收藏切换
Study on the thermal performance test of diffusion‑bonded hybrid heat exchangers
收藏切换
Gaige YU, Yongdong CHEN, Bingchuan HAN, Xiaogen LIU
Fluid Machinery | 2025, 53(3) : 1 - 8
Less
收藏切换
Fluid Machinery | 2025, 53(3): 1-8
Study on the thermal performance test of diffusion‑bonded hybrid heat exchangers
Full
Gaige YU, Yongdong CHEN, Bingchuan HAN, Xiaogen LIU
Affiliations
  • Hefei General Machinery Research Institute Co.,Ltd.,Hefei 230031,China
Published: 2025-03-30 doi: 10.3969/j.issn.1005-0329.2025.03.001
Outline
收藏切换

This study investigates the thermal performance of diffusion‑bonded hybrid heat exchangers through wind tunnel experiments and numerical simulations. Comparative analysis was conducted on the adaptability of heat transfer and friction factor correlations obtained by different methods for stainless steel plain fins. Results indicate that the thermal load of the heat exchanger increases with rising air‑side velocity,while the pressure loss grows more significantly. When air velocity increases from 8.1 m/s to 28.2 m/s,the thermal load increases by 2.9 times,and the pressure loss escalates by 9.82 times. Within the air‑side Reynolds number range of 2 440≤Re≤8 502,the theoretical thermal load calculated using statistically derived Colburn factor correlations deviates by 0.34%~16.55% from numerical and experimental results. Theoretical pressure loss predictions show less than 3% deviation from measured values. The study verifies the accuracy of the heat transfer/friction factor correlations and numerical models,providing practical guidance for thermal design of single‑phase diffusion‑bonded hybrid heat exchangers.

diffusion bonding  /  hybrid heat exchanger  /  plate‑fin  /  zig‑zag channel
于改革, 陈永东, 韩冰川, 刘孝根. 扩散焊混合式换热器热工性能试验研究. 流体机械, 2025 , 53 (3) : 1 -8 . DOI: 10.3969/j.issn.1005-0329.2025.03.001
Gaige YU, Yongdong CHEN, Bingchuan HAN, Xiaogen LIU. Study on the thermal performance test of diffusion‑bonded hybrid heat exchangers[J]. Fluid Machinery, 2025 , 53 (3) : 1 -8 . DOI: 10.3969/j.issn.1005-0329.2025.03.001
Year 2025 volume 53 Issue 3
203
76
Cite this Article
BibTeX
Article Info
doi: 10.3969/j.issn.1005-0329.2025.03.001
  • Receive Date:2024-08-17
  • Online Date:2026-10-20
  • Published:2025-03-30
Article Data
Affiliations
History
  • Received:2024-08-17
  • Revised:2024-12-05
Affiliations
    Hefei General Machinery Research Institute Co.,Ltd.,Hefei 230031,China
References
Share
https://castjournals.cast.org.cn/joweb/ltjx/EN/10.3969/j.issn.1005-0329.2025.03.001
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT