收藏切换
Study on influence of blade number on backflow characteristics of lifting pump
收藏切换
Xiaochen TANG1, Yang ZHAO2, Wei WU3, Houlin LIU2, Minggao TAN2, Jianzhen JIANG1
Fluid Machinery | 2026, 54(1) : 58 - 65
Less
收藏切换
Fluid Machinery | 2026, 54(1): 58-65
Study on influence of blade number on backflow characteristics of lifting pump
Full
Xiaochen TANG1, Yang ZHAO2, Wei WU3, Houlin LIU2, Minggao TAN2, Jianzhen JIANG1
Affiliations
  • 1Jiangsu Zhenhua Haike Equipment Technology Co.,Ltd.,Taizhou 225500,China
  • 2Research Center of Fluid Machinery Engineering and Technology,Jiangsu University,Zhenjiang 212013,China
  • 3Chengdu Hangsheng Electromechanical Co.,Ltd.,Chengdu 611730,China
Published: 2026-01-30 doi: 10.3969/j.issn.1005-0329.2026.01.008
Outline
收藏切换

To address the issue of flow channel blockage caused by mineral particle sedimentation and backflow in a lifting pump after an emergency pump shutdown,CFD-DEM coupling method was used to numerically simulate internal solid‑liquid two‑phase flow during pump shutdown backflow conditions.The effects of changes in the number of impeller blades and diffuser blades on particle concentration distribution,particle backflow time,particle collision behavior,and backflow pass‑through rate were analyzed,and the reliability of the numerical simulation was verified through experiments.The results show an increase in the number of blades exacerbates particle accumulation and collisions in the first‑stage diffuser;optimizing blade number matching can significantly improve performance.When the number of impeller blades is 3 and the number of diffuser blades increases from 4 to 5,particle collision count decreases by 28.18%,and backflow pass‑through rate increases by 2.56%;when the number of diffuser blades is 5,increasing the number of impeller blades from 3 to 4 further reduces collision count by 12.36% and increases backflow pass‑through rate by 4.48%.The research results provide a theoretical basis for optimizing the design of lifting pumps.

lifting pump  /  blade number  /  backflow characteristics  /  CFD-DEM coupling method
唐晓晨, 赵杨, 吴蔚, 刘厚林, 谈明高, 蒋建珍. 叶片数对扬矿泵回流性能的影响研究. 流体机械, 2026 , 54 (1) : 58 -65 . DOI: 10.3969/j.issn.1005-0329.2026.01.008
Xiaochen TANG, Yang ZHAO, Wei WU, Houlin LIU, Minggao TAN, Jianzhen JIANG. Study on influence of blade number on backflow characteristics of lifting pump[J]. Fluid Machinery, 2026 , 54 (1) : 58 -65 . DOI: 10.3969/j.issn.1005-0329.2026.01.008
Year 2026 volume 54 Issue 1
72
24
Cite this Article
BibTeX
Article Info
doi: 10.3969/j.issn.1005-0329.2026.01.008
  • Receive Date:2025-04-02
  • Online Date:2026-10-22
  • Published:2026-01-30
Article Data
Affiliations
History
  • Received:2025-04-02
  • Revised:2025-10-18
Affiliations
    1Jiangsu Zhenhua Haike Equipment Technology Co.,Ltd.,Taizhou 225500,China
    2Research Center of Fluid Machinery Engineering and Technology,Jiangsu University,Zhenjiang 212013,China
    3Chengdu Hangsheng Electromechanical Co.,Ltd.,Chengdu 611730,China
References
Share
https://castjournals.cast.org.cn/joweb/ltjx/EN/10.3969/j.issn.1005-0329.2026.01.008
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT