收藏切换
Research on serialized design method and application of blower volutes
收藏切换
Yang WANG1, 2, Cuimin BAO1, 2, Yiwen LI1, 2, Xiao GUAN1, 2
Fluid Machinery | 2026, 54(5) : 102 - 108
Less
收藏切换
Fluid Machinery | 2026, 54(5): 102-108
Research on serialized design method and application of blower volutes
Full
Yang WANG1, 2, Cuimin BAO1, 2, Yiwen LI1, 2, Xiao GUAN1, 2
Affiliations
  • 1ShenGu Group Co.,Ltd.,Shenyang 110869,China
  • 2Dalian Turbomachinery Technology Development Co.,Ltd.,Dalian 116024,China
Published: 2026-05-30 doi: 10.3969/j.issn.1005-0329.2026.05.012
Outline
收藏切换

To address the issues of repetitive design,high cost,and optimization difficulties in the series development of blower volutes caused by a single design process and limited software functionality,an adjustable partition plate is adopted to achieve serialized structural design of the volute.By optimizing the width and height of the partition plate to adapt to the flow channel cross‑section requirements of different volutes,the maximum sharing of volute components across blower units is realized.Combined with CFD calculations and flow field analysis,the performance quality and operating condition adaptability of the serialized products are ensured,and the reliability of the numerical simulation is verified through experiments.The results show that when using the adjustable partition plate for volute serialization design,the optimal range for the partition plate height D4/D2 is 1.65~1.72;when the partition plate width is greater than 5 mm,optimizing its structure can improve the flow field performance of the serialized volute.The blower units adopting the serialized volute structure have a wide operating range,with relative variability efficiencies of each unit all exceeding 82.5%,and total pressure ratios greater than 1.8,and they have been well applied in wastewater treatment energy‑saving projects.This study can provide a reference for the serialized design of blower volutes.

blower  /  volute serialization  /  aerodynamic design  /  numerical simulation
王杨, 包翠敏, 李艺雯, 关晓. 鼓风机蜗壳系列化设计方法与应用研究. 流体机械, 2026 , 54 (5) : 102 -108 . DOI: 10.3969/j.issn.1005-0329.2026.05.012
Yang WANG, Cuimin BAO, Yiwen LI, Xiao GUAN. Research on serialized design method and application of blower volutes[J]. Fluid Machinery, 2026 , 54 (5) : 102 -108 . DOI: 10.3969/j.issn.1005-0329.2026.05.012
Year 2026 volume 54 Issue 5
64
24
Cite this Article
BibTeX
Article Info
doi: 10.3969/j.issn.1005-0329.2026.05.012
  • Receive Date:2026-01-07
  • Online Date:2026-10-22
  • Published:2026-05-30
Article Data
Affiliations
History
  • Received:2026-01-07
  • Revised:2026-05-10
Affiliations
    1ShenGu Group Co.,Ltd.,Shenyang 110869,China
    2Dalian Turbomachinery Technology Development Co.,Ltd.,Dalian 116024,China
References
Share
https://castjournals.cast.org.cn/joweb/ltjx/EN/10.3969/j.issn.1005-0329.2026.05.012
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT