收藏切换
Dust removal study for finned‑tube heat exchangers based on jet airflow technology
收藏切换
Yong ZHAO, Guangxing MA, Chen CHANG, Yi HE, Wenyan YUAN, Siyuan HUO
Fluid Machinery | 2025, 53(6) : 1 - 8
Less
收藏切换
Fluid Machinery | 2025, 53(6): 1-8
Dust removal study for finned‑tube heat exchangers based on jet airflow technology
Full
Yong ZHAO, Guangxing MA, Chen CHANG, Yi HE, Wenyan YUAN, Siyuan HUO
Affiliations
  • College of Civil Engineering,Inner Mongolia University of Technology,Hohhot 010051,China
Published: 2025-06-30 doi: 10.3969/j.issn.1005-0329.2025.06.001
Outline
收藏切换

To address the heat transfer deterioration caused by dust accumulation on outdoor heat exchangers of air‑source heat pumps,a visual dust removal test rig was constructed.Using mixed particles with diameters of 10 µm and 20 µm,dust removal tests were conducted on plain finned‑tube heat exchangers at different jet angles and wind speeds.Results show that under frontal horizontal jetting,when wind speed reaches 21 m/s,dust removal rate reaches 97%.Under reverse horizontal jetting at 28 m/s,dust removal rate is 40%.At 16 m/s frontal jetting speed,during the initial stage,dust removal rate increases with rising airflow angle,reaching a maximum of 94.7% at approximately 30° above horizontal.When airflow angle further increases,dust removal rate begins to decline.Dust removal mass ratio at 21 m/s frontal jetting speed also peaks around 30° at 92.9%.These findings provide important references for optimizing dust removal strategies of air‑source heat pump outdoor heat exchangers.

air‑source heat pump  /  finned‑tube heat exchanger  /  jet airflow  /  dust removal rate  /  fouling coefficient
赵勇, 马广兴, 常琛, 何怡, 苑文燕, 霍思源. 基于喷射气流技术的翅片管换热器除灰研究. 流体机械, 2025 , 53 (6) : 1 -8 . DOI: 10.3969/j.issn.1005-0329.2025.06.001
Yong ZHAO, Guangxing MA, Chen CHANG, Yi HE, Wenyan YUAN, Siyuan HUO. Dust removal study for finned‑tube heat exchangers based on jet airflow technology[J]. Fluid Machinery, 2025 , 53 (6) : 1 -8 . DOI: 10.3969/j.issn.1005-0329.2025.06.001
Year 2025 volume 53 Issue 6
110
34
Cite this Article
BibTeX
Article Info
doi: 10.3969/j.issn.1005-0329.2025.06.001
  • Receive Date:2024-10-24
  • Online Date:2026-10-20
  • Published:2025-06-30
Article Data
Affiliations
History
  • Received:2024-10-24
  • Revised:2025-01-26
Affiliations
    College of Civil Engineering,Inner Mongolia University of Technology,Hohhot 010051,China
References
Share
https://castjournals.cast.org.cn/joweb/ltjx/EN/10.3969/j.issn.1005-0329.2025.06.001
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT