收藏切换
Study on the influence of blade outlet angle on the internal flow of centrifugal pumps
收藏切换
Sicheng YE1, Qile REN2, Guangbing LIU2, Tian XIA2, Shaoyi YAO1, Xiaoqi JIA1, 2
Fluid Machinery | 2026, 54(3) : 82 - 90
Less
收藏切换
Fluid Machinery | 2026, 54(3): 82-90
Study on the influence of blade outlet angle on the internal flow of centrifugal pumps
Full
Sicheng YE1, Qile REN2, Guangbing LIU2, Tian XIA2, Shaoyi YAO1, Xiaoqi JIA1, 2
Affiliations
  • 1School of Mechanical Engineering,Zhejiang Sci-Tech University,Hangzhou 310018,China
  • 2Hefei General Machinery Research Institute,Hefei 230031,China
Published: 2026-03-30 doi: 10.3969/j.issn.1005-0329.2026.03.010
Outline
收藏切换

To investigate the mechanism of how the blade exit angle affects the internal flow and energy loss in centrifugal pumps,five types of impellers with blade outlet angles of 20°,23°,26°,29°,and 32° were studied.A combined approach of numerical simulation and experiment was adopted to investigate the hydraulic performance,energy loss,and pressure fluctuation of a centrifugal pump,aiming to reveal the underlying correlation between its internal flow characteristics and pressure fluctuations under different blade outlet angles.The results show that at a design flow rate Qd=1.5 m ³/h,as the blade outlet angle increases,the head and shaft power increase,and the efficiency decreases from 69.71% to 69.38%;the high energy loss areas with entropy production rates greater than 20 kW/(K⋅m³) are mainly concentrated at the inlet and outlet of the impeller,the back pressure surface of the blades,and the tongue of the snail shell,and the energy loss in the wake area of the impeller increases with the increase of the outlet angle;the main frequency of pressure pulsation is basically consistent with the shaft frequency,with a maximum decrease of 16.45% in pulsation amplitude at 0.95R0 and a maximum increase of 16.98% at 0.4R0.Based on the comprehensive entropy production and vibration characteristics,the optimal blade outlet angle range is proposed to be between 23°and 26°.Within this range,energy dissipation and pressure pulsation are relatively low,which can provide theoretical reference for the hydraulic design of centrifugal pump impellers.

centrifugal pump  /  blade outlet angle  /  entropy generation analysis  /  pressure pulsation
叶思成, 任启乐, 刘广兵, 夏添, 姚少毅, 贾晓奇. 叶片出口角对离心泵内部流动的影响研究. 流体机械, 2026 , 54 (3) : 82 -90 . DOI: 10.3969/j.issn.1005-0329.2026.03.010
Sicheng YE, Qile REN, Guangbing LIU, Tian XIA, Shaoyi YAO, Xiaoqi JIA. Study on the influence of blade outlet angle on the internal flow of centrifugal pumps[J]. Fluid Machinery, 2026 , 54 (3) : 82 -90 . DOI: 10.3969/j.issn.1005-0329.2026.03.010
Year 2026 volume 54 Issue 3
79
33
Cite this Article
BibTeX
Article Info
doi: 10.3969/j.issn.1005-0329.2026.03.010
  • Receive Date:2025-10-09
  • Online Date:2026-10-22
  • Published:2026-03-30
Article Data
Affiliations
History
  • Received:2025-10-09
  • Revised:2026-01-21
Affiliations
    1School of Mechanical Engineering,Zhejiang Sci-Tech University,Hangzhou 310018,China
    2Hefei General Machinery Research Institute,Hefei 230031,China
References
Share
https://castjournals.cast.org.cn/joweb/ltjx/EN/10.3969/j.issn.1005-0329.2026.03.010
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT