收藏切换
Experimental study on influence of quantity of oil injection quantity on heat transfer performance of screw air compressor
收藏切换
Yanhui ZHOU1, Fusong LI2, Yourong LAI1, Haixin LI1, Weiqiang WU1
Fluid Machinery | 2025, 53(6) : 16 - 20
Less
收藏切换
Fluid Machinery | 2025, 53(6): 16-20
Experimental study on influence of quantity of oil injection quantity on heat transfer performance of screw air compressor
Full
Yanhui ZHOU1, Fusong LI2, Yourong LAI1, Haixin LI1, Weiqiang WU1
Affiliations
  • 1Guangdong Eco-air Equipment Technology Co.,Ltd.,Foshan 528175,China
  • 2Liuzhou Institute of Technology,Liuzhou 545616,China
Published: 2025-06-30 doi: 10.3969/j.issn.1005-0329.2025.06.003
Outline
收藏切换

In order to quantitatively explore the influence of cyclic oil injection quantity on the heat transfer performance of screw air compressors,experiments were conducted to study the effects of changing oil injection quantity and suction temperature on exhaust temperature,overall temperature difference,inlet and outlet oil temperature of oil coolers,logarithmic mean temperature difference and convective heat transfer coefficient under different operating conditions.At the same time,the curve of convective heat transfer coefficient and oil injection quantity was fitted using experimental data.The results show that the oil injection quantity and input power should be accurately matched under the rated exhaust pressure at full load.When the oil injection quantity decreases from 262 L/min to 134 L/min,the convective heat transfer coefficient of the oil cooler to decreases by 12.4%,the temperature difference of the lubricating oil will increase from 16.0 ℃ to 29.8 ℃,resulting in an 8.3% decrease in the logarithmic mean temperature difference of convective heat transfer under the original calculation conditions,increasing exhaust temperature.The research can provide theoretical guidance for solving the problem of high exhaust temperature in screw air compressor.

screw air compressor  /  suction temperature  /  discharge temperature  /  heat transfer  /  oil njection quantity
周艳辉, 李福送, 赖友荣, 黎海鑫, 伍伟强. 喷油量对螺杆空压机换热性能影响的试验研究. 流体机械, 2025 , 53 (6) : 16 -20 . DOI: 10.3969/j.issn.1005-0329.2025.06.003
Yanhui ZHOU, Fusong LI, Yourong LAI, Haixin LI, Weiqiang WU. Experimental study on influence of quantity of oil injection quantity on heat transfer performance of screw air compressor[J]. Fluid Machinery, 2025 , 53 (6) : 16 -20 . DOI: 10.3969/j.issn.1005-0329.2025.06.003
Year 2025 volume 53 Issue 6
110
42
Cite this Article
BibTeX
Article Info
doi: 10.3969/j.issn.1005-0329.2025.06.003
  • Receive Date:2024-07-12
  • Online Date:2026-10-20
  • Published:2025-06-30
Article Data
Affiliations
History
  • Received:2024-07-12
  • Revised:2024-12-13
Affiliations
    1Guangdong Eco-air Equipment Technology Co.,Ltd.,Foshan 528175,China
    2Liuzhou Institute of Technology,Liuzhou 545616,China
References
Share
https://castjournals.cast.org.cn/joweb/ltjx/EN/10.3969/j.issn.1005-0329.2025.06.003
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT