收藏切换
Microstructure and Properties of Al-0.65Mg-0.58Si-0.17Fe Alloy Prepared by Horizontal Continuous Casting, Continuous Extrusion and Drawing Process
收藏切换
PDF
Han ZHANG1, Xiangmao CHENG1, Cheng CHEN1, Shucai LAN1, Rui WANG2, Yazhou FAN2, Yongjia ZHANG3, Peng DANG3
Mining and Metallurgical Engineering | 2024, 44(5) : 174 - 178
Less
收藏切换
Mining and Metallurgical Engineering | 2024, 44(5): 174-178
MATERIALS
Microstructure and Properties of Al-0.65Mg-0.58Si-0.17Fe Alloy Prepared by Horizontal Continuous Casting, Continuous Extrusion and Drawing Process
Full
Han ZHANG1, Xiangmao CHENG1, Cheng CHEN1, Shucai LAN1, Rui WANG2, Yazhou FAN2, Yongjia ZHANG3, Peng DANG3
Affiliations
  • 1.Chaozhou Power Supply Bureau, Guangdong Power Grid Co., Ltd., Chaozhou 521000, Guangdong, China
  • 2.Electric Power Research Institute, Guangdong Power Grid Co., Ltd., Guangzhou 510030, Guangdong, China
  • 3.Shanghai Cable Research Institute Co., Ltd., Shanghai 200093, China
Published: 2024-10-01 doi: 10.3969/j.issn.0253-6099.2024.05.035
Outline
收藏切换

High-strength and high-conductivity Al-0.65Mg-0.58Si-0.17Fe alloy wire was prepared by adopting horizontal continuous casting process followed by continuous extrusion and drawing processes, and effects of such processing technique and heat treatment on microstructure, mechanical properties and conductivity of the prepared alloy were investigated. The results show that the processing technique of horizontal continuous casting plus continuous extrusion can improve the solid solubility in supersaturated alloy and lead to significantly grain refinement, and the following drawing process introduces high-dense dislocation, which changes the precipitation behavior of Mg2Si phase during the ageing treatment of the alloy. It is shown that Al-0.65Mg-0.58Si-0.17Fe alloy prepared by the processes of horizontal continuous casting, continuous extrusion and drawing is subjected to 3 hours of aging treatment at 155 ℃, resulting in its tensile strength of 335 MPa, elongation rate of 6.9%, and electrical conductivity of 55.7%IACS.

Al-Mg-Si alloy  /  horizontal continuous casting  /  continuous extrusion  /  drawing  /  aluminum alloy wire
Han ZHANG, Xiangmao CHENG, Cheng CHEN, Shucai LAN, Rui WANG, Yazhou FAN, Yongjia ZHANG, Peng DANG. Microstructure and Properties of Al-0.65Mg-0.58Si-0.17Fe Alloy Prepared by Horizontal Continuous Casting, Continuous Extrusion and Drawing Process[J]. Mining and Metallurgical Engineering, 2024 , 44 (5) : 174 -178 . DOI: 10.3969/j.issn.0253-6099.2024.05.035
Year 2024 volume 44 Issue 5
PDF
64
29
Cite this Article
BibTeX
Article Info
doi: 10.3969/j.issn.0253-6099.2024.05.035
  • Receive Date:2024-04-22
  • Online Date:2026-03-17
  • Published:2024-10-01
Article Data
Affiliations
History
  • Received:2024-04-22
Funding
Affiliations
    1.Chaozhou Power Supply Bureau, Guangdong Power Grid Co., Ltd., Chaozhou 521000, Guangdong, China
    2.Electric Power Research Institute, Guangdong Power Grid Co., Ltd., Guangzhou 510030, Guangdong, China
    3.Shanghai Cable Research Institute Co., Ltd., Shanghai 200093, China
References
Share
https://castjournals.cast.org.cn/joweb/kygczz/EN/10.3969/j.issn.0253-6099.2024.05.035
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数

Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)

Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT