收藏切换
Study on the Influence of the Cutting Parameters of the Oscillating Cutting Disc on the Cutting Performance
收藏切换
PDF
Yunzhong JIANG1, 2, Zhengyu SUN1, 2, Wenjun MENG1, 2, Jiaqi LI1, 2, Zeping LIU3, 4
Mining Research and Development | 2025, 45(10) : 207 - 214
Less
收藏切换
Mining Research and Development | 2025, 45(10): 207-214
Study on the Influence of the Cutting Parameters of the Oscillating Cutting Disc on the Cutting Performance
Full
Yunzhong JIANG1, 2, Zhengyu SUN1, 2, Wenjun MENG1, 2, Jiaqi LI1, 2, Zeping LIU3, 4
Affiliations
  • 1.School of Mechanical Engineering, Taiyuan University of Science and Technology, Taiyuan, Shanxi 030024, China
  • 2.Shanxi Key Laboratory of Intelligent Logistics Equipment, Taiyuan, Shanxi 030024, China
  • 3.State Key Laboratory of Intelligent Mining Equipment Technology, Taiyuan, Shanxi 030032, China
  • 4.Shanxi TZCO Intelligent Mining Equipment Technology Co., Ltd., Taiyuan, Shanxi 030032, China
Published: 2025-10-25
Outline
收藏切换

In order to explore the influences of different cutting parameters on the cutting performance of the oscillating cutting disc, the Discrete Element Method was used to simulate the cutting process of the oscillating cutting disc, and the influences of eccentricity distance, oscillating frequency, feed rate and cutting depth on the cutting performance were studied. The results show that the average load of rock breaking with the oscillating cutting disc is obviously lower than that of the non-oscillating cutting disc. When the feed rate is 60 mm/s, 90 mm/s, 120 mm/s, 150 mm/s and 180 mm/s respectively, compared with the non-oscillating condition, the average load of the cutting disc under the oscillating condition is reduced by 37.37%, 44.19%, 57.47%, 60.32% and 61.25% respectively. Under the same condition, with the increase of eccentricity distance, the average load decreases firstly and then tends to be stable. With the increase of feed rate, the average load decreases gradually, and the maximum load increases gradually and then tends to be stable. When the feed rate is less than or equal to 90 mm/s, the average load increases with the increase of the oscillating frequency. When the feed rate is greater than 90 mm/s, the larger the oscillating frequency, the smaller the average load. When the cutting depth is 40 mm, the average load and the maximum load are the smallest. When the eccentricity distance, oscillating frequency, feed rate and cutting depth of the oscillating cutting disc are 3 mm, 60 Hz, 150 mm/s and 40 mm, the cutting performance is the best. The research results can provide a reference for the determination of the cutting parameters of the oscillating cutting disc.

Hard rock mining  /  Oscillating cutting disc  /  Cutting parameter  /  Cutting performance  /  Discrete Element Method
Yunzhong JIANG, Zhengyu SUN, Wenjun MENG, Jiaqi LI, Zeping LIU. Study on the Influence of the Cutting Parameters of the Oscillating Cutting Disc on the Cutting Performance[J]. Mining Research and Development, 2025 , 45 (10) : 207 -214 .
Year 2025 volume 45 Issue 10
PDF
69
36
Cite this Article
BibTeX
Article Info
  • Receive Date:2024-11-18
  • Online Date:2026-02-06
  • Published:2025-10-25
Article Data
Affiliations
History
  • Received:2024-11-18
Funding
Affiliations
    1.School of Mechanical Engineering, Taiyuan University of Science and Technology, Taiyuan, Shanxi 030024, China
    2.Shanxi Key Laboratory of Intelligent Logistics Equipment, Taiyuan, Shanxi 030024, China
    3.State Key Laboratory of Intelligent Mining Equipment Technology, Taiyuan, Shanxi 030032, China
    4.Shanxi TZCO Intelligent Mining Equipment Technology Co., Ltd., Taiyuan, Shanxi 030032, China
References
Share
https://castjournals.cast.org.cn/joweb/kyyjykf/EN/
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数

Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)

Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT