收藏切换
Co-pyrolysis characteristics of biomass and polypropylene
收藏切换
PDF
Jiaqi Chen, Yunfei Wu, Yiming Wang, Yanpeng Ban, Lijun Jin, Haoquan Hu
Renewable Energy Resources | 2024, 42(8) : 994 - 1003
Less
收藏切换
Renewable Energy Resources | 2024, 42(8): 994-1003
Co-pyrolysis characteristics of biomass and polypropylene
Full
Jiaqi Chen, Yunfei Wu, Yiming Wang, Yanpeng Ban, Lijun Jin, Haoquan Hu
Affiliations
  • 1 Institute of Coal Chemical Engineering, School of Chemical Engineering Dalian University of Technology Dalian 116024 China
Published: 2024-08-20
Outline
收藏切换

To further understand the interaction in copyrolysis of biomass and waste plastics, the pyrolysis characteristics of poplar wood(PW) and the effect of polypropylene (PP) addition on the product distribution and composition of PW and PP co pyrolysis were studied by thermogravimetric analysis and fixed bed reactor. The results showed that 500 °C is the optimal temperature for PW pyrolysis to obtain tar product, and the maximum tar yield is 31.2%. The experimental value of the maximum weight loss rate of copyrolysis is slightly greater than the theoretical value in the low temperature range, and the peak temperature of the DTG curve in the high temperature range shifts to higher temperature zone. Copyrolysis of PW and PP has a positive synergistic effect on the generation of gas products, increasing the low heating value of gas products. Copyrolysis has a negative synergistic effect on the generation of tar. However, the oxygencontaining compounds (phenols, acids, ketones and furans) in tar decrease, and olefin compounds increase significantly. In addition, the degree of graphitization of copyrolytic char becomes higher.

biomass  /  polypropylene  /  co-pyrolysis  /  product distribution  /  synergistic effect
Jiaqi Chen, Yunfei Wu, Yiming Wang, Yanpeng Ban, Lijun Jin, Haoquan Hu. Co-pyrolysis characteristics of biomass and polypropylene[J]. Renewable Energy Resources, 2024 , 42 (8) : 994 -1003 .
Year 2024 volume 42 Issue 8
PDF
174
83
Cite this Article
BibTeX
Article Info
  • Receive Date:2023-01-13
  • Online Date:2025-07-22
  • Published:2024-08-20
Article Data
Affiliations
History
  • Received:2023-01-13
Funding
Affiliations
    1 Institute of Coal Chemical Engineering, School of Chemical Engineering Dalian University of Technology Dalian 116024 China
References
Share
https://castjournals.cast.org.cn/joweb/kzsny/EN/
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数

Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)

Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT