收藏切换
Effect of geometric dimensions of floating wear rings on centrifugal pump performance
收藏切换
Feixiang YANG, Hongfei WU, Xiaofeng LAI, Miaoyun WANG, Xuemei LI
Fluid Machinery | 2025, 53(7) : 47 - 52
Less
收藏切换
Fluid Machinery | 2025, 53(7): 47-52
Effect of geometric dimensions of floating wear rings on centrifugal pump performance
Full
Feixiang YANG, Hongfei WU, Xiaofeng LAI, Miaoyun WANG, Xuemei LI
Affiliations
  • Nanfang Pump Co.,Ltd.,Hangzhou 311107,China
Published: 2025-07-30 doi: 10.3969/j.issn.1005-0329.2025.07.007
Outline
收藏切换

In order to study the influence of geometric dimensions of floating ring on the head and efficiency of centrifugal pumps,five different sizes of floating ring were installed on the experimental pump for ZM65-40-125 centrifugal pump. When the length of the floating ring gap was the same and the width of the ring gap was changed (0.06,0.12,0.24 mm),and the width of the floating ring gap was the same but the length of the ring gap was changed(3,5,7 mm),the changes in pump flow rate and head were compared and analyzed;Calculate the theoretical leakage flow rate at the mouth ring and compare it with the test data.The results show that as the floating wear ring clearance width increases,both pump head and efficiency decrease.When clearance width increases from 0.06 mm to 0.24 mm,the maximum head reduction is 1.19 m and maximum efficiency reduction is 4.6%.As the floating wear ring clearance length shortens,both head and efficiency decrease.When clearance length decreases from 7 mm to 3 mm,the maximum head reduction is 0.38 m and maximum efficiency reduction is 1.78%,indicating insignificant decline.These trends are essentially consistent with calculated leakage flow comparisons.This study provides reference for designing centrifugal pumps with floating wear ring structures.

centrifugal pump  /  floating wear ring  /  clearance length of wear ring  /  clearance width of wear ring
杨飞翔, 吴宏飞, 赖晓锋, 王妙云, 李雪梅. 浮动式口环几何尺寸对离心泵性能的影响. 流体机械, 2025 , 53 (7) : 47 -52 . DOI: 10.3969/j.issn.1005-0329.2025.07.007
Feixiang YANG, Hongfei WU, Xiaofeng LAI, Miaoyun WANG, Xuemei LI. Effect of geometric dimensions of floating wear rings on centrifugal pump performance[J]. Fluid Machinery, 2025 , 53 (7) : 47 -52 . DOI: 10.3969/j.issn.1005-0329.2025.07.007
Year 2025 volume 53 Issue 7
73
24
Cite this Article
BibTeX
Article Info
doi: 10.3969/j.issn.1005-0329.2025.07.007
  • Receive Date:2024-12-05
  • Online Date:2026-10-20
  • Published:2025-07-30
Article Data
Affiliations
History
  • Received:2024-12-05
  • Revised:2025-05-15
Affiliations
    Nanfang Pump Co.,Ltd.,Hangzhou 311107,China
References
Share
https://castjournals.cast.org.cn/joweb/ltjx/EN/10.3969/j.issn.1005-0329.2025.07.007
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT