收藏切换
Research on vibration suppression design of centrifugal exhaust fan
收藏切换
Miaogen WANG, Diegang LI, Meijun DAI, Sheng ZHAO, Fei HANG
Fluid Machinery | 2025, 53(9) : 112 - 118
Less
收藏切换
Fluid Machinery | 2025, 53(9): 112-118
Research on vibration suppression design of centrifugal exhaust fan
Full
Miaogen WANG, Diegang LI, Meijun DAI, Sheng ZHAO, Fei HANG
Affiliations
  • Zhejiang Jindun Fan Co.,Ltd.,Shaoxing 312363,China
Published: 2025-09-30 doi: 10.3969/j.issn.1005-0329.2025.09.015
Outline
收藏切换

In response to issues such as damage to bearing seats or motor bearings,as well as damage to blades and air ducts,caused by excessive vibration of exhaust fans,a vibration reduction method combining flow‑induced excitation suppression design and precision machining for centrifugal exhaust fans was proposed on the basis of traditional design and manufacturing.Using numerical simulation and experimental testing methods,the effects of airfoil‑shaped blades and circular‑section volutes on the flow state of flow‑induced excitation sources and structural strength were studied.The results show that there is no significant flow separation in the flow field near the surface of flow‑passing components.The vibration acceleration of circular section casing fans at blade frequency (483.3 Hz) is 8.3 dB lower than that of square section casing fans at blade frequency (773.3 Hz),and 9 dB lower in the overall vibration acceleration level (10~10 000 Hz).The adoption of high‑precision manufacturing processes (such as integral milling and welding) for the impeller effectively improve the uneven distribution of its mass center.Vibration test results show that the rotational fundamental frequency vibration acceleration at the machine feet reduce by approximately 11 dB,and the high‑frequency vibration is 8.5 dB lower than that of the original design.This study demonstrates that flow‑induced excitation suppression and precision machining methods can effectively reduce the vibration of exhaust fans,providing a reference for the vibration and noise reduction design of fans.

vibration noise  /  exhaust fan  /  airfoil‑shaped blade  /  circular cross‑section volute
王淼根, 李谍钢, 戴美军, 赵圣, 杭飞. 离心式排风机振动抑制设计研究. 流体机械, 2025 , 53 (9) : 112 -118 . DOI: 10.3969/j.issn.1005-0329.2025.09.015
Miaogen WANG, Diegang LI, Meijun DAI, Sheng ZHAO, Fei HANG. Research on vibration suppression design of centrifugal exhaust fan[J]. Fluid Machinery, 2025 , 53 (9) : 112 -118 . DOI: 10.3969/j.issn.1005-0329.2025.09.015
Year 2025 volume 53 Issue 9
120
44
Cite this Article
BibTeX
Article Info
doi: 10.3969/j.issn.1005-0329.2025.09.015
  • Receive Date:2025-03-21
  • Online Date:2026-10-20
  • Published:2025-09-30
Article Data
Affiliations
History
  • Received:2025-03-21
  • Revised:2025-08-17
Affiliations
    Zhejiang Jindun Fan Co.,Ltd.,Shaoxing 312363,China
References
Share
https://castjournals.cast.org.cn/joweb/ltjx/EN/10.3969/j.issn.1005-0329.2025.09.015
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT