收藏切换
Wear analysis and prevention‑control of cyclone separators in catalytic cracking units
收藏切换
Bin YU1, Junfeng ZHOU1, Genfu XU1, Fan CHEN3, Zaixiang QIN1, Chenhang JIANG1, Yanlei LIU1, Haozhe JIN2
Fluid Machinery | 2025, 53(7) : 104 - 110
Less
收藏切换
Fluid Machinery | 2025, 53(7): 104-110
Wear analysis and prevention‑control of cyclone separators in catalytic cracking units
Full
Bin YU1, Junfeng ZHOU1, Genfu XU1, Fan CHEN3, Zaixiang QIN1, Chenhang JIANG1, Yanlei LIU1, Haozhe JIN2
Affiliations
  • 1Hangzhou Special Equipment Institute,Hangzhou 310051,China
  • 2The Institute of Flow-Induced Corrosion,Zhejiang;Sci-Tech University,Hangzhou 310018,China
  • 3Zhejiang Wynca Momentive Silicone Co.,Ltd.,Hangzhou 311243,China
Published: 2025-07-30 doi: 10.3969/j.issn.1005-0329.2025.07.014
Outline
收藏切换

To address wear issues in a catalytic cracking unit cyclone separator,a gas‑solid two‑phase erosion mathematical model was established.Numerical simulations reproduced distribution characteristics of flow parameters including velocity fields and wear rates under typical operating conditions.Combined with field failure cases,erosion mechanisms were analyzed and control solutions proposed.Results show the swirler internal flow exhibits a dual‑layer rotational structure with outer downward flow and inner upward flow.Wall thinning primarily results from combined cutting wear and deformation wear.Silica particles continuously impact the swirler top at low angles,causing severe wear with a wear rate of 6.02×10-9 kg/(m²·s).During spiral downward movement,particles cause cutting wear on the cylinder wall.Reduced motion radius increases centrifugal force,leading to severe impact wear at the underflow orifice with a wear rate of 5.52×10-9 kg/(m²·s).Numerical results show high consistency with field cases.Wear‑resistant electrode overlay welding extends equipment life by 3~6 months,while alumina ceramic lining extends life by over 10 months.The established wear analysis method and control strategy can be applied to failure assessment and life optimization of cyclone separator wall thinning.

cyclone separator  /  numerical prediction  /  failure mechanism  /  wear prevention and control
余兵, 周俊锋, 许根富, 陈凡, 秦仔祥, 蒋诚航, 刘延雷, 金浩哲. 催化裂化装置旋风分离器磨损分析及防控. 流体机械, 2025 , 53 (7) : 104 -110 . DOI: 10.3969/j.issn.1005-0329.2025.07.014
Bin YU, Junfeng ZHOU, Genfu XU, Fan CHEN, Zaixiang QIN, Chenhang JIANG, Yanlei LIU, Haozhe JIN. Wear analysis and prevention‑control of cyclone separators in catalytic cracking units[J]. Fluid Machinery, 2025 , 53 (7) : 104 -110 . DOI: 10.3969/j.issn.1005-0329.2025.07.014
Year 2025 volume 53 Issue 7
68
20
Cite this Article
BibTeX
Article Info
doi: 10.3969/j.issn.1005-0329.2025.07.014
  • Receive Date:2024-08-23
  • Online Date:2026-10-20
  • Published:2025-07-30
Article Data
Affiliations
History
  • Received:2024-08-23
  • Revised:2025-02-16
Affiliations
    1Hangzhou Special Equipment Institute,Hangzhou 310051,China
    2The Institute of Flow-Induced Corrosion,Zhejiang;Sci-Tech University,Hangzhou 310018,China
    3Zhejiang Wynca Momentive Silicone Co.,Ltd.,Hangzhou 311243,China
References
Share
https://castjournals.cast.org.cn/joweb/ltjx/EN/10.3969/j.issn.1005-0329.2025.07.014
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT