收藏切换
Optimization of Equipment Scheduling in Key Process and Stope Layout in Two-Section Continuous Mining of Daye Iron Mine
收藏切换
Qihu WANG1, Tianchao XU1, Zenggui ZHANG2, Guoquan ZHANG2, Yong ZHANG2, Qing FENG2
Mining Research and Development | 2025, 45(2) : 17 - 24
Less
收藏切换
Mining Research and Development | 2025, 45(2): 17-24
Optimization of Equipment Scheduling in Key Process and Stope Layout in Two-Section Continuous Mining of Daye Iron Mine
Full
Qihu WANG1, Tianchao XU1, Zenggui ZHANG2, Guoquan ZHANG2, Yong ZHANG2, Qing FENG2
Affiliations
  • 1.Faculty of Resources and Environmental Engineering, Wuhan University of Science and Technology, Wuhan, Hubei 430081, China
  • 2.WISCO Resources Group Daye Iron Mine Mining Co., Ltd., Huangshi, Hubei 435006, China
Published: 2025-02-25
Outline
收藏切换

Daye Iron Ore is in the continuous mining stage of −270 m to −360 m middle section, the remaining ore volume in the −270 m middle section is insufficient, and the stope production capacity will be insufficient in the early stage of −360 m middle section. According to the process characteristics of the upward horizontal layered cut and filling method and sublevel drilling and stage open stoping with subsequent filling, based on the distribution of each stope, the mining process and the current situation of the mining equipment in the −360 m middle section of Daye Iron Mine, the optimization model of stope mining equipment scheduling was established. The genetic algorithm was used to simulate the most compact process arrangement, and the maximum number of simultaneous stopes was solved based on the equipment utilization function. Two schemes of single-section mining and two-section mining were proposed. The results show that when the number of stopes that can be mined simultaneously in the section of −270 m is 3, and the number of stopes that can be mined simultaneously in the section of −360 m is 5, the maximum daily production capacity reaches 4 218 t/d. The scheme of the two-section mining is more efficient, with a more stable ore production and the annual production capacity of 1.437 million tons. The two optimized mining schemes are helpful to solve the problems of insufficient production capacity and unstable production during the two-section continuous mining of Daye Iron Mine.

Two-section continuous mining  /  Production capacity  /  Equipment scheduling  /  Stope layout  /  Scheme optimization
王其虎, 徐天超, 张增贵, 张国权, 张勇, 丰庆. 大冶铁矿两中段接续开采关键工序设备调度和采场布置优化. 矿业研究与开发, 2025 , 45 (2) : 17 -24 .
Qihu WANG, Tianchao XU, Zenggui ZHANG, Guoquan ZHANG, Yong ZHANG, Qing FENG. Optimization of Equipment Scheduling in Key Process and Stope Layout in Two-Section Continuous Mining of Daye Iron Mine[J]. Mining Research and Development, 2025 , 45 (2) : 17 -24 .
Year 2025 volume 45 Issue 2
61
32
Cite this Article
BibTeX
Article Info
  • Receive Date:2024-03-26
  • Online Date:2026-10-29
  • Published:2025-02-25
Article Data
Affiliations
History
  • Received:2024-03-26
Funding
Affiliations
    1.Faculty of Resources and Environmental Engineering, Wuhan University of Science and Technology, Wuhan, Hubei 430081, China
    2.WISCO Resources Group Daye Iron Mine Mining Co., Ltd., Huangshi, Hubei 435006, China
References
Share
https://castjournals.cast.org.cn/joweb/kyyjykf/EN/
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT