收藏切换
Simulation of the working process of the BOG twin‑screw compressor based on Matlab-PDE toolbox thermal-fluid-structure coupling method
收藏切换
Yuhang ZHOU1, Yuli WANG1, 2, Anna DIAO2, Yi GUO1, Jianmei FENG1
Fluid Machinery | 2026, 54(5) : 94 - 101
Less
收藏切换
Fluid Machinery | 2026, 54(5): 94-101
Simulation of the working process of the BOG twin‑screw compressor based on Matlab-PDE toolbox thermal-fluid-structure coupling method
Full
Yuhang ZHOU1, Yuli WANG1, 2, Anna DIAO2, Yi GUO1, Jianmei FENG1
Affiliations
  • 1Xi'an Jiaotong University,Xi'an 710049,China
  • 2Shanghai Marine Diesel Engine Research Institute,Shanghai 201108,China
Published: 2026-05-30 doi: 10.3969/j.issn.1005-0329.2026.05.011
Outline
收藏切换

To address the problem of excessive time cost when adopting fluid-structure interaction CFD simulations to study the effect of low‑temperature characteristics of boil‑off gas (BOG) on screw compressor efficiency,this study establishes a numerical model of a twin‑screw compressor using MATLAB.The PDE toolbox is employed to calculate the temperature distribution and thermal deformation of the screw rotors.The new clearance caused by rotor deformation is then incorporated into the numerical model to obtain the compressor efficiency considering rotor deformation.The computation time of this process is approximately 1/100 of that required for CFD simulations,greatly reducing the time cost.The numerical results were compared with those from an experimentally validated CFD model,and the errors in volumetric efficiency and isentropic efficiency were both within 3%.Furthermore,a low‑temperature intake test rig was constructed to measure volumetric efficiency at different intake temperatures.The maximum error between the measured data and the numerical results was within 5%,thereby verifying the reliability of the model.Based on the model,the influence of rotational speed on compressor performance was analyzed.The results show that as the rotational speed increases from 4 000 r/min to 10 000 r/min,the volumetric efficiency rises from 55.1% to 73.2%.The isentropic efficiency first increases and then decreases with rotational speed,reaching a maximum value of 62.2% at 8 000 r/min.This model can quickly and accurately predict the performance of the BOG twin‑screw compressor under various operating conditions,providing a reference for the efficiency design and optimization of high‑speed twin‑screw compressors.

twin‑screw compressor  /  BOG  /  numerical model  /  rotor deformation  /  thermal-fluid-structure coupling
周宇航, 王玉莉, 刁安娜, 郭怡, 冯健美. 基于Matlab-PDE toolbox热流固耦合仿真方法的蒸发气螺杆压缩机工作过程研究. 流体机械, 2026 , 54 (5) : 94 -101 . DOI: 10.3969/j.issn.1005-0329.2026.05.011
Yuhang ZHOU, Yuli WANG, Anna DIAO, Yi GUO, Jianmei FENG. Simulation of the working process of the BOG twin‑screw compressor based on Matlab-PDE toolbox thermal-fluid-structure coupling method[J]. Fluid Machinery, 2026 , 54 (5) : 94 -101 . DOI: 10.3969/j.issn.1005-0329.2026.05.011
Year 2026 volume 54 Issue 5
85
31
Cite this Article
BibTeX
Article Info
doi: 10.3969/j.issn.1005-0329.2026.05.011
  • Receive Date:2025-10-15
  • Online Date:2026-10-22
  • Published:2026-05-30
Article Data
Affiliations
History
  • Received:2025-10-15
  • Revised:2026-04-13
Affiliations
    1Xi'an Jiaotong University,Xi'an 710049,China
    2Shanghai Marine Diesel Engine Research Institute,Shanghai 201108,China
References
Share
https://castjournals.cast.org.cn/joweb/ltjx/EN/10.3969/j.issn.1005-0329.2026.05.011
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT