收藏切换
Design and visualization testing study of high‑speed gas‑liquid multiphase booster pump
收藏切换
Dong DONG1, 2, Xiaojun LI1, Ruirong YU3, Gongdie XIE3, Xiaoduo LI3, Zhangyi YE3
Fluid Machinery | 2025, 53(10) : 1 - 9
Less
收藏切换
Fluid Machinery | 2025, 53(10): 1-9
Design and visualization testing study of high‑speed gas‑liquid multiphase booster pump
Full
Dong DONG1, 2, Xiaojun LI1, Ruirong YU3, Gongdie XIE3, Xiaoduo LI3, Zhangyi YE3
Affiliations
  • 1Zhejiang Key Laboratory of Multiflow and Fluid Machinery,Zhejiang Sci‑Tech University,Hangzhou 310018,China
  • 2Xinxiang Aviation Industry (Group) Co.,Ltd.,Xinxiang 453003,China
  • 3Ebara Great Pumps Co.,Ltd.,Wenzhou 325204,China
Published: 2025-10-31 doi: 10.3969/j.issn.1005-0329.2025.10.001
Outline
收藏切换

To address the performance failure of conventional centrifugal pumps under high gas content multiphase transportation conditions,a high‑speed gas‑liquid multiphase booster pump covering conventional centrifugal pump performance parameters was designed.Maintaining bubbly inflow and through visualization testing,its performance and internal flow characteristics under variable conditions were analyzed.The results show that the pump can transport mixed medium with inlet gas volume fraction of 55% under rated conditions;as inlet gas volume fraction increases,the pump head coefficient shows a nonlinear decreasing trend,and the inlet flow pattern gradually transitions from bubbly flow Ⅰ to bubbly flow Ⅱ,Ⅲ,Ⅳ.When the flow pattern develops to bubbly flow Ⅲ,the pump performance loss and inlet flow pattern transition delay reach their maximum;increasing rotational speed can achieve up to 6.65% maximum inlet flow pattern transition delay rate and enhance the pump's gas mixing resistance capability;small liquid flow rate helps slow down performance degradation under high inlet gas volume fraction conditions,while increasing liquid flow rate intensifies gas‑liquid separation inside the pump;reducing liquid flow rate can achieve up to 7.04% maximum inlet flow pattern transition delay rate.This research provides theoretical support for the optimal design and efficient operation of gas‑liquid multiphase booster pumps.

gas‑liquid multiphase booster pump  /  inlet gas volume fraction  /  inlet flow pattern transition  /  bubble evolution  /  visualization testing
董栋, 李晓俊, 虞瑞荣, 谢功耋, 李晓多, 叶张益. 高速气液混输增压泵设计及可视化测试研究. 流体机械, 2025 , 53 (10) : 1 -9 . DOI: 10.3969/j.issn.1005-0329.2025.10.001
Dong DONG, Xiaojun LI, Ruirong YU, Gongdie XIE, Xiaoduo LI, Zhangyi YE. Design and visualization testing study of high‑speed gas‑liquid multiphase booster pump[J]. Fluid Machinery, 2025 , 53 (10) : 1 -9 . DOI: 10.3969/j.issn.1005-0329.2025.10.001
Year 2025 volume 53 Issue 10
47
13
Cite this Article
BibTeX
Article Info
doi: 10.3969/j.issn.1005-0329.2025.10.001
  • Receive Date:2025-01-09
  • Online Date:2026-10-20
  • Published:2025-10-31
Article Data
Affiliations
History
  • Received:2025-01-09
  • Revised:2025-07-20
Affiliations
    1Zhejiang Key Laboratory of Multiflow and Fluid Machinery,Zhejiang Sci‑Tech University,Hangzhou 310018,China
    2Xinxiang Aviation Industry (Group) Co.,Ltd.,Xinxiang 453003,China
    3Ebara Great Pumps Co.,Ltd.,Wenzhou 325204,China
References
Share
https://castjournals.cast.org.cn/joweb/ltjx/EN/10.3969/j.issn.1005-0329.2025.10.001
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT