收藏切换
Experimental study of pressure drop in the first type of leakage channel of single screw compressor
收藏切换
Yeqiang ZHANG1, 2, Shuaibo LI1, 2, Kangli LI1, 2, Xueling ZHANG1, 2, Kai CHEN1, 2, Yanling WANG1, 2
Fluid Machinery | 2025, 53(6) : 9 - 15
Less
收藏切换
Fluid Machinery | 2025, 53(6): 9-15
Experimental study of pressure drop in the first type of leakage channel of single screw compressor
Full
Yeqiang ZHANG1, 2, Shuaibo LI1, 2, Kangli LI1, 2, Xueling ZHANG1, 2, Kai CHEN1, 2, Yanling WANG1, 2
Affiliations
  • 1School of Energy and Power Engineering,Zhengzhou University of Light Industry,Zhengzhou 450002,China
  • 2Henan International Joint Laboratory for Energy Efficiency Conversion and Utilization,Zhengzhou 450002,China
Published: 2025-06-30 doi: 10.3969/j.issn.1005-0329.2025.06.002
Outline
收藏切换

In order to investigate the leakage law of gas-liquid two‑phase flow in the first type leakage channel of single screw compressor under different conditions,the first type of leakage channel of a single screw compressor was simplified as a narrow channel,and the meshing clearance was the height.Using nitrogen as the gas phase medium and deionized water and glycerol solution as the liquid phase medium to study the influence low of pressure loss of gas-liquid two‑phase flow in narrow channels with the changes of gas‑liquid velocity,channel height and liquid viscosity.The results show that the pressure drop increases with the increase of gas‑liquid velocity,and the influence of liquid velocity on pressure drop is significantly greater than that of gas velocity.At a same gas‑liquid velocity,the pressure drop rapidly decreases with the increase of channel height.The pressure drop decreases the most when the height increases from 0.03 mm to 0.05 mm,and the pressure drop decreases less when the height increases from 0.05 mm to 0.08 mm.When the liquid phase velocity increases from 0.14 m/s to 0.28 m/s,the pressure drop of water,20% glycerol solution and 40% glycerol solution increase from 3.01 kPa,4.39 kPa and 8.61 kPa to 5.81 kPa,7.80 kPa and 15.5 kPa,respectively.A new correlation equation is fitted by modifying the Chisholm parameters of the split phase flow model,which can effectively predict the pressure drop in narrow channels with heights ranging from 0.01 mm to 0.08 mm,and a maximum deviation of no more than 25%.The research can provide theoretical reference for the design and manufacturing of single screw compressors.

single screw compressor  /  the first type of leakage channel  /  narrow channels  /  pressure drop
张业强, 李帅博, 李康利, 张雪龄, 陈凯, 王燕令. 单螺杆压缩机第一类泄漏通道内压降的试验研究. 流体机械, 2025 , 53 (6) : 9 -15 . DOI: 10.3969/j.issn.1005-0329.2025.06.002
Yeqiang ZHANG, Shuaibo LI, Kangli LI, Xueling ZHANG, Kai CHEN, Yanling WANG. Experimental study of pressure drop in the first type of leakage channel of single screw compressor[J]. Fluid Machinery, 2025 , 53 (6) : 9 -15 . DOI: 10.3969/j.issn.1005-0329.2025.06.002
Year 2025 volume 53 Issue 6
54
11
Cite this Article
BibTeX
Article Info
doi: 10.3969/j.issn.1005-0329.2025.06.002
  • Receive Date:2024-10-04
  • Online Date:2026-10-20
  • Published:2025-06-30
Article Data
Affiliations
History
  • Received:2024-10-04
  • Revised:2025-03-25
Affiliations
    1School of Energy and Power Engineering,Zhengzhou University of Light Industry,Zhengzhou 450002,China
    2Henan International Joint Laboratory for Energy Efficiency Conversion and Utilization,Zhengzhou 450002,China
References
Share
https://castjournals.cast.org.cn/joweb/ltjx/EN/10.3969/j.issn.1005-0329.2025.06.002
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT