumulative purge flow rate increases from 373.62L to 499.61L with superior control performance of air-fuel ratio. This research enlightens control strategy design of the gasoline canister to increase purge flow under the premise of satisfied air-fuel ratio control.

gasoline engine  /  canister purge  /  control strategy  /  purge flow simulation  /  air-fuel ratio control
刘伟强, 连学通, 白振霄, 饶良武, 龚金科. 汽油机碳罐冲洗控制策略仿真与试验. 内燃机学报, 2025 , 43 (1) : 88 -95 . DOI: 10.16236/j.cnki.nrjxb.202501011
Weiqiang Liu, Xuetong Lian, Zhenxiao Bai, Liangwu Rao, Jinke Gong. Simulation and experimental investigation of canister purge control strategy of gasoline engine[J]. Transactions of CSICE, 2025 , 43 (1) : 88 -95 . DOI: 10.16236/j.cnki.nrjxb.202501011
Year 2025 volume 43 Issue 1
8
4
Cite this Article
BibTeX
Article Info
doi: 10.16236/j.cnki.nrjxb.202501011
  • Receive Date:2024-03-12
  • Online Date:2026-11-06
  • Published:2025-01-25
Article Data
Affiliations
History
  • Received:2024-03-12
  • Revised:2024-09-17
Funding
Affiliations
    1.Research & Design Center,Guangzhou Automobile Group Company Limited,Guangzhou 511434,China
    2.State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body,Hunan University,Changsha 410082,China
References
Share
https://castjournals.cast.org.cn/joweb/nrjxb/EN/10.16236/j.cnki.nrjxb.202501011
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT