收藏切换
Experimental study on atomization characteristics of a compact micro‑mist nozzle
收藏切换
Jindong YAN, Hua CHEN, Rui ZHOU, Wenlong CHENG
Fluid Machinery | 2026, 54(1) : 1 - 9
Less
收藏切换
Fluid Machinery | 2026, 54(1): 1-9
Experimental study on atomization characteristics of a compact micro‑mist nozzle
Full
Jindong YAN, Hua CHEN, Rui ZHOU, Wenlong CHENG
Affiliations
  • Department of Thermal Science and Energy Engineering,University of Science and Technology of China,Hefei 230027,China
Published: 2026-01-30 doi: 10.3969/j.issn.1005-0329.2026.01.001
Outline
收藏切换

To address the challenges of lightweight and compact design in current spray devices caused by complex internal flow channel structures,multiple liquid supply pipelines and interfaces,and large space occupation,a nozzle structure design concept based on the integration of the inlet channel,swirl chamber,and orifice was proposed.A compact micro‑mist nozzle with a thickness of 5 mm was designed,and an experimental setup for measuring spray characteristics was established to investigate the influence of the compact micro‑mist nozzle's geometric structural parameters on atomization characteristics.The research shows that the flow rate and spray angle are significantly affected by the orifice diameter.Increasing the swirl chamber diameter reduces the liquid film breakup length,which is beneficial for achieving the primary atomization process within a shorter distance.At a spray height of 15 mm,the peak axial velocity of the compact micro‑mist nozzle is greater than 10 m/s,occurring inside the spray cone.When the swirl chamber diameter is small,the axial velocity proportion of droplets at the spray center is the largest.When the orifice diameter is large,the decay of the axial velocity proportion along the radial direction slows down.The sauter mean diameter of droplets from the compact micro‑mist nozzle is less than 40 μm.The droplet size and droplet number density distribution are less affected by the swirl chamber.An increase in orifice diameter results in a 25% increase in the proportion of droplets with a size below 20 μm.This study provides a new approach for achieving integrated and highly compact designs of atomization devices.

compact nozzle  /  atomization characteristics  /  integrated design  /  micro‑mist atomization  /  droplet size distribution
闫锦东, 陈华, 周睿, 程文龙. 一种紧凑型微雾喷嘴雾化特性的试验研究. 流体机械, 2026 , 54 (1) : 1 -9 . DOI: 10.3969/j.issn.1005-0329.2026.01.001
Jindong YAN, Hua CHEN, Rui ZHOU, Wenlong CHENG. Experimental study on atomization characteristics of a compact micro‑mist nozzle[J]. Fluid Machinery, 2026 , 54 (1) : 1 -9 . DOI: 10.3969/j.issn.1005-0329.2026.01.001
Year 2026 volume 54 Issue 1
86
32
Cite this Article
BibTeX
Article Info
doi: 10.3969/j.issn.1005-0329.2026.01.001
  • Receive Date:2025-06-07
  • Online Date:2026-10-22
  • Published:2026-01-30
Article Data
Affiliations
History
  • Received:2025-06-07
  • Revised:2025-12-19
Affiliations
    Department of Thermal Science and Energy Engineering,University of Science and Technology of China,Hefei 230027,China
References
Share
https://castjournals.cast.org.cn/joweb/ltjx/EN/10.3969/j.issn.1005-0329.2026.01.001
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT