收藏切换
Study on heat transfer effect of chip heat sink based on metal foam and porous rib structure
收藏切换
Houcheng DING, Mengsheng SHAO, Quanlong DENG, Junjun FENG, Yingying XU
Fluid Machinery | 2025, 53(11) : 44 - 51
Less
收藏切换
Fluid Machinery | 2025, 53(11): 44-51
Study on heat transfer effect of chip heat sink based on metal foam and porous rib structure
Full
Houcheng DING, Mengsheng SHAO, Quanlong DENG, Junjun FENG, Yingying XU
Affiliations
  • School of Civil Engineering and Architecture,Anhui University of Technology,Ma'anshan 243032,China
Published: 2025-11-30 doi: 10.3969/j.issn.1005-0329.2025.11.006
Outline
收藏切换

To address the issue of insufficient heat transfer efficiency in traditional heat sinks caused by increasing chip power density,a novel chip heat sink based on the synergistic effect of metal foam and porous ribs is proposed.Through numerical simulation,a 3D composite structure was constructed (using metal foam as the background area and porous ribs as discrete arrays in hotspot areas),with peak temperature,temperature difference,pressure drop,and equivalent thermal resistance as evaluation indicators,comparing the performance of the new heat sink with traditional metal foam heat sinks and porous rib heat sinks.The results show that under the conditions of coolant inlet flow velocity of 0.1~0.4 m/s and porosity of 0.8,the new heat sink has the lowest peak temperature (36 ℃,2 ℃ lower than the metal foam heat sink and 1 ℃ lower than the porous rib heat sink),the smallest temperature difference (3 ℃,1 ℃ and 4 ℃ lower than the former two respectively),and the lowest equivalent thermal resistance (1.3 K/W,7.1% and 10.3% lower than the former two respectively);its pressure drop increase (300%) is lower than that of the porous rib heat sink (330%) and metal foam heat sink (302%),proving that the multi‑scale synergistic effect of metal foam and porous ribs can effectively improve heat dissipation performance.The research can provide references for the design of heat sinks for high‑power density chips.

heat sink  /  porous structure  /  microelectronic chip  /  numerical simulation
丁厚成, 邵梦胜, 邓权龙, 冯俊军, 许盈盈. 基于泡沫金属与多孔肋结构下的芯片散热器换热效果研究. 流体机械, 2025 , 53 (11) : 44 -51 . DOI: 10.3969/j.issn.1005-0329.2025.11.006
Houcheng DING, Mengsheng SHAO, Quanlong DENG, Junjun FENG, Yingying XU. Study on heat transfer effect of chip heat sink based on metal foam and porous rib structure[J]. Fluid Machinery, 2025 , 53 (11) : 44 -51 . DOI: 10.3969/j.issn.1005-0329.2025.11.006
Year 2025 volume 53 Issue 11
105
35
Cite this Article
BibTeX
Article Info
doi: 10.3969/j.issn.1005-0329.2025.11.006
  • Receive Date:2025-06-25
  • Online Date:2026-10-20
  • Published:2025-11-30
Article Data
Affiliations
History
  • Received:2025-06-25
  • Revised:2025-10-17
Affiliations
    School of Civil Engineering and Architecture,Anhui University of Technology,Ma'anshan 243032,China
References
Share
https://castjournals.cast.org.cn/joweb/ltjx/EN/10.3969/j.issn.1005-0329.2025.11.006
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT