收藏切换
Research on the internal flow state of bent pipes and optimization of component drag reductio
收藏切换
Jie WANG, Chongfang SONG, Wuxuan PAN, Yajing YAN, Ke ZHAO
Fluid Machinery | 2025, 53(1) : 68 - 75
Less
收藏切换
Fluid Machinery | 2025, 53(1): 68-75
Research on the internal flow state of bent pipes and optimization of component drag reductio
Full
Jie WANG, Chongfang SONG, Wuxuan PAN, Yajing YAN, Ke ZHAO
Affiliations
  • 1School of Civil Engineering, Taiyuan University of Technology, Taiyuan 030024, China
Published: 2025-01-30 doi: 10.3969/j.issn.1005-0329.2025.01.009
Outline
收藏切换

In order to provide theoretical guidance for pipeline layout and optimized operation in engineering design, and reduce building operation energy consumption, the variations in local resistance coefficients, fluid motion states, and viscous dissipation of elbows under different pipe diameters and velocities were compared by the method of combining the experiments and numerical simulation, and the groove method was utilized to optimize the components of the elbows. The results reveal that as the pipe diameter increases, the influence of deformed components on the fluid within the elbow gradually decreases, and the area of the low-velocity zone in both the turning section and downstream straight pipe section gradually decreases. At an inlet velocity of 1.1 m/s, elbows of varying diameters exhibit deviations from the established power function law regarding local resistance coefficients. Specifically, elbows ranging from DN40 to DN65 demonstrate nearly identical resistance coefficients, as do those from DN100 to DN125. This phenomenon is attributed to the internal fluid dynamics and stress distribution within the elbows. Using the aforementioned theoretical study for component optimization, adding grooves in the separation area of the material wall can reduce the local resistance loss of the elbow, reduce the range of low-velocity areas, and reduce mechanical energy consumption as well. In the elbow with added grooves, the optimization of local resistance is most significant at a smaller inlet flow rate of v=0.5 m/s, the local resistance is reduced by 63.96%. These research findings offer valuable insights for the design layout and structural optimization of elbows in engineering applications.

elbow  /  local resistance coefficient  /  viscous dissipation  /  resistance reduction optimization
王捷, 宋翀芳, 潘武轩, 闫亚婧, 赵可. 弯管内部流场及减阻优化研究. 流体机械, 2025 , 53 (1) : 68 -75 . DOI: 10.3969/j.issn.1005-0329.2025.01.009
Jie WANG, Chongfang SONG, Wuxuan PAN, Yajing YAN, Ke ZHAO. Research on the internal flow state of bent pipes and optimization of component drag reductio[J]. Fluid Machinery, 2025 , 53 (1) : 68 -75 . DOI: 10.3969/j.issn.1005-0329.2025.01.009
Year 2025 volume 53 Issue 1
45
8
Cite this Article
BibTeX
Article Info
doi: 10.3969/j.issn.1005-0329.2025.01.009
  • Receive Date:2024-02-01
  • Online Date:2026-10-15
  • Published:2025-01-30
Article Data
Affiliations
History
  • Received:2024-02-01
  • Revised:2024-05-08
Affiliations
    1School of Civil Engineering, Taiyuan University of Technology, Taiyuan 030024, China
References
Share
https://castjournals.cast.org.cn/joweb/ltjx/EN/10.3969/j.issn.1005-0329.2025.01.009
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT